From: "Jürgen Braun" <jnbraun@web.de>
To: linux-smp@vger.kernel.org
Subject: APIC error
Date: Thu, 1 Aug 2002 22:14:22 +0200 [thread overview]
Message-ID: <200208012014.g71KELX20927@mailgate5.cinetic.de> (raw)
Hi
I've a problem with APIC on my Gigabyte 586DX SMP-System with two P166MMX and Kernel 2.4.18 and 2.4.19-rc3-ac3. When both CPU's are under load (e.g. compiling the Kernel) I get this message in syslog about every 5 - 10 sec:
APIC error on CPUX: YY(ZZ)
X is 0 or 1
YY is 02 or 08 (sometimes 04 or 0a)
ZZ is always 00
After I searched the archive of this list I found the following hints:
"not overclocking"
Well, the CPU's only run with 150MHz to make sure there are no problems with temperature. Or sould I put it in a refrigerator? ;)
Use Bootparameter "noapic" and/or "nmi_watchdog=0"
I tried it with "noapic" with "nmi_watchdog=0" and with both.
Well, this sounds a little bit strange to me, because even if I say "noapic" the error occurred.
I found a hint there could be a problem with the onboard AIC-7880 SCSI.
The error occur with an installation on a SCSI-Disk with IDE disabled and an installation on an IDE-Disk with SCSI disabled.
Nothing helps.
Please give me a hint how to fix this problem. Thanks
Juergen
P.S. I'm not a member of this list.
______________________________________________________________________________
FreeMail in der Premiumversion! Mit mehr Speicher, mehr Leistung, mehr
Erlebnis und mehr Praemie. Jetzt unter http://club.web.de/?mc=021105
next reply other threads:[~2002-08-01 20:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-01 20:14 Jürgen Braun [this message]
-- strict thread matches above, loose matches on Subject: below --
2003-04-08 18:25 APIC error William E. Butler
2004-03-24 23:26 Ed Westphal
2005-02-15 5:04 Bryan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200208012014.g71KELX20927@mailgate5.cinetic.de \
--to=jnbraun@web.de \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox