From mboxrd@z Thu Jan 1 00:00:00 1970 From: root@mail.hentschelit.de (root) Subject: (unknown) Date: Fri, 3 Jan 2003 19:03:26 +0100 (CET) Sender: linux-smp-owner@vger.kernel.org Message-ID: <20030103180326.2B57313AC48@mail.hentschelit.de> Return-path: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-smp@vger.kernel.org Linux version 2.4.19-16mdkcustom (root@lotus.hentschelit.de) (gcc version 3.2 (Mandrake Linux 9.0 3.2-1mdk)) #6 Fre Nov 1 13:50:41 CET 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000fb690 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. Advanced speculative caching feature present On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: GIGABYTE Product ID: 7VRXP APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 2 at 0xFEC00000. Processors: 1 Kernel command line: BOOT_IMAGE=linux-custom ro root=2101 devfs=mount Initializing CPU#0 Detected 1600.103 MHz processor. Console: colour VGA+ 80x50 Calibrating delay loop... 3191.60 BogoMIPS Memory: 256240k/262080k available (1352k kernel code, 5452k reserved, 331k data, 280k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2 Advanced speculative caching feature present Disabling advanced speculative caching CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000 CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000 CPU: AMD Athlon(tm) XP 1900+ stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-9, 2-10, 2-20, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 26. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 001 01 0 0 0 0 0 1 1 71 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 001 01 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B9 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1600.2115 MHz. ..... host bus clock speed is 266.7017 MHz. cpu: 0, clocks: 2667017, slice: 1333508 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router default [1106/3147] at 00:11.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 17 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I10,P0) -> 18 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B0,I15,P0) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B0,I20,P0) -> 16 PCI->APIC IRQ transform: (B0,I20,P1) -> 17 PCI->APIC IRQ transform: (B0,I20,P2) -> 16 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:11.2, from 9 to 5 PCI: Via IRQ fixup for 00:11.3, from 9 to 5 PCI: Via IRQ fixup for 00:14.0, from 9 to 0 PCI: Via IRQ fixup for 00:14.1, from 9 to 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.5.0 initialized devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:.......................................................................................................................................................... 154 Control Methods found and parsed (516 nodes total) ACPI Namespace successfully loaded at root c03010c0 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [-29] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:............................................ 44 Devices found: 44 _STA, 1 _INI Completing Region and Field initialization:................................. 24/29 Regions, 9/9 Fields initialized (516 nodes total) ACPI: Subsystem enabled pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20276: IDE controller on PCI bus 00 dev 78 PDC20276: chipset revision 1 PDC20276: not 100% native mode: will probe irqs later PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide0: BM-DMA at 0xdc00-0xdc07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdc:pio, hdd:pio VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide2: BM-DMA at 0xfc00-0xfc07, BIOS settings: hde:DMA, hdf:DMA ide3: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdg:pio, hdh:DMA hda: MAXTOR 4K080H4, ATA DISK drive hdc: IBM-DTLA-307030, ATA DISK drive hde: WDC WD800BB-00CAA1, ATA DISK drive hdf: WDC WD400EB-00CPF0, ATA DISK drive hdh: TOSHIBA DVD-ROM SD-M1502, ATAPI CD/DVD-ROM drive ide0 at 0xec00-0xec07,0xe802 on irq 19 ide1 at 0xe400-0xe407,0xe002 on irq 19 ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 ide3 at 0x170-0x177,0x376 on irq 15 hda: 156301488 sectors (80026 MB) w/2000KiB Cache, CHS=155061/16/63, UDMA(100) hdc: 60036480 sectors (30739 MB) w/1916KiB Cache, CHS=59560/16/63, UDMA(100) hde: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100) hdf: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 /dev/ide/host0/bus1/target0/lun0:<6> [PTBL] [3737/255/63] p1 /dev/ide/host2/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 > /dev/ide/host2/bus0/target1/lun0: p1 RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) Linux IP multicast router 0.06 plus PIM-SM ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team arp_tables: (C) 2002 David S. Miller NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 92k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 280k freed Real Time Clock Driver v1.10e EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,1), internal journal Adding Swap: 1044184k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide1(22,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide2(33,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:8F:EA:93, IRQ 17. Board assembly 721383-009, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth1: RealTek RTL-8029 found at 0xcc00, IRQ 16, 00:50:BF:11:46:7C.