From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mattias Kregert" Subject: WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org Date: Tue, 27 May 2003 07:53:14 +0200 Sender: linux-smp-owner@vger.kernel.org Message-ID: <002b01c32414$44d288e0$09000a0a@kregert.se> Mime-Version: 1.0 Content-Transfer-Encoding: 7BIT Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org Good morning, I think you might be interested in this log. My hardware: - - - - - - - Motherboard: Abit IC7 Chipset: Intel 82875P (MCH) + 82801EB (ICH5R) Memory: 2 x DDR400 256MB CAS 2.5 (Dual DDR Mode Enabled) CPU: 1 x Pentium-4 2.4Ghz 800Mhz PSB Please send me a mail if you need more information. /Mattias -------- BOOT LOG -------- ---snip--- ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 69 0d 001 01 0 0 0 0 0 1 1 71 0e 001 01 0 0 0 0 0 1 1 79 0f 001 01 0 0 0 0 0 1 1 81 10 001 01 1 1 0 1 0 1 1 89 11 001 01 1 1 0 1 0 1 1 91 12 001 01 1 1 0 1 0 1 1 99 13 001 01 1 1 0 1 0 1 1 A1 14 001 01 1 1 0 1 0 1 1 A9 15 001 01 1 1 0 1 0 1 1 B1 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 B9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2405.3789 MHz. ..... host bus clock speed is 200.4481 MHz. cpu: 0, clocks: 2004481, slice: 1002240 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb730, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B2,I2,P0) -> 18 PCI->APIC IRQ transform: (B2,I4,P0) -> 20 PCI->APIC IRQ transform: (B2,I5,P0) -> 21 ---snip---