From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Pierre G. Martineau" Subject: SMP APIC warning Date: Tue, 21 May 2002 22:10:14 -0400 Sender: linux-smp-owner@vger.kernel.org Message-ID: <000201c20135$cfd0b050$0300a8c0@draxel> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="----=_NextPart_000_0003_01C20114.48C15A40" Return-path: List-Id: To: linux-smp@vger.kernel.org This is a multi-part message in MIME format. ------=_NextPart_000_0003_01C20114.48C15A40 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Thought you might want to see this, in case you haven't yet. It's from a Tyan S2603 dual P4 XEON. Can you tell me why I can't build an SMP kernel on this machine whereas the distribution version of RH7.3 SMP runs fine? Regards, Pierre Martineau ------=_NextPart_000_0003_01C20114.48C15A40 Content-Type: application/octet-stream; name="dmesg" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg" Linux version 2.4.18-4smp (bhcompile@stripples.devel.redhat.com) (gcc = version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #1 SMP Thu May 2 = 18:32:34 EDT 2002=0A= BIOS-provided physical RAM map:=0A= BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)=0A= BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)=0A= BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)=0A= BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)=0A= BIOS-e820: 000000003fef0000 - 000000003feff000 (ACPI data)=0A= BIOS-e820: 000000003feff000 - 000000003ff00000 (ACPI NVS)=0A= BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)=0A= BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)=0A= BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)=0A= BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)=0A= 126MB HIGHMEM available.=0A= found SMP MP-table at 000f6bf0=0A= hm, page 000f6000 reserved twice.=0A= hm, page 000f7000 reserved twice.=0A= hm, page 0009f000 reserved twice.=0A= hm, page 000a0000 reserved twice.=0A= On node 0 totalpages: 261872=0A= zone(0): 4096 pages.=0A= zone(1): 225280 pages.=0A= zone(2): 32496 pages.=0A= ACPI: Searched entire block, no RSDP was found.=0A= ACPI: RSDP located at physical address c00f6b90=0A= RSD PTR v0 [PTLTD ]=0A= __va_range(0x3fefa08c, 0x68): idx=3D8 mapped at ffff6000=0A= ACPI table found: RSDT v1 [PTLTD RSDT 1540.0]=0A= __va_range(0x3fefeed4, 0x24): idx=3D8 mapped at ffff6000=0A= __va_range(0x3fefeed4, 0x74): idx=3D8 mapped at ffff6000=0A= ACPI table found: FACP v1 [ WOMBAT 1540.0]=0A= __va_range(0x3fefef48, 0x24): idx=3D8 mapped at ffff6000=0A= __va_range(0x3fefef48, 0x90): idx=3D8 mapped at ffff6000=0A= ACPI table found: APIC v1 [PTLTD APIC 1540.0]=0A= __va_range(0x3fefef48, 0x90): idx=3D8 mapped at ffff6000=0A= LAPIC (acpi_id[0x0000] id[0x0] enabled[1])=0A= CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16=0A= =0A= LAPIC (acpi_id[0x0001] id[0x6] enabled[1])=0A= CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:2] APIC version 16=0A= =0A= LAPIC (acpi_id[0x0002] id[0x1] enabled[1])=0A= CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:2] APIC version 16=0A= =0A= LAPIC (acpi_id[0x0003] id[0x7] enabled[1])=0A= CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:2] APIC version 16=0A= =0A= IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0])=0A= IOAPIC (id[0x3] address[0xfec80000] global_irq_base[0x18])=0A= INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])=0A= INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])=0A= LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])=0A= LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1])=0A= LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1])=0A= LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1])=0A= 4 CPUs total=0A= Local APIC address fee00000=0A= __va_range(0x3fefefd8, 0x24): idx=3D8 mapped at ffff6000=0A= __va_range(0x3fefefd8, 0x28): idx=3D8 mapped at ffff6000=0A= ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0]=0A= Enabling the CPU's according to the ACPI table=0A= Intel MultiProcessor Specification v1.4=0A= Virtual Wire compatibility mode.=0A= OEM ID: Product ID: HP_WOMBAT APIC at: 0xFEE00000=0A= I/O APIC #2 Version 32 at 0xFEC00000.=0A= I/O APIC #3 Version 32 at 0xFEC80000.=0A= Processors: 4=0A= Kernel command line: ro root=3D/dev/sda6 hda=3Dide-scsi hdc=3Dide-scsi=0A= ide_setup: hda=3Dide-scsi=0A= ide_setup: hdc=3Dide-scsi=0A= Initializing CPU#0=0A= Detected 2194.675 MHz processor.=0A= Console: colour VGA+ 80x25=0A= Calibrating delay loop... 4377.80 BogoMIPS=0A= Memory: 1029520k/1047488k available (1232k kernel code, 17576k reserved, = 842k data, 304k init, 129984k highmem)=0A= Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)=0A= Inode cache hash table entries: 65536 (order: 7, 524288 bytes)=0A= Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)=0A= Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)=0A= Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)=0A= CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0=0A= CPU: L1 I cache: 12K, L1 D cache: 8K=0A= CPU: L2 cache: 512K=0A= CPU: Physical Processor ID: 0=0A= CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000=0A= Intel machine check architecture supported.=0A= Intel machine check reporting enabled on CPU#0.=0A= CPU: After generic, caps: 3febfbff 00000000 00000000 00000000=0A= CPU: Common caps: 3febfbff 00000000 00000000 00000000=0A= Enabling fast FPU save and restore... done.=0A= Enabling unmasked SIMD FPU exception support... done.=0A= Checking 'hlt' instruction... OK.=0A= POSIX conformance testing by UNIFIX=0A= mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)=0A= mtrr: detected mtrr type: Intel=0A= CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0=0A= CPU: L1 I cache: 12K, L1 D cache: 8K=0A= CPU: L2 cache: 512K=0A= CPU: Physical Processor ID: 0=0A= CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000=0A= Intel machine check reporting enabled on CPU#0.=0A= CPU: After generic, caps: 3febfbff 00000000 00000000 00000000=0A= CPU: Common caps: 3febfbff 00000000 00000000 00000000=0A= CPU0: Intel(R) XEON(TM) CPU 2.20GHz stepping 04=0A= per-CPU timeslice cutoff: 1463.14 usecs.=0A= task migration cache decay timeout: 10 msecs.