From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Michael Bishop" Subject: WARNING: unexpected IO-APIC, please mail Date: Thu, 15 May 2003 18:03:51 -0400 Sender: linux-smp-owner@vger.kernel.org Message-ID: <000e01c31b2d$df422c40$0564a8c0@TOSHIBA> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org 00000000 00000000 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU2: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3986.55 BogoMIPS CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU3: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Total of 4 processors activated (15913.81 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 008 08 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 00F 0F 0 0 0 0 0 1 1 51 07 00F 0F 0 0 0 0 0 1 1 59 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 71 0d 00F 0F 0 0 0 0 0 1 1 79 0e 00F 0F 0 0 0 0 0 1 1 81 0f 00F 0F 0 0 0 0 0 1 1 89 10 00F 0F 1 1 0 1 0 1 1 91 11 00F 0F 1 1 0 1 0 1 1 99 12 000 00 1 0 0 0 0 0 0 00 13 00F 0F 1 1 0 1 0 1 1 A1 14 00F 0F 1 1 0 1 0 1 1 A9 15 00F 0F 1 1 0 1 0 1 1 B1 16 00F 0F 1 1 0 1 0 1 1 B9 17 00F 0F 1 1 0 1 0 1 1 C1 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1993.0349 MHz. ..... host bus clock speed is 99.1286 MHz. cpu: 0, clocks: 194633, slice: 38926 CPU0 cpu: 1, clocks: 194633, slice: 38926 cpu: 3, clocks: 194633, slice: 38926 cpu: 2, clocks: 194633, slice: 38926 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 PCI: PCI BIOS revision 2.10 entry at 0xfd921, last bus=4 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B4,I3,P0) -> 21 PCI->APIC IRQ transform: (B4,I4,P0) -> 20 PCI->APIC IRQ transform: (B4,I5,P0) -> 23 PCI->APIC IRQ transform: (B4,I6,P0) -> 22 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS not found. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e oprofile: can't get RTC I/O Ports block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x7040-0x7047, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x7048-0x704f, BIOS settings: hdc:pio, hdd:pio PDC20267: IDE controller on PCI bus 04 dev 30 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide2: BM-DMA at 0x8480-0x8487, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x8488-0x848f, BIOS settings: hdg:pio, hdh:pio hda: WDC WD1200JB-75CRA0, ATA DISK drive hdc: WDC WD1200JB-00DUA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c0415f44, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0415f44, I/O limit 4095Mb (mask 0xffffffff) hda: setmax LBA 234441648, native 234375000 hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=14589/255/63, UDMA(100) blk: queue c04162a0, I/O limit 4095Mb (mask 0xffffffff) blk: queue c04162a0, I/O limit 4095Mb (mask 0xffffffff) hdc: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=14593/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdc: hdc1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 117k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 188k freed Adding Swap: 2048276k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 06:15:20 Mar 14 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x7000, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x7020, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal blk: queue c0415f44, I/O limit 4095Mb (mask 0xffffffff) blk: queue c04162a0, I/O limit 4095Mb (mask 0xffffffff) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others divert: allocating divert_blk for eth0 eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:B0:82:74, IRQ 20. Board assembly ffffff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). divert: allocating divert_blk for eth1 eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:B0:82:5B, IRQ 23. Board assembly ffffff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). I've stopped 11,048 spam messages. You can too! Get your free, safe spam protection at www.cloudmark.com