From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Wigzell Subject: No IRQ assigned to my PCI nic, on an ASUS A7M266D w two AMD 2000s Date: Sat, 17 Aug 2002 00:54:15 +0000 (UTC) Sender: linux-smp-owner@vger.kernel.org Message-ID: <20020817180138.E19507@home.com> Mime-Version: 1.0 Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-smp@vger.kernel.org Hi, I'm having trouble getting the APIC to assign an IRQ to my NIC. BIOS is AWARD 1006. Is there a fix for this? Mark + cat /proc/pci PCI devices found: Bus 0, device 0, function 0: Host bridge: PCI device 1022:700c (Advanced Micro Devices [AMD]) (rev 17). Master Capable. Latency=32. Prefetchable 32 bit memory at 0xf8000000 [0xfbffffff]. Prefetchable 32 bit memory at 0xf7800000 [0xf7800fff]. I/O at 0xe800 [0xe803]. Bus 0, device 1, function 0: PCI bridge: PCI device 1022:700d (Advanced Micro Devices [AMD]) (rev 0). Master Capable. No bursts. Min Gnt=8. Bus 0, device 7, function 0: ISA bridge: PCI device 1022:7440 (Advanced Micro Devices [AMD]) (rev 5). Bus 0, device 7, function 1: IDE interface: PCI device 1022:7441 (Advanced Micro Devices [AMD]) (rev 4). Master Capable. Latency=32. I/O at 0xd800 [0xd80f]. Bus 0, device 7, function 3: Bridge: PCI device 1022:7443 (Advanced Micro Devices [AMD]) (rev 3). Master Capable. Latency=32. Bus 0, device 16, function 0: PCI bridge: PCI device 1022:7448 (Advanced Micro Devices [AMD]) (rev 5). Master Capable. Latency=32. Min Gnt=4. Bus 1, device 5, function 0: VGA compatible controller: PCI device 10de:0253 (nVidia Corporation) (rev 162). IRQ 16. Master Capable. Latency=64. Min Gnt=5.Max Lat=1. Non-prefetchable 32 bit memory at 0xe6000000 [0xe6ffffff]. Prefetchable 32 bit memory at 0xe8000000 [0xefffffff]. Prefetchable 32 bit memory at 0xe7800000 [0xe787ffff]. Bus 2, device 0, function 0: USB Controller: PCI device 1022:7449 (Advanced Micro Devices [AMD]) (rev 7). IRQ 19. Master Capable. Latency=32. Max Lat=80. Non-prefetchable 32 bit memory at 0xe5800000 [0xe5800fff]. Bus 2, device 4, function 0: Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 16). Master Capable. Latency=32. Min Gnt=2.Max Lat=24. I/O at 0xc800 [0xc8ff]. Bus 2, device 5, function 0: USB Controller: NEC Corporation USB (rev 65). IRQ 18. Master Capable. Latency=32. Min Gnt=1.Max Lat=42. Non-prefetchable 32 bit memory at 0xe5000000 [0xe5000fff]. Bus 2, device 5, function 1: USB Controller: NEC Corporation USB (#2) (rev 65). IRQ 19. Master Capable. Latency=32. Min Gnt=1.Max Lat=42. Non-prefetchable 32 bit memory at 0xe4800000 [0xe4800fff]. Bus 2, device 5, function 2: USB Controller: PCI device 1033:00e0 (NEC Corporation) (rev 2). IRQ 16. Master Capable. Latency=32. Min Gnt=16.Max Lat=34. Non-prefetchable 32 bit memory at 0xe4000000 [0xe40000ff]. Bus 2, device 8, function 0: Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 120). Master Capable. Latency=32. Min Gnt=10.Max Lat=10. I/O at 0xc400 [0xc47f]. Non-prefetchable 32 bit memory at 0xe3800000 [0xe380007f]. + cat /proc/interrupts CPU0 CPU1 0: 16847 16976 IO-APIC-edge timer 1: 384 179 IO-APIC-edge keyboard 2: 0 0 XT-PIC cascade 8: 1 0 IO-APIC-edge rtc 14: 1673 3235 IO-APIC-edge ide0 15: 2 2 IO-APIC-edge ide1 18: 0 0 IO-APIC-level usb-ohci 19: 0 0 IO-APIC-level usb-ohci, usb-ohci NMI: 0 0 LOC: 33746 33745 ERR: 0 MIS: 0 + dmesg Linux version 2.4.7-10smp (bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1 SMP Thu Sep 6 16:16:16 EDT 2001 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffec000 (usable) BIOS-e820: 000000003ffec000 - 000000003ffef000 (ACPI data) BIOS-e820: 000000003ffef000 - 000000003ffff000 (reserved) BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 127MB HIGHMEM available. found SMP MP-table at 000f7d40 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. On node 0 totalpages: 262124 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32748 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: ASUS Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 16 Processor #1 Pentium(tm) Pro APIC version 16 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 2 Kernel command line: ro root=/dev/hdb3 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1666.767 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3322.67 BogoMIPS Memory: 1026824k/1048496k available (1389k kernel code, 20264k reserved, 108k data, 240k init, 130992k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 Intel machine check reporting enabled on CPU#0. