From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alfonso Abeger Subject: Unexpected IO-APIC Date: 01 Sep 2003 14:31:47 +0200 Sender: linux-smp-owner@vger.kernel.org Message-ID: <1062419425.426.19.camel@Corruscant> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-8DOrqN19Q4no2KV1dKOa" Return-path: List-Id: To: linux-smp@vger.kernel.org --=-8DOrqN19Q4no2KV1dKOa Content-Type: text/plain Content-Transfer-Encoding: 7bit Hello. I'm testing kernel 2.4.22 on my computer and I've got the following message at start: An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org I've attached the out of the dmesg command for more information. I've not detected anything wrong on my computer. If you need more information about the system, please mail me and I'll try to help you. Kind regards. Alfonso --=-8DOrqN19Q4no2KV1dKOa Content-Disposition: attachment; filename=dmesg_out.txt Content-Transfer-Encoding: quoted-printable Content-Type: text/plain; name=dmesg_out.txt; charset=ISO-8859-15 Linux version 2.4.22 (root@Corruscant) (gcc version 2.95.4 20011002 (Debian= prerelease)) #1 vie ago 29 14:28:26 CEST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 On node 0 totalpages: 131068 zone(0): 4096 pages. zone(1): 126972 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f7a00 ACPI: RSDT (v001 ASUS P4S-LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc000 ACPI: FADT (v001 ASUS P4S-LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc100 ACPI: BOOT (v001 ASUS P4S-LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc040 ACPI: MADT (v001 ASUS P4S-LA 0x42302e31 MSFT 0x31313031) @ 0x1fffc080 ACPI: DSDT (v001 ASUS P4S-LA 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x1] trigger[0x1] lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x= 1]) ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x= 3]) Using ACPI (MADT) for SMP configuration information Kernel command line: auto BOOT_IMAGE=3DPrueba ro root=3D341 hdc=3Dscsi hdd= =3Dscsi ide_setup: hdc=3Dscsi ide_setup: hdd=3Dscsi Initializing CPU#0 Detected 2400.124 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4784.12 BogoMIPS Memory: 515420k/524272k available (1637k kernel code, 8464k reserved, 707k = data, 112k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 n= ot connected. ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D0 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178000 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0000 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 1 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2400.0515 MHz. ..... host bus clock speed is 133.3360 MHz. cpu: 0, clocks: 1333360, slice: 666680 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030813 PCI: PCI BIOS revision 2.10 entry at 0xf1360, last bus=3D1 PCI: Using configuration type 1 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquire= d Parsing all Control Methods:...............................................= ...................................................................... Table [DSDT](id F004) - 304 Objects with 43 Devices 117 Methods 8 Regions ACPI Namespace successfully loaded at root c038be5c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successf= ul evgpeblk-0748 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 00= 0000000000E420 on int 9 evgpeblk-0748 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 00= 0000000000E430 on int 9 Completing Region/Field/Buffer/Package initialization:.....................= ..................... Initialized 8/8 Regions 0/0 Fields 23/23 Buffers 11/11 Packages (312 nodes) Executing all Device _STA and_INI methods:.................................= ........... 44 Devices found containing: 44 _STA, 0 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S3 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at = IRQ 9) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at = IRQ 9) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15, enabled at = IRQ 9) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware IOAPIC[0]: Set PCI routing entry (2-23 -> 0xa9 -> IRQ 23 Mode:1 Active:1) 00:00:02[A] -> 2-23 -> IRQ 23 IOAPIC[0]: Set PCI routing entry (2-22 -> 0xb1 -> IRQ 22 Mode:1 Active:1) 00:00:02[B] -> 2-22 -> IRQ 22 IOAPIC[0]: Set PCI routing entry (2-21 -> 0xb9 -> IRQ 21 Mode:1 Active:1) 00:00:02[C] -> 2-21 -> IRQ 21 IOAPIC[0]: Set PCI routing entry (2-20 -> 0xc1 -> IRQ 20 Mode:1 Active:1) 00:00:02[D] -> 2-20 -> IRQ 20 Pin 2-22 already programmed IOAPIC[0]: Set PCI routing entry (2-17 -> 0xc9 -> IRQ 17 Mode:1 Active:1) 00:00:0e[A] -> 2-17 -> IRQ 17 IOAPIC[0]: Set PCI routing entry (2-18 -> 0xd1 -> IRQ 18 Mode:1 