From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Lee Subject: WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org Date: Wed, 16 Jan 2002 14:23:11 -0700 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200201161423.11608.tlee5794@rushmore.com> Reply-To: tlee5794@rushmore.com Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="Boundary-00=_/8eR8aCxuD7A+dJ" Return-path: List-Id: To: linux-smp@vger.kernel.org --Boundary-00=_/8eR8aCxuD7A+dJ Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, This message is displayed as I am booting linux 2.4.19 on an SiS 648 motherboard: IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178014 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0014 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org This is a single processor system that I just put together and if I turn on APIC Mode in the Award BIOS then no PCI devices and the on motherboard network controller do not work. The motherboard is a AOpen AX45-8XN with onboard sound and networking. The CPU is an Intel 2.4GHZ Pentium 4. If I turn off the APIC Mode in the BIOS I can boot and get all devices to work and of course the above message goes away but I don't now what other performance or problems it causes to have the APIC mode turned off? I have attached two boot logs, the first with APIC Mode on and the second without it on. Is there anything I can do to get APIC mode turned on and devices working? Thanks, Tim Lee --Boundary-00=_/8eR8aCxuD7A+dJ Content-Type: text/plain; charset="us-ascii"; name="out.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="out.txt" Linux version 2.4.19-16mdk (quintela@bi.mandrakesoft.com) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #1 Fri Sep 20 18:15:05 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. Advanced speculative caching feature not present On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Kernel command line: BOOT_IMAGE=linux ro root=302 devfs=mount hdc=ide-scsi quiet ide_setup: hdc=ide-scsi No local APIC present or hardware disabled Initializing CPU#0 Detected 1785.547 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3565.15 BogoMIPS Memory: 515884k/524224k available (1176k kernel code, 7952k reserved, 444k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 3febf9ff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febf9ff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febf9ff 00000000 00000000 00000000 CPU: Common caps: 3febf9ff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router SIS [1039/0008] at 00:02.0 PCI: Found IRQ 5 for device 00:02.5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 32768k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:0a15 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 30412 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 15 PCI: Found IRQ 5 for device 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SiS5513 ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L060J3, ATA DISK drive hdb: Maxtor 91021U2, ATA DISK drive hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63 hdb: 20010816 sectors (10246 MB) w/512KiB Cache, CHS=1245/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 > /dev/ide/host0/bus0/target1/lun0: p1 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 245k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev SCSI subsystem driver Revision: 1.00 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal Adding Swap: 530104k swap-space (priority -1) scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. PCI: Found IRQ 11 for device 00:0b.0 PCI: Sharing IRQ 11 with 00:02.7 PCI: Sharing IRQ 11 with 00:0c.0 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe000. Vers LK1.1.16 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). Cisco Systems VPN Client Version 3.6.1 (Rel) kernel module loaded Splash status on console 0 changed to off inserting floppy driver for 2.4.19-16mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 2, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 NET4: Linux IPX 0.47 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc. NET4: AppleTalk 0.18a for Linux NET4.0 8139too Fast Ethernet driver 0.9.25 PCI: Found IRQ 11 for device 00:0c.0 PCI: Sharing IRQ 11 with 00:02.7 PCI: Sharing IRQ 11 with 00:0b.0 eth1: RealTek RTL8139 Fast Ethernet at 0xe28b6000, 00:01:80:25:f9:ec, IRQ 11 eth1: Identified 8139 chip type 'RTL-8139C' eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). Intel 810 + AC97 Audio, version 0.21, 18:45:57 Sep 20 2002 PCI: Found IRQ 11 for device 00:02.7 PCI: Sharing IRQ 11 with 00:0b.0 PCI: Sharing IRQ 11 with 00:0c.0 i810: SiS 7012 found at IO 0xdc00 and 0xd800, IRQ 11 i810_audio: Audio Controller supports 6 channels. ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (ALC650) i810_audio: AC'97 codec 0, new EID value = 0x05c7 i810_audio: AC'97 codec 0, DAC map configured, total channels = 6 nfs_statfs: statfs error = 512 --Boundary-00=_/8eR8aCxuD7A+dJ Content-Type: text/plain; charset="us-ascii"; name="outbad.txt" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="outbad.txt" BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f55a0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. Advanced speculative caching feature not present On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f6fd0 RSD PTR v0 [AWARD ] __va_range(0x1fff3000, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [AWARD AWRDACPI 16944.11825] __va_range(0x1fff3040, 0x24): idx=8 mapped at ffff6000 __va_range(0x1fff3040, 0x74): idx=8 mapped at ffff6000 ACPI table found: FACP v1 [AWARD AWRDACPI 16944.11825] __va_range(0x1fff70c0, 0x24): idx=8 mapped at ffff6000 __va_range(0x1fff70c0, 0x54): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [AWARD AWRDACPI 16944.11825] __va_range(0x1fff70c0, 0x54): idx=8 mapped at ffff6000 LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16 IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0]) 1 CPUs total Local APIC address fee00000 Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: BOOT_IMAGE=linux ro root=302 quiet devfs=mount hdc=ide-scsi hdd=ide-scsi ide_setup: hdc=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1785.577 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 3565.15 BogoMIPS Memory: 515892k/524224k available (1176k kernel code, 7944k reserved, 444k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 04 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-19 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 23. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178014 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0014 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 001 01 0 0 0 0 0 1 1 69 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 99 12 001 01 1 1 0 1 0 1 1 A1 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 1 0 1 1 A9 15 001 01 1 1 0 1 0 1 1 B1 16 001 01 1 1 0 1 0 1 1 B9 17 001 01 1 1 0 1 0 1 1 C1 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1785.5977 MHz. ..... host bus clock speed is 99.1996 MHz. cpu: 0, clocks: 991996, slice: 495998 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb100, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router SIS [1039/0008] at 00:02.0 PCI->APIC IRQ transform: (B0,I2,P1) -> 17 PCI->APIC IRQ transform: (B0,I2,P0) -> 17 PCI->APIC IRQ transform: (B0,I2,P2) -> 18 PCI->APIC IRQ transform: (B0,I3,P0) -> 20 PCI->APIC IRQ transform: (B0,I3,P1) -> 21 PCI->APIC IRQ transform: (B0,I3,P2) -> 22 PCI->APIC IRQ transform: (B0,I3,P3) -> 23 PCI->APIC IRQ transform: (B0,I11,P0) -> 18 PCI->APIC IRQ transform: (B0,I12,P0) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 vesafb: framebuffer at 0xe0000000, mapped to 0xe0800000, size 32768k vesafb: mode is 800x600x16, linelength=1600, pages=3 vesafb: protected mode interface info at c000:0a15 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (800x600, 30412 bytes). Console: switching to colour frame buffer device 80x16 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller on PCI bus 00 dev 15 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SiS5513 ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:pio hda: MAXTOR 6L060J3, ATA DISK drive hdb: Maxtor 91021U2, ATA DISK drive hdc: PLEXTOR CD-R PX-W1210A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 117266688 sectors (60041 MB) w/1819KiB Cache, CHS=7299/255/63 hdb: 20010816 sectors (10246 MB) w/512KiB Cache, CHS=1245/255/63 Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 > /dev/ide/host0/bus0/target1/lun0: p1 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 245k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev SCSI subsystem driver Revision: 1.00 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 18:49:04 Sep 20 2002 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal Adding Swap: 530104k swap-space (priority -1) scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PLEXTOR Model: CD-R PX-W1210A Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 00:0b.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xe000. Vers LK1.1.16 8139too Fast Ethernet driver 0.9.25 eth1: RealTek RTL8139 Fast Ethernet at 0xe29b5000, 00:01:80:25:f9:ec, IRQ 18 eth1: Identified 8139 chip type 'RTL-8139C' eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Intel 810 + AC97 Audio, version 0.21, 18:45:57 Sep 20 2002 i810: SiS 7012 found at IO 0xdc00 and 0xd800, IRQ 18 i810_audio: Audio Controller supports 6 channels. ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (ALC650) i810_audio: AC'97 codec 0, new EID value = 0x05c7 i810_audio: AC'97 codec 0, DAC map configured, total channels = 6 NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. parport0: PC-style at 0x378 [PCSPP,TRISTATE] lp0: using parport0 (polling). NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. Cisco Systems VPN Client Version 3.6.1 (Rel) kernel module loaded Splash status on console 0 changed to off NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. NETDEV WATCHDOG: eth1: transmit timed out eth1: Tx queue start entry 4 dirty entry 0. eth1: Tx descriptor 0 is 00002000. (queue head) eth1: Tx descriptor 1 is 00002000. eth1: Tx descriptor 2 is 00002000. eth1: Tx descriptor 3 is 00002000. eth1: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1. keyboard: unknown scancode e0 01 --Boundary-00=_/8eR8aCxuD7A+dJ--