=0A= enabled ExtINT on CPU#0=0A= ESR value before enabling vector: 00000000=0A= ESR value after enabling vector: 00000000=0A= Booting processor 1/1 eip 2000=0A= Initializing CPU#1=0A= masked ExtINT on CPU#1=0A= ESR value before enabling vector: 00000000=0A= ESR value after enabling vector: 00000000=0A= Calibrating delay loop... 4377.80 BogoMIPS=0A= CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0=0A= CPU: L1 I cache: 12K, L1 D cache: 8K=0A= CPU: L2 cache: 512K=0A= CPU: Physical Processor ID: 0=0A= CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000=0A= Intel machine check reporting enabled on CPU#1.=0A= CPU: After generic, caps: 3febfbff 00000000 00000000 00000000=0A= CPU: Common caps: 3febfbff 00000000 00000000 00000000=0A= CPU1: Intel(R) XEON(TM) CPU 2.20GHz stepping 04=0A= Booting processor 2/6 eip 2000=0A= Initializing CPU#2=0A= masked ExtINT on CPU#2=0A= ESR value before enabling vector: 00000000=0A= ESR value after enabling vector: 00000000=0A= Calibrating delay loop... 4377.80 BogoMIPS=0A= CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0=0A= CPU: L1 I cache: 12K, L1 D cache: 8K=0A= CPU: L2 cache: 512K=0A= CPU: Physical Processor ID: 3=0A= CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000=0A= Intel machine check reporting enabled on CPU#2.=0A= CPU: After generic, caps: 3febfbff 00000000 00000000 00000000=0A= CPU: Common caps: 3febfbff 00000000 00000000 00000000=0A= CPU2: Intel(R) XEON(TM) CPU 2.20GHz stepping 04=0A= Booting processor 3/7 eip 2000=0A= Initializing CPU#3=0A= masked ExtINT on CPU#3=0A= ESR value before enabling vector: 00000000=0A= ESR value after enabling vector: 00000000=0A= Calibrating delay loop... 4377.80 BogoMIPS=0A= CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor =3D 0=0A= CPU: L1 I cache: 12K, L1 D cache: 8K=0A= CPU: L2 cache: 512K=0A= CPU: Physical Processor ID: 3=0A= CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000=0A= Intel machine check reporting enabled on CPU#3.=0A= CPU: After generic, caps: 3febfbff 00000000 00000000 00000000=0A= CPU: Common caps: 3febfbff 00000000 00000000 00000000=0A= CPU3: Intel(R) XEON(TM) CPU 2.20GHz stepping 04=0A= Total of 4 processors activated (17511.21 BogoMIPS).=0A= cpu_sibling_map[0] =3D 1=0A= cpu_sibling_map[1] =3D 0=0A= cpu_sibling_map[2] =3D 3=0A= cpu_sibling_map[3] =3D 2=0A= ENABLING IO-APIC IRQs=0A= Setting 2 in the phys_id_present_map=0A= ...changing IO-APIC physical APIC ID to 2 ... ok.=0A= Setting 3 in the phys_id_present_map=0A= ...changing IO-APIC physical APIC ID to 3 ... ok.=0A= init IO_APIC IRQs=0A= IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-12, 2-20, 2-22, 3-0, 3-1, 3-2, = 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, = 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23 not connected.=0A= ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D0=0A= number of MP IRQ sources: 24.=0A= number of IO-APIC #2 registers: 24.=0A= number of IO-APIC #3 registers: 24.=0A= testing the IO APIC.......................=0A= =0A= IO APIC #2......