From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] ARM: mach-shmobile: ap4evb: Add MMC support
Date: Thu, 13 May 2010 01:08:21 +0000 [thread overview]
Message-ID: <ubpcklibe.wl%kuninori.morimoto.gx@renesas.com> (raw)
In-Reply-To: <uhbpex68f.wl%morimoto.kuninori@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
This patch is depend on Goda-san's
"Add support MMCIF for SuperH" patch
arch/arm/mach-shmobile/board-ap4evb.c | 67 +++++++++++++++++++++++++++++++++
1 files changed, 67 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index a553c16..0e74161 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -26,6 +26,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/io.h>
@@ -107,6 +109,18 @@
* S39: bit2: off
*/
+/*
+ * MMC (CN7)
+ *
+ * J22 : 1-2: 1.8v for MMC
+ * 2-3: 3.3v for MMC
+ * SW1 : OFF
+ * SW33: bit1: OFF
+ * bit2: ON
+ * bit3: ON
+ * bit4: X
+ */
+
/* MTD */
static struct mtd_partition nor_flash_partitions[] = {
{
@@ -225,6 +239,46 @@ static struct platform_device keysc_device = {
},
};
+/* SH_MMCIF */
+static struct resource sh_mmcif_resources[] = {
+ [0] = {
+ .name = "SH_MMCIF",
+ .start = 0xE6BD0000,
+ .end = 0xE6BD00FF,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ /* MMC ERR */
+ .start = 198,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* MMC NOR */
+ .start = 199,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct sh_mmcif_plat_data sh_mmcif_plat = {
+ .sup_pclk = 0,
+ .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+ .caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_8_BIT_DATA |
+ MMC_CAP_NEEDS_POLL,
+};
+
+static struct platform_device sh_mmcif_device = {
+ .name = "sh_mmcif",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ .platform_data = &sh_mmcif_plat,
+ },
+ .num_resources = ARRAY_SIZE(sh_mmcif_resources),
+ .resource = sh_mmcif_resources,
+};
+
/* SDHI0 */
static struct resource sdhi0_resources[] = {
[0] = {
@@ -350,6 +404,7 @@ static struct platform_device *ap4evb_devices[] __initdata = {
&sdhi0_device,
&usb1_host_device,
&fsi_device,
+ &sh_mmcif_device
};
/* TouchScreen (Needs SW3 set to OFF) */
@@ -485,6 +540,18 @@ static void __init ap4evb_init(void)
gpio_request(GPIO_FN_IRQ28_123, NULL);
set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW);
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCD0_0, NULL);
+ gpio_request(GPIO_FN_MMCD0_1, NULL);
+ gpio_request(GPIO_FN_MMCD0_2, NULL);
+ gpio_request(GPIO_FN_MMCD0_3, NULL);
+ gpio_request(GPIO_FN_MMCD0_4, NULL);
+ gpio_request(GPIO_FN_MMCD0_5, NULL);
+ gpio_request(GPIO_FN_MMCD0_6, NULL);
+ gpio_request(GPIO_FN_MMCD0_7, NULL);
+ gpio_request(GPIO_FN_MMCCMD0, NULL);
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+
/* USB enable */
gpio_request(GPIO_FN_VBUS0_1, NULL);
gpio_request(GPIO_FN_IDIN_1_18, NULL);
--
1.7.0.4
next prev parent reply other threads:[~2010-05-13 1:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-02-18 7:44 [PATCH] ARM: mach-shmobile: ap4evb: Add SCIFA0 support Kuninori Morimoto
2010-02-18 8:58 ` [PATCH] ARM: mach-shmobile: ap4evb: Add tiny document Kuninori Morimoto
2010-02-18 9:32 ` [PATCH] ARM: mach-shmobile: ap4evb: Add SCIFA0 support Paul Mundt
2010-02-23 7:07 ` [PATCH] ARM: mach-shmobile: ap4evb: Add KEYSC support Kuninori Morimoto
2010-02-23 7:53 ` Kuninori Morimoto
2010-02-25 7:55 ` Paul Mundt
2010-03-12 10:07 ` [PATCH] ARM: mach-shmobile: ap4evb: Add SW43, SW3 tiny document Kuninori Morimoto
2010-05-13 1:08 ` [PATCH] ARM: mach-shmobile: ap4evb: Add FSI2 support Kuninori Morimoto
2010-05-13 1:08 ` Kuninori Morimoto [this message]
2010-05-20 3:16 ` Paul Mundt
2010-05-31 4:49 ` [PATCH] ARM: mach-shmobile: ap4evb: Add MMC support Paul Mundt
2010-06-04 3:15 ` [PATCH] ARM: mach-shmobile: ap4evb: Add LCD panel selection Kuninori Morimoto
2010-06-04 5:20 ` Paul Mundt
2010-07-14 7:01 ` [PATCH] ARM: mach-shmobile: ap4evb: Add ts_get_pendown_state for Kuninori Morimoto
2010-07-14 7:01 ` Kuninori Morimoto
2010-10-18 10:13 ` [PATCH] ARM: mach-shmobile: ap4evb: Add HDMI sound support Kuninori Morimoto
2010-10-31 14:54 ` Paul Mundt
2010-11-15 3:11 ` [PATCH] ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate Kuninori Morimoto
2010-11-15 5:43 ` Paul Mundt
2010-11-16 4:12 ` [PATCH] ARM: mach-shmobile: ap4evb: add fsib 44100Hz rate fixup Kuninori Morimoto
2010-11-16 4:30 ` Paul Mundt
2010-11-16 6:22 ` Kuninori Morimoto
2010-11-16 6:24 ` Paul Mundt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ubpcklibe.wl%kuninori.morimoto.gx@renesas.com \
--to=kuninori.morimoto.gx@renesas.com \
--cc=linux-sh@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).