From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Joshua McClintock" Subject: WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org Date: Sat, 3 May 2003 00:54:53 -0700 Sender: linux-smp-owner@vger.kernel.org Message-ID: <003001c31149$489c6640$c80a0a0a@zoolander> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org Let me know if you need any more system information. **************************************************************** Linux version 2.4.19 (root@zeus.singlestep.com) (gcc version 3.2.2 20021212 (Debian prerelease)) #27 SMP Sat May 3 00:19:00 PDT 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009e000 (usable) BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007feff000 (ACPI data) BIOS-e820: 000000007feff000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6a10 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524160 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294784 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f6a40 RSD PTR v0 [PTLTD ] __va_range(0x7fefb835, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [PTLTD RSDT 1540.0] __va_range(0x7fefee78, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefee78, 0x74): idx=8 mapped at ffff6000 ACPI table found: FACP v1 [Intel SE7500CW 1540.0] __va_range(0x7fefeeec, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefeeec, 0x50): idx=8 mapped at ffff6000 ACPI table found: SPCR v1 [PTLTD $UCRTBL$ 1540.0] __va_range(0x7fefef3c, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefef3c, 0x9c): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [PTLTD APIC 1540.0] __va_range(0x7fefef3c, 0x9c): idx=8 mapped at ffff6000 LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16 LAPIC (acpi_id[0x0001] id[0x6] enabled[1]) CPU 1 (0x0600) enabledProcessor #6 Unknown CPU [15:2] APIC version 16 LAPIC (acpi_id[0x0002] id[0x1] enabled[1]) CPU 2 (0x0100) enabledProcessor #1 Unknown CPU [15:2] APIC version 16 LAPIC (acpi_id[0x0003] id[0x7] enabled[1]) CPU 3 (0x0700) enabledProcessor #7 Unknown CPU [15:2] APIC version 16 IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) IOAPIC (id[0x3] address[0xfec80000] global_irq_base[0x18]) IOAPIC (id[0x4] address[0xfec80400] global_irq_base[0x30]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1]) 4 CPUs total Local APIC address fee00000 __va_range(0x7fefefd8, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefefd8, 0x28): idx=8 mapped at ffff6000 ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0] Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: SE7500CW2 APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80400. Processors: 4 Kernel command line: auto BOOT_IMAGE=Linux ro root=801 devfs=mount Initializing CPU#0 Detected 1794.204 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3578.26 BogoMIPS Memory: 2068428k/2096640k available (1876k kernel code, 27756k reserved, 585k data, 116k init, 1179072k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07 per-CPU timeslice cutoff: 1462.89 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3578.26 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3578.26 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU2: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3578.26 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU3: Intel(R) Xeon(TM) CPU 1.80GHz stepping 07 Total of 4 processors activated (14313.06 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-3, 2-10, 2-11, 2-16, 2-18, 2-19, 2-22, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 18. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 31 03 000 00 1 0 0 0 0 0 0 00 04 00F 0F 0 0 0 0 0 1 1 41 05 00F 0F 0 0 0 0 0 1 1 49 06 00F 0F 0 0 0 0 0 1 1 51 07 00F 0F 0 0 0 0 0 1 1 59 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 71 0d 00F 0F 0 0 0 0 0 1 1 79 0e 00F 0F 0 0 0 0 0 1 1 81 0f 00F 0F 0 0 0 0 0 1 1 89 10 000 00 1 0 0 0 0 0 0 00 11 00F 0F 1 1 0 1 0 1 1 91 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 00F 0F 1 1 0 1 0 1 1 99 15 00F 0F 1 1 0 1 0 1 1 A1 16 000 00 1 0 0 0 0 0 0 00 17 00F 0F 1 1 0 1 0 1 1 A9 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 00F 0F 1 1 0 1 0 1 1 B1 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ17 -> 0:17 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ23 -> 0:23 IRQ48 -> 2:0 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1794.2606 MHz. ..... host bus clock speed is 99.6809 MHz. cpu: 0, clocks: 996809, slice: 199361 CPU0 cpu: 1, clocks: 996809, slice: 199361 cpu: 2, clocks: 996809, slice: 199361 cpu: 3, clocks: 996809, slice: 199361 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0xe) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfd921, last bus=4 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent Unknown bridge resource 0: assuming transparent Unknown bridge resource 1: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 2: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I31,P0) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B3,I1,P0) -> 48 PCI->APIC IRQ transform: (B4,I3,P0) -> 21 PCI->APIC IRQ transform: (B4,I4,P0) -> 20 PCI->APIC IRQ transform: (B4,I5,P0) -> 23 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller on PCI bus 00 dev f9 ICH3: detected chipset, but driver not compiled in! PCI: Device 00:1f.1 not available because of resource collisions ICH3: (ide_setup_pci_device:) Could not enable device. hdc: SR244W, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:AF:CC:76, IRQ 20. Board assembly ffffff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). eth1: OEM i82557/i82558 10/100 Ethernet, 00:02:B3:AF:CC:5D, IRQ 23. Board assembly ffffff-255, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. Secondary interface chip i82555. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0xb874c1d3). SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices 3ware Storage Controller device driver for Linux v1.02.00.025. scsi1 : Found a 3ware Storage Controller at 0x8000, IRQ: 48, P-chip: 1.3 scsi1 : 3ware Storage Controller Vendor: 3ware Model: 3w-xxxx Rev: 1.0 Type: Direct-Access ANSI SCSI revision: 00 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sda: -2053770240 512-byte hdwr sectors (47981 MB) Partition check: /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4 usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack (8192 buckets, 65536 max) ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. reiserfs: checking transaction log (device 08:01) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 116k freed Adding Swap: 1028152k swap-space (priority -1) reiserfs: checking transaction log (device 08:03) ... Using r5 hash to sort names ReiserFS version 3.6.25 reiserfs: checking transaction log (device 08:04) ... Using r5 hash to sort names ReiserFS version 3.6.25