=0A= .... register #00: 02008000=0A= ....... : physical APIC id: 02=0A= WARNING: unexpected IO-APIC, please mail=0A= to linux-smp@vger.kernel.org=0A= .... register #01: 00178020=0A= ....... : max redirection entries: 0017=0A= ....... : PRQ implemented: 1=0A= ....... : IO APIC version: 0020=0A= .... register #02: 00000000=0A= ....... : arbitration: 00=0A= .... IRQ redirection table:=0A= NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =0A= 00 000 00 1 0 0 0 0 0 0 00=0A= 01 00F 0F 0 0 0 0 0 1 1 39=0A= 02 00F 0F 0 0 0 0 0 1 1 31=0A= 03 00F 0F 0 0 0 0 0 1 1 41=0A= 04 00F 0F 0 0 0 0 0 1 1 49=0A= 05 00F 0F 0 0 0 0 0 1 1 51=0A= 06 00F 0F 0 0 0 0 0 1 1 59=0A= 07 00F 0F 0 0 0 0 0 1 1 61=0A= 08 00F 0F 0 0 0 0 0 1 1 69=0A= 09 00F 0F 0 0 0 0 0 1 1 71=0A= 0a 000 00 1 0 0 0 0 0 0 00=0A= 0b 000 00 1 0 0 0 0 0 0 00=0A= 0c 000 00 1 0 0 0 0 0 0 00=0A= 0d 00F 0F 0 0 0 0 0 1 1 79=0A= 0e 00F 0F 0 0 0 0 0 1 1 81=0A= 0f 00F 0F 0 0 0 0 0 1 1 89=0A= 10 00F 0F 1 1 0 1 0 1 1 91=0A= 11 00F 0F 1 1 0 1 0 1 1 99=0A= 12 00F 0F 1 1 0 1 0 1 1 A1=0A= 13 00F 0F 1 1 0 1 0 1 1 A9=0A= 14 000 00 1 0 0 0 0 0 0 00=0A= 15 00F 0F 1 1 0 1 0 1 1 B1=0A= 16 000 00 1 0 0 0 0 0 0 00=0A= 17 00F 0F 1 1 0 1 0 1 1 B9=0A= =0A= IO APIC #3......=0A= .... register #00: 03000000=0A= ....... : physical APIC id: 03=0A= .... register #01: 00178020=0A= ....... : max redirection entries: 0017=0A= ....... : PRQ implemented: 1=0A= ....... : IO APIC version: 0020=0A= .... register #02: 03000000=0A= ....... : arbitration: 03=0A= .... IRQ redirection table:=0A= NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =0A= 00 000 00 1 0 0 0 0 0 0 00=0A= 01 000 00 1 0 0 0 0 0 0 00=0A= 02 000 00 1 0 0 0 0 0 0 00=0A= 03 000 00 1 0 0 0 0 0 0 00=0A= 04 000 00 1 0 0 0 0 0 0 00=0A= 05 000 00 1 0 0 0 0 0 0 00=0A= 06 000 00 1 0 0 0 0 0 0 00=0A= 07 000 00 1 0 0 0 0 0 0 00=0A= 08 000 00 1 0 0 0 0 0 0 00=0A= 09 000 00 1 0 0 0 0 0 0 00=0A= 0a 000 00 1 0 0 0 0 0 0 00=0A= 0b 000 00 1 0 0 0 0 0 0 00=0A= 0c 000 00 1 0 0 0 0 0 0 00=0A= 0d 000 00 1 0 0 0 0 0 0 00=0A= 0e 000 00 1 0 0 0 0 0 0 00=0A= 0f 000 00 1 0 0 0 0 0 0 00=0A= 10 000 00 1 0 0 0 0 0 0 00=0A= 11 000 00 1 0 0 0 0 0 0 00=0A= 12 000 00 1 0 0 0 0 0 0 00=0A= 13 000 00 1 0 0 0 0 0 0 00=0A= 14 000 00 1 0 0 0 0 0 0 00=0A= 15 000 00 1 0 0 0 0 0 0 00=0A= 16 000 00 1 0 0 0 0 0 0 00=0A= 17 000 00 1 0 0 0 0 0 0 00=0A= IRQ to pin mappings:=0A= IRQ0 -> 0:2=0A= IRQ1 -> 0:1=0A= IRQ3 -> 0:3=0A= IRQ4 -> 0:4=0A= IRQ5 -> 0:5=0A= IRQ6 -> 0:6=0A= IRQ7 -> 0:7=0A= IRQ8 -> 0:8=0A= IRQ9 -> 0:9=0A= IRQ13 -> 0:13=0A= IRQ14 -> 0:14=0A= IRQ15 -> 0:15=0A= IRQ16 -> 0:16=0A= IRQ17 -> 0:17=0A= IRQ18 -> 0:18=0A= IRQ19 -> 0:19=0A= IRQ21 -> 0:21=0A= IRQ23 -> 0:23=0A= .................................... done.=0A= Using local APIC timer interrupts.=0A= calibrating APIC timer ...=0A= ..... CPU clock speed is 2194.5197 MHz.=0A= ..... host bus clock speed is 99.7507 MHz.=0A= cpu: 0, clocks: 997507, slice: 199501=0A= CPU0=0A= cpu: 1, clocks: 997507, slice: 199501=0A= cpu: 3, clocks: 997507, slice: 199501=0A= cpu: 2, clocks: 997507, slice: 199501=0A= CPU1=0A= CPU2=0A= CPU3=0A= checking TSC synchronization across CPUs: passed.