Active:1) 00:00:0e[B] -> 2-18 -> IRQ 18 IOAPIC[0]: Set PCI routing entry (2-19 -> 0xd9 -> IRQ 19 Mode:1 Active:1) 00:00:0e[C] -> 2-19 -> IRQ 19 IOAPIC[0]: Set PCI routing entry (2-16 -> 0xe1 -> IRQ 16 Mode:1 Active:1) 00:00:0e[D] -> 2-16 -> IRQ 16 Pin 2-18 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-19 already programmed Pin 2-16 already programmed Pin 2-17 already programmed Pin 2-18 already programmed Pin 2-16 already programmed Pin 2-17 already programmed PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=3Dnoacpi' or even 'a= cpi=3Doff' Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_P= CI enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (134d,7892,134d,0001) and the manufacturer and name of serial board or modem board to serial-pci-info@lists.sourceforge.net. register_serial(): autoconfig failed Real Time Clock Driver v1.10e Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 sis900.c: v1.08.06 9/24/2002 eth0: ICS LAN PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xb000, IRQ 22, 00:e0:18:93:b9:b3. HDLC support module revision 1.11 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 961 MuTIOL IDE UDMA100 controller ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SV0602H, ATA DISK drive hdb: ST360015A, ATA DISK drive blk: queue c03a5a20, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03a5b68, I/O limit 4095Mb (mask 0xffffffff) hdc: LITEON DVD-ROM LTD163, ATAPI CD/DVD-ROM drive hdd: CR-48XATE, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area =3D> 1 hda: 117304992 sectors (60060 MB) w/2048KiB Cache, CHS=3D7758/240/63, UDMA(= 100) hdb: attached ide-disk driver. hdb: host protected area =3D> 1 hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=3D7753/240/63, UDMA(= 100) Partition check: hda: hda1 hda2 hdb: hdb1 hdb2 hdb3 hdb4 SCSI subsystem driver Revision: 1.00 I2O Core - (C) Copyright 1999 Red Hat Software I2O: Event thread created as pid 8 I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 32768) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. cramfs: wrong magic FAT: bogus logical sector size 5632 reiserfs: found format "3.6" with standard journal reiserfs: checking transaction log (device ide0(3,65)) ... for (ide0(3,65)) ide0(3,65):Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 112k freed Adding Swap: 1999864k swap-space (priority -1) parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EC= P,DMA] ppdev: user-space parallel port driver Intel 810 + AC97 Audio, version 0.24, 14:35:05 Aug 29 2003 i810: SiS 7012 found at IO 0xb400 and 0xb800, MEM 0x0000 and 0x0000, IRQ 21 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 ac97_codec: AC97 Audio codec, id: ADS96 (Analog Devices AD1885) i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not presen= t), total channels =3D 2 apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) apm: overridden by ACPI. IA-32 Microcode Update Driver: v1.11 Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected SiS 651 chipset agpgart: AGP aperture is 64M @ 0xf0000000 usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xe0a22000, IRQ 20 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controlle= r usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xe0a24000, IRQ 23 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controlle= r (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. hdc: attached ide-scsi driver. hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITEON Model: DVD-ROM LTD163 Rev: GKS3 Type: CD-ROM ANSI SCSI revision: 02 Vendor: MITSUMI Model: CR-48XATE Rev: 5.0F Type: CD-ROM ANSI SCSI revision: 02 nvidia: loading NVIDIA NVdriver Kernel Module 1.0-2880 Tue Mar 26 08:12:3= 8 PST 2002 reiserfs: found format "3.6" with standard journal hub.c: new USB device 00:02.2-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x3f0/0x1904) is not claimed by any active d= river. reiserfs: checking transaction log (device ide0(3,66)) ... for (ide0(3,66)) ide0(3,66):Using r5 hash to sort names eth0: Media Link Off ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (4095 buckets, 32760 max) - 292 bytes per conntrac= k usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice lp0: using parport0 (interrupt-driven). apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) apm: overridden by ACPI. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0= x03F0 pid 0x1904 printer.c: v0.11: USB Printer Device Class driver NVRM: AGPGART: SiS chipset NVRM: AGPGART: aperture: 64M @ 0xf0000000 NVRM: AGPGART: aperture mapped from 0xf0000000 to 0xe1c49000 NVRM: AGPGART: mode 4x NVRM: AGPGART: allocated 16 pages --=-8DOrqN19Q4no2KV1dKOa--