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU0: AMD Athlon(TM) MP 2000+ stepping 02 per-CPU timeslice cutoff: 731.44 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3329.22 BogoMIPS CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 Intel machine check reporting enabled on CPU#1. CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: After generic, caps: 0383fbff c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbff c1cbfbff 00000000 00000000 CPU1: AMD Athlon(TM) MP 2000+ stepping 02 Total of 2 processors activated (6651.90 BogoMIPS). ENABLING IO-APIC IRQs ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-3, 2-5, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 17. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : IO APIC version: 0011 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 000 00 1 0 0 0 0 0 0 00 04 003 03 0 0 0 0 0 1 1 41 05 000 00 1 0 0 0 0 0 0 00 06 003 03 0 0 0 0 0 1 1 49 07 003 03 0 0 0 0 0 1 1 51 08 003 03 0 0 0 0 0 1 1 59 09 003 03 0 0 0 0 0 1 1 61 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 003 03 0 0 0 0 0 1 1 69 0d 003 03 0 0 0 0 0 1 1 71 0e 003 03 0 0 0 0 0 1 1 79 0f 003 03 0 0 0 0 0 1 1 81 10 003 03 1 1 0 1 0 1 1 89 11 000 00 1 0 0 0 0 0 0 00 12 003 03 1 1 0 1 0 1 1 91 13 003 03 1 1 0 1 0 1 1 99 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1666.6465 MHz. ..... host bus clock speed is 266.6632 MHz. cpu: 0, clocks: 2666632, slice: 888877 CPU0 cpu: 1, clocks: 2666632, slice: 888877 CPU1 checking TSC synchronization across CPUs: passed. mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xf1dd0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router default [1022/7443] at 00:07.3 PCI->APIC IRQ transform: (B1,I5,P0) -> 16 PCI->APIC IRQ transform: (B2,I0,P3) -> 19 PCI->APIC IRQ transform: (B2,I5,P0) -> 18 PCI->APIC IRQ transform: (B2,I5,P1) -> 19 PCI->APIC IRQ transform: (B2,I5,P2) -> 16 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Simple Boot Flag extension found and enabled. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) apm: disabled - APM is not SMP safe. Starting kswapd v1.8 allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10d block: queued sectors max/low 681549kB/550477kB, 2048 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device 39, VID=1022, DID=7441 PCI_IDE: chipset revision 4 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio hda: ST380021A, ATA DISK drive hdb: ST380021A, ATA DISK drive hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33) hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(33) ide-floppy driver 0.97 Partition check: hda: hda1 hdb: hdb1 hdb2 hdb3 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 ide-floppy driver 0.97 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 324k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 240k freed Adding Swap: 2040244k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf892e000, IRQ 19 usb-ohci.c: usb-02:00.0, PCI device 1022:7449 (Advanced Micro Devices [AMD]) usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 4 ports detected usb-ohci.c: USB OHCI at membase 0xf8930000, IRQ 18 usb-ohci.c: usb-02:05.0, NEC Corporation USB usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xf8932000, IRQ 19 usb-ohci.c: usb-02:05.1, NEC Corporation USB (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: v5.2:USB OHCI Host Controller Driver EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,67), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. SCSI subsystem driver Revision: 1.00 Disallowing DMA for hdc scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.01 Type: CD-ROM ANSI SCSI revision: 02 >>>>> This is where I ran "insmod 3c59x": PCI: Enabling device 02:08.0 (0014 -> 0017) PCI: No IRQ known for interrupt pin A of device 02:08.0. Probably buggy MP table. 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html 02:08.0: 3Com PCI 3c905C Tornado at 0xc400. Vers LK1.1.16 *** Warning: IRQ 0 is unlikely to work! ***