=0A= PCI: PCI BIOS revision 2.10 entry at 0xfd8fb, last bus=3D4=0A= PCI: Using configuration type 1=0A= PCI: Probing PCI hardware=0A= Unknown bridge resource 0: assuming transparent=0A= Unknown bridge resource 2: assuming transparent=0A= Unknown bridge resource 2: assuming transparent=0A= Unknown bridge resource 2: assuming transparent=0A= PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0=0A= PCI->APIC IRQ transform: (B0,I31,P3) -> 19=0A= PCI->APIC IRQ transform: (B0,I31,P1) -> 17=0A= PCI->APIC IRQ transform: (B1,I0,P0) -> 16=0A= PCI->APIC IRQ transform: (B3,I8,P0) -> 23=0A= PCI->APIC IRQ transform: (B3,I8,P1) -> 19=0A= PCI->APIC IRQ transform: (B4,I6,P0) -> 18=0A= PCI->APIC IRQ transform: (B4,I6,P1) -> 19=0A= PCI->APIC IRQ transform: (B4,I9,P0) -> 19=0A= PCI->APIC IRQ transform: (B4,I9,P0) -> 19=0A= PCI->APIC IRQ transform: (B4,I13,P0) -> 21=0A= isapnp: Scanning for PnP cards...=0A= isapnp: No Plug & Play device found=0A= Linux NET4.0 for Linux 2.4=0A= Based upon Swansea University Computer Society NET3.039=0A= Initializing RT netlink socket=0A= apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)=0A= apm: disabled - APM is not SMP safe.=0A= Starting kswapd=0A= allocated 64 pages and 64 bhs reserved for the highmem bounces=0A= VFS: Diskquotas version dquot_6.5.0 initialized=0A= Detected PS/2 Mouse Port.=0A= pty: 2048 Unix98 ptys configured=0A= Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT = SHARE_IRQ SERIAL_PCI ISAPNP enabled=0A= ttyS00 at 0x03f8 (irq =3D 4) is a 16550A=0A= ttyS01 at 0x02f8 (irq =3D 3) is a 16550A=0A= ttyS04 at port 0x3080 (irq =3D 19) is a 16C950/954=0A= ttyS05 at port 0x3088 (irq =3D 19) is a 16C950/954=0A= ttyS06 at port 0x3090 (irq =3D 19) is a 16C950/954=0A= ttyS07 at port 0x3098 (irq =3D 19) is a 16C950/954=0A= Real Time Clock Driver v1.10e=0A= block: 1024 slots per queue, batch=3D256=0A= Uniform Multi-Platform E-IDE driver Revision: 6.31=0A= ide: Assuming 33MHz system bus speed for PIO modes; override with = idebus=3Dxx=0A= PIIX4: IDE controller on PCI bus 00 dev f9=0A= PIIX4: chipset revision 4=0A= PIIX4: not 100% native mode: will probe irqs later=0A= ide0: BM-DMA at 0x10a0-0x10a7, BIOS settings: hda:DMA, hdb:pio=0A= ide1: BM-DMA at 0x10a8-0x10af, BIOS settings: hdc:DMA, hdd:pio=0A= hda: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive=0A= hdc: PIONEER DVD-RW DVR-104, ATAPI CD/DVD-ROM drive=0A= ide0 at 0x1f0-0x1f7,0x3f6 on irq 14=0A= ide1 at 0x170-0x177,0x376 on irq 15=0A= ide-floppy driver 0.99.newide=0A= Floppy drive(s): fd0 is 1.44M=0A= FDC 0 is a National Semiconductor PC87306=0A= RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize=0A= ide-floppy driver 0.99.newide=0A= md: md driver 0.90.0 MAX_MD_DEVS=3D256, MD_SB_DISKS=3D27=0A= md: Autodetecting RAID arrays.=0A= md: autorun ...=0A= md: ... autorun DONE.=0A= pci_hotplug: PCI Hot Plug PCI Core version: 0.4=0A= NET4: Linux TCP/IP 1.0 for NET4.0=0A= IP Protocols: ICMP, UDP, TCP, IGMP=0A= IP: routing cache hash table of 8192 buckets, 64Kbytes=0A= TCP: Hash tables configured (established 262144 bind 65536)=0A= Linux IP multicast router 0.06 plus PIM-SM=0A= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.=0A= RAMDISK: Compressed image found at block 0=0A= Freeing initrd memory: 160k freed=0A= VFS: Mounted root (ext2 filesystem).