From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?S=E9rgio?= "M. Basto" Subject: An unexpected IO-APIC was found. Date: Tue, 01 Jun 2004 18:53:09 +0100 Sender: linux-smp-owner@vger.kernel.org Message-ID: <1086112389.9808.52.camel@rh10.fe.up.pt> Reply-To: sergiomb@netcabo.pt Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-KvcnsnE/b19ownTXtMr8" Return-path: List-Id: To: linux-smp@vger.kernel.org --=-KvcnsnE/b19ownTXtMr8 Content-Type: text/plain Content-Transfer-Encoding: 7bit An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org well is just 1 pentium 4 xeon with HT, on one mother board asus http://www.asus.com.tw/support/download/item.aspx?ModelName=P4S800-MX&Type=All&SLanguage=en-us but since is asked. The computer works fine, I upgrade for the latest bios but have no effects, ACPI works fine. root@rh10:~#cat /proc/interrupts CPU0 0: 3139566 local-APIC-edge timer 1: 33012 IO-APIC-edge keyboard 8: 1 IO-APIC-edge rtc 12: 789425 IO-APIC-edge PS/2 Mouse 14: 174518 IO-APIC-edge ide0 15: 482394 IO-APIC-edge ide1 18: 90 IO-APIC-level SiS SI7012 19: 735141 IO-APIC-level eth0 20: 0 none acpi, usb-ohci 21: 0 IO-APIC-level usb-ohci 23: 0 IO-APIC-level ehci_hcd NMI: 0 LOC: 3139527 ERR: 0 MIS: 0 root@rh10:~#cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 5 cpu MHz : 2800.834 cache size : 512 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips : 5583.66 thanks, Sergio M. B. --=-KvcnsnE/b19ownTXtMr8 Content-Disposition: attachment; filename=dmesg Content-Type: text/plain; name=dmesg; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit Linux version 2.4.27-pre4 (root@rh10.fe.up.pt) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-6)) #2 Mon May 31 19:34:56 WEST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003dffc000 (usable) BIOS-e820: 000000003dffc000 - 000000003dfff000 (ACPI data) BIOS-e820: 000000003dfff000 - 000000003e000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 95MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 253948 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 24572 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f5700 ACPI: RSDT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc000 ACPI: FADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc0c0 ACPI: BOOT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc030 ACPI: MADT (v001 ASUS P4S800MX 0x42302e31 MSFT 0x31313031) @ 0x3dffc058 ACPI: DSDT (v001 ASUS P4S800MX 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 128, address 0xfec00000, IRQ 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 20 low level) Using ACPI (MADT) for SMP configuration information Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 2800.834 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5583.66 BogoMIPS Memory: 1000632k/1015792k available (1531k kernel code, 14772k reserved, 592k data, 156k init, 98288k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=0 pin2=-1 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... failed. ...trying to set up timer as Virtual Wire IRQ... works. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2800.8321 MHz. ..... host bus clock speed is 200.0592 MHz. cpu: 0, clocks: 2000592, slice: 1000296 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1 PCI: Using configuration type 1 tbxface-0117 [03] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:............................................................................................................................... Table [DSDT](id F004) - 318 Objects with 46 Devices 127 Methods 6 Regions ACPI Namespace successfully loaded at root c035605c evxfevnt-0093 [04] acpi_enable : Transition to ACPI mode successful evgpeblk-0867 [06] ev_create_gpe_block : GPE 00 to 15 [_GPE] 2 regs at 000000000000E420 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 7 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-0867 [06] ev_create_gpe_block : GPE 16 to 31 [_GPE] 2 regs at 000000000000E430 on int 9 evgpeblk-0925 [06] ev_create_gpe_block : Found 0 Wake, Enabled 0 Runtime GPEs in this block Completing Region/Field/Buffer/Package initialization:....................................... Initialized 6/6 Regions 0/0 Fields 22/22 Buffers 11/11 Packages (327 nodes) Executing all Device _STA and_INI methods:................................................. 49 Devices found containing: 49 _STA, 1 _INI methods ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware 00:00:02[A] -> 2-16 -> IRQ 16 level low 00:00:02[B] -> 2-17 -> IRQ 17 level low 00:00:02[C] -> 2-18 -> IRQ 18 level low 00:00:02[D] -> 2-19 -> IRQ 19 level low 00:00:03[B] -> 2-21 -> IRQ 21 level low 00:00:03[C] -> 2-22 -> IRQ 22 level low 00:00:03[D] -> 2-23 -> IRQ 23 level low number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178080 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0080 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... register #02: 02000000 ....... : arbitration: 02 .... register #03: 00000001 ....... : Boot DT : 1 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 1 0 0 0 0 1 1 41 03 001 01 0 0 0 0 0 1 1 49 04 001 01 0 0 0 0 0 1 1 51 05 001 01 0 0 0 0 0 1 1 59 06 001 01 0 0 0 0 0 1 1 61 07 001 01 0 0 0 0 0 1 1 69 08 001 01 0 0 0 0 0 1 1 71 09 001 01 0 0 0 0 0 1 1 79 0a 001 01 0 0 0 0 0 1 1 81 0b 001 01 0 0 0 0 0 1 1 89 0c 001 01 0 0 0 0 0 1 1 91 0d 001 01 0 0 0 0 0 1 1 99 0e 001 01 0 0 0 0 0 1 1 A1 0f 001 01 0 0 0 0 0 1 1 A9 10 001 01 1 1 0 1 0 1 1 B1 11 001 01 1 1 0 1 0 1 1 B9 12 001 01 1 1 0 1 0 1 1 C1 13 001 01 1 1 0 1 0 1 1 C9 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 D1 16 001 01 1 1 0 1 0 1 1 D9 17 001 01 1 1 0 1 0 1 1 E1 IRQ to pin mappings: IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. PCI: Using ACPI for IRQ routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket cpufreq: P4/Xeon(TM) CPU On-Demand Clock Modulation available Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 ACPI: Power Button (FF) [PWRF] acpi_processor-2174 [22] acpi_processor_get_inf: Invalid PBLK length [5] ACPI: Processor [CPU0] (supports C1) ACPI: Processor [CPU1] (supports C1) pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10f NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio hda: ST380011A, ATA DISK drive blk: queue c037fa80, I/O limit 4095Mb (mask 0xffffffff) hdc: SAMSUNG DVD-ROM SD-616E, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > ide: late registration of driver. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 159k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 156k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf8855000, IRQ 20 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xf8857000, IRQ 21 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 00:03.3: irq 23, pci mem f8860000 usb.c: new USB bus registered, assigned bus number 3 PCI: cache line size of 128 is not supported by device 00:03.3 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Adding Swap: 1831368k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. --=-KvcnsnE/b19ownTXtMr8--