From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Louis Bach Subject: unexpected IOAPIC Date: Thu, 9 Jan 2003 21:44:10 +0100 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200301092144.10327@Torrent> Reply-To: jlbach@ifrance.com Mime-Version: 1.0 Content-Type: Multipart/Mixed; boundary="------------Boundary-00=_M9SGBL5MUVKC3NS80300" Return-path: List-Id: To: linux-smp@vger.kernel.org --------------Boundary-00=_M9SGBL5MUVKC3NS80300 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable Booting makes HDD noisy (clac-clac-clac) Then maping problem Var/Log/boot;msg says to send it to you Jean-Louis Bach jlbach@ifrance.com=20 --------------Boundary-00=_M9SGBL5MUVKC3NS80300 Content-Type: text/plain; charset="us-ascii"; name="boot.msg" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="boot.msg" Linux version 2.4.18-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Wed Mar 27 13:58:12 UTC 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000002fff0000 (usable) BIOS-e820: 000000002fff0000 - 000000002fff8000 (ACPI data) BIOS-e820: 000000002fff8000 - 0000000030000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) Scanning bios EBDA for MXT signature found SMP MP-table at 000fb920 hm, page 000fb000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. On node 0 totalpages: 196592 zone(0): 4096 pages. zone(1): 192496 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: VIA Product ID: VT5440B APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 2 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Building zonelist for node : 0 Kernel command line: auto BOOT_IMAGE=linux ro root=305 hdc=ide-scsi ide_setup: hdc=ide-scsi Initializing CPU#0 Detected 1300.085 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 2595.22 BogoMIPS Memory: 770344k/786368k available (1504k kernel code, 15636k reserved, 429k data, 144k init, 0k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU0: AMD Duron(tm) Processor stepping 01 per-CPU timeslice cutoff: 182.78 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000080 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-18, 2-20, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178002 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0002 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 001 01 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 71 0d 001 01 0 0 0 0 0 1 1 79 0e 001 01 0 0 0 0 0 1 1 81 0f 001 01 0 0 0 0 0 1 1 89 10 001 01 1 1 0 1 0 1 1 91 11 001 01 1 1 0 1 0 1 1 99 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 A9 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ21 -> 0:21 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1300.0614 MHz. ..... host bus clock speed is 200.0094 MHz. cpu: 0, clocks: 2000094, slice: 1000047 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent PCI: Using IRQ router default [1106/3147] at 00:11.0 PCI->APIC IRQ transform: (B0,I5,P0) -> 16 PCI->APIC IRQ transform: (B0,I5,P0) -> 16 PCI->APIC IRQ transform: (B0,I6,P0) -> 17 PCI->APIC IRQ transform: (B0,I8,P0) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B0,I17,P3) -> 21 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) mxt_scan_bios: enter Starting kswapd kinoded started VFS: Diskquotas version dquot_6.5.0 initialized ACPI: APM is already active, exiting vesafb: framebuffer at 0xda000000, mapped to 0xf080d000, size 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0336 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Looking for splash picture.... found (1024x768, 42648 bytes). Console: switching to colour frame buffer device 105x34 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8233a (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD400BB-00DEA0, ATA DISK drive hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive hdc: LITE-ON LTR-32125W, ATAPI CD/DVD-ROM drive hdd: ST340016A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c037ccc4, I/O limit 4095Mb (mask 0xffffffff) hda: safely enabled flush hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) blk: queue c037d184, I/O limit 4095Mb (mask 0xffffffff) hdd: safely enabled flush hdd: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63, UDMA(100) hdb: no flushcache support hdb: ATAPI 16X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.99 Partition check: hda: hda1 hda2 hda3 hda4 < hda5 > hdd: [PTBL] [4865/255/63] hdd1 < hdd5 > hdd2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 16 devices) Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.99 SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Uncompressing............done. Freeing initrd memory: 587k freed VFS: Mounted root (ext2 filesystem). hdc: no flushcache support scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-32125W Rev: WBS2 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 240x/40x writer cd/rw xa/form2 cdda tray reiserfs: checking transaction log (device 03:05) ... Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 144k freed md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. LVM version 1.0.3(19/02/2002) module loaded Adding Swap: 1502068k swap-space (priority 42) Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 22:35:26 2003 Run file system check on root for LVM activation doneRemounting root file system (/) read/write for vgscan... Scanning for LVM volume groups... vgscan -- reading all physical volumes (this may take a while...) vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created vgscan -- WARNING: This program does not do a VGDA backup of your volume group Activating LVM volume groups... vgchange -- no volume groups found done Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.26 (3-Feb-2002) Reiserfs super block in block 16 on 0x305 of format 3.6 with standard journal Blocks (total/free): 7588696/2028724 by 4096 bytes Filesystem is cleanly umounted /dev/hda2: clean, 45/12048 files, 5721/48195 blocks doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw) /dev/hda2 on /boot type ext2 (rw) doneRestore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up the CMOS clock done Setting up timezone data done Setting up hostname 'linux' done Setting up loopback interface done Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneCreating /var/log/boot.msg doneEnabling syn flood protection done Disabling IP forwarding done killproc: kill(28,29) Running /etc/init.d/boot.local Boot logging started on /dev/tty1(/dev/console) at Thu Jan 9 21:35:32 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting Firewall Initialization (phase 1 of 3) donekillproc: kill(28,3) INIT: Entering runlevel: 5 /etc/init.d/rc5.d/S01SuSEfirewall2_init start done '/etc/init.d/rc5.d/S01SuSEfirewall2_init start' exits with status 0 /etc/init.d/rc5.d/S01isdn start '/etc/init.d/rc5.d/S01isdn start' exits with status 0 /etc/init.d/rc5.d/S01personal-firewall.initial start Starting personal-firewall (initial) [not active] unused '/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6 /etc/init.d/rc5.d/S01random start Initializing random number generator done '/etc/init.d/rc5.d/S01random start' exits with status 0 /etc/init.d/rc5.d/S05network start Setting up network interfaces: lo done eth0 done ppp0 skipped INFO: Dont worry about skipped interfaces; they will be set up dynamically by service pcmcia, hotplug or when dialing. Starting Firewall Initialization (phase 2 of 3) '/etc/init.d/rc5.d/S05network start' exits with status 0 /etc/init.d/rc5.d/S06SuSEfirewall2_setup start done Starting hotplugging services ['/etc/init.d/rc5.d/S06SuSEfirewall2_setup start' exits with status 0 /etc/init.d/rc5.d/S06hotplug start net pci usbinsmod: insmod: a module named sg already exists insmod: insmod: insmod char-major-21 failed insmod: insmod: a module named sg already exists insmod: insmod: insmod char-major-21 failed insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o insmod: insmod: /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o: No such file or directory insmod: insmod: insmod /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/dabusb.o failed insmod: insmod: insmod dabusb failed ^G ] done '/etc/init.d/rc5.d/S06hotplug start' exits with status 0 /etc/init.d/rc5.d/S07hwscan start Starting hardware scan on bootinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/scanner.o insmod: Symbol version prefix 'smp_' ^Ginsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/storage/usb-storage.o insmod: Symbol version prefix 'smp_' ^G'/etc/init.d/rc5.d/S07hwscan start' exits with status 0 /etc/init.d/rc5.d/S07portmap start Starting RPC portmap daemonstartproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ] done '/etc/init.d/rc5.d/S07portmap start' exits with status 0 /etc/init.d/rc5.d/S07splash_early start '/etc/init.d/rc5.d/S07splash_early start' exits with status 0 /etc/init.d/rc5.d/S07sshd start Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done '/etc/init.d/rc5.d/S07sshd start' exits with status 0 /etc/init.d/rc5.d/S08nfs start '/etc/init.d/rc5.d/S08nfs start' exits with status 0 /etc/init.d/rc5.d/S09alsasound start Starting sound driver: es1968 done Restoring the previous sound setting done '/etc/init.d/rc5.d/S09alsasound start' exits with status 0 /etc/init.d/rc5.d/S09amavis start Starting virus-scanning for sendmail (amavis) done '/etc/init.d/rc5.d/S09amavis start' exits with status 0 /etc/init.d/rc5.d/S09atd start Starting service at daemon done startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ] '/etc/init.d/rc5.d/S09atd start' exits with status 0 /etc/init.d/rc5.d/S09fbset start '/etc/init.d/rc5.d/S09fbset start' exits with status 0 /etc/init.d/rc5.d/S09lpd start Starting lpdinsmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/media/video/videodev.o insmod: Symbol version prefix 'smp_' insmod: Using /lib/modules/2.4.18-64GB-SMP/kernel/drivers/usb/ov511.o ^Gstartproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/lpd ] done '/etc/init.d/rc5.d/S09lpd start' exits with status 0 /etc/init.d/rc5.d/S09postfix start Starting mail service (Postfix) done '/etc/init.d/rc5.d/S09postfix start' exits with status 0 /etc/init.d/rc5.d/S09suse-blinux start Starting suse-blinux startproc: execve (/usr/lib/suse-blinux/sbl) [ /usr/lib/suse-blinux/sbl ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/lib/suse-blinux/sbl ] done '/etc/init.d/rc5.d/S09suse-blinux start' exits with status 0 /etc/init.d/rc5.d/S10kbd start suse-blinux version 1.4 copyright (c) 2000-2002 SuSE GmbH, Nuernberg Author: Marco Skambraks Braillex 2d-screen on /dev/ttyS0 Loading keymap azerty/fr-latin1.map.gz doneLoading compose table winkeys shiftctrl latin1.add done Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys done'/etc/init.d/rc5.d/S10kbd start' exits with status 0 Initializing SMTP port (sendmail)/etc/init.d/rc5.d/S10sendmail start startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] sendmail: invalid option -- O sendmail: fatal: usage: sendmail [options] sendmail: invalid option -- A sendmail: fatal: usage: sendmail [options] done startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] '/etc/init.d/rc5.d/S10sendmail start' exits with status 0 /etc/init.d/rc5.d/S10smbfs start '/etc/init.d/rc5.d/S10smbfs start' exits with status 0 /etc/init.d/rc5.d/S10soundmodem start '/etc/init.d/rc5.d/S10soundmodem start' exits with status 0 /etc/init.d/rc5.d/S10splash start '/etc/init.d/rc5.d/S10splash start' exits with status 0 /etc/init.d/rc5.d/S10xdm start Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ PWD=/ LC_MESSAGES= HOSTNAME=linux CONSOLE=/dev/console RC_LANG=fr_FR@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 MAXHOME=/usr/lib/maxwell LANG=fr_FR@euro LC_NUMERIC= SHLVL=2 COLUMNS=105 LC_CTYPE=fr_FR@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done '/etc/init.d/rc5.d/S10xdm start' exits with status 0 /etc/init.d/rc5.d/S11cron start Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ] ^G done Starting Name Service Cache Daemon'/etc/init.d/rc5.d/S11cron start' exits with status 0 /etc/init.d/rc5.d/S11nscd start startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done '/etc/init.d/rc5.d/S11nscd start' exits with status 0 /etc/init.d/rc5.d/S11smpppd start Starting SMPPPDstartproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/smpppd ] done '/etc/init.d/rc5.d/S11smpppd start' exits with status 0 /etc/init.d/rc5.d/S20inetd start Starting inetdstartproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/ HOSTNAME=linux CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=105 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/inetd ] done '/etc/init.d/rc5.d/S20inetd start' exits with status 0 Starting personal-firewall (final) [not active] unused /etc/init.d/rc5.d/S21personal-firewall.final start '/etc/init.d/rc5.d/S21personal-firewall.final start' exits with status 6 /etc/init.d/rc5.d/S22splash_late start '/etc/init.d/rc5.d/S22splash_late start' exits with status 0 /etc/init.d/rc5.d/S23SuSEfirewall2_final start Starting Firewall Initialization (phase 3 of 3) Warning: No nameservers in /etc/resolv.conf! done Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final '/etc/init.d/rc5.d/S23SuSEfirewall2_final start' exits with status 0 killproc: kill(264,3) --------------Boundary-00=_M9SGBL5MUVKC3NS80300--