=0A= SCSI subsystem driver Revision: 1.00=0A= kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno =3D 2=0A= sym53c8xx: at PCI bus 3, device 8, function 0=0A= sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)=0A= sym53c8xx: 53c1010-66 detected with Symbios NVRAM=0A= sym53c8xx: at PCI bus 3, device 8, function 1=0A= sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)=0A= sym53c8xx: 53c1010-66 detected with Symbios NVRAM=0A= sym53c1010-66-0: rev 0x1 on pci bus 3 device 8 function 0 irq 23=0A= sym53c1010-66-0: Symbios format NVRAM, ID 7, Fast-80, Parity Checking=0A= sym53c1010-66-0: on-chip RAM at 0xe1000000=0A= sym53c1010-66-0: restart (scsi reset).=0A= sym53c1010-66-0: handling phase mismatch from SCRIPTS.=0A= sym53c1010-66-0: Downloading SCSI SCRIPTS.=0A= sym53c1010-66-1: rev 0x1 on pci bus 3 device 8 function 1 irq 19=0A= sym53c1010-66-1: Symbios format NVRAM, ID 7, Fast-80, Parity Checking=0A= sym53c1010-66-1: on-chip RAM at 0xe1002000=0A= sym53c1010-66-1: restart (scsi reset).=0A= sym53c1010-66-1: handling phase mismatch from SCRIPTS.=0A= sym53c1010-66-1: Downloading SCSI SCRIPTS.=0A= scsi0 : sym53c8xx-1.7.3c-20010512=0A= scsi1 : sym53c8xx-1.7.3c-20010512=0A= blk: queue f7fd4e18, I/O limit 4095Mb (mask 0xffffffff)=0A= Vendor: SEAGATE Model: ST336752LW Rev: 0004=0A= Type: Direct-Access ANSI SCSI revision: 03=0A= blk: queue f7fd4c18, I/O limit 4095Mb (mask 0xffffffff)=0A= sym53c1010-66-0-<0,0>: tagged command queue depth set to 8=0A= Attached scsi disk sda at scsi0, channel 0, id 0, lun 0=0A= sym53c1010-66-0-<0,*>: FAST-80 WIDE SCSI 160.0 MB/s (12.5 ns, offset 62)=0A= SCSI device sda: 71687369 512-byte hdwr sectors (36704 MB)=0A= Partition check:=0A= sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4=0A= Freeing unused kernel memory: 304k freed=0A= Adding Swap: 1028120k swap-space (priority -1)=0A= usb.c: registered new driver usbdevfs=0A= usb.c: registered new driver hub=0A= usb-uhci.c: $Revision: 1.275 $ time 18:40:49 May 2 2002=0A= usb-uhci.c: High bandwidth mode enabled=0A= PCI: Setting latency timer of device 00:1f.2 to 64=0A= usb-uhci.c: USB UHCI at I/O 0x1080, IRQ 19=0A= usb-uhci.c: Detected 2 ports=0A= usb.c: new USB bus registered, assigned bus number 1=0A= hub.c: USB hub found=0A= hub.c: 2 ports detected=0A= usb-uhci.c: v1.275:USB Universal Host Controller Interface driver=0A= hub.c: USB new device connect on bus1/1, assigned device number 2=0A= usb.c: USB device 2 (vend/prod 0x46d/0xc00c) is not claimed by any = active driver.=0A= usb.c: registered new driver hiddev=0A= usb.c: registered new driver hid=0A= input0: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0=0A= hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik =0A= hid-core.c: USB HID support drivers=0A= mice: PS/2 mouse device common for all mice=0A= scsi2 : SCSI host adapter emulation for IDE ATAPI devices=0A= Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.01=0A= Type: CD-ROM ANSI SCSI revision: 02=0A= Vendor: PIONEER Model: DVD-RW DVR-104 Rev: 1.20=0A= Type: CD-ROM ANSI SCSI revision: 02=0A= hda: DMA disabled=0A= hdc: DMA disabled=0A= ------=_NextPart_000_0003_01C20114.48C15A40--