From mboxrd@z Thu Jan 1 00:00:00 1970 From: Subject: WARNING: unexpected APIC id: 02 dmesg included Date: Thu, 6 Feb 2003 17:50:10 -0500 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200302062250.PVP26327@vmms4.verisignmail.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org Sir, Ma'am, Please let me know anything that will help here. Thanks The following is the dmesg file for the boot of the following machine configuration: Dual Pentium XEON 2.8 GHz 400MHz FSB 2 GB RAM 2.4.18-19.8.0smp (This is the so-called Hyper-Thread Safe Kernel) If this is not true please len me know. Motherboard is the P4DMS Intel 7501 chipset. IO APIC error 02 needs resolving... or it it is safe to ignore...??? Thank you.. Dave Griffith, LowNoiseFloor,LLC ---begin dmesg---- Linux version 2.4.18-19.8.0smp (bhcompile@stripples.devel.redhat.com) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #1 SMP Thu Dec 12 04:36:25 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fefd000 (usable) BIOS-e820: 000000007fefd000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f68b0 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524160 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294784 pages. ACPI: Searched entire block, no RSDP was found. ACPI: Searched entire block, no RSDP was found. ACPI: System description tables not found Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000 Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 Processor #6 Pentium 4(tm) XEON(tm) APIC version 20 Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 Processor #7 Pentium 4(tm) XEON(tm) APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80400. I/O APIC #5 Version 32 at 0xFEC82000. I/O APIC #8 Version 32 at 0xFEC82400. Processors: 4 Kernel command line: ro root=LABEL=/ Initializing CPU#0 Detected 2795.156 MHz processor. Speakup v-1.00 CVS: Tue Jun 11 14:22:53 EDT 2002 : initialized Console: colour VGA+ 80x25 Calibrating delay loop... 5556.67 BogoMIPS Memory: 2059516k/2096640k available (1451k kernel code, 32500k reserved, 1067k data, 200k init, 1179124k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 32768 (order: 6, 262144 bytes) ramfs: mounted with options: ramfs: max_pages=257967 max_file_pages=0 max_inodes=0 max_dentries=257967 Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 per-CPU timeslice cutoff: 1462.59 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5590.08 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5590.08 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5590.08 BogoMIPS CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 07 Total of 4 processors activated (22326.91 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-20, 2-23, 3-0, 3-1, 3-2, 3-3, 3-4, 3-5, 3-6, 3-7, 3-10, 3-11, 3-12, 3- 13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3- 23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4- 22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5- 10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5- 20, 5-21, 5-22, 5-23, 8-0, 8-1, 8-2, 8-3, 8-4, 8-5, 8-6, 8-7, 8-8, 8-9, 8-10, 8-11, 8-12, 8-13, 8-14, 8-15, 8-16, 8-17, 8- 18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 008 08 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 00F 0F 0 0 0 0 0 1 1 51 07 00F 0F 0 0 0 0 0 1 1 59 08 00F 0F 0 0 0 0 0 1 1 61 09 00F 0F 0 0 0 0 0 1 1 69 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 71 0d 00F 0F 0 0 0 0 0 1 1 79 0e 00F 0F 0 0 0 0 0 1 1 81 0f 00F 0F 0 0 0 0 0 1 1 89 10 00F 0F 1 1 0 1 0 1 1 91 11 000 00 1 0 0 0 0 0 0 00 12 00F 0F 1 1 0 1 0 1 1 99 13 00F 0F 1 1 0 1 0 1 1 A1 14 000 00 1 0 0 0 0 0 0 00 15 00F 0F 1 1 0 1 0 1 1 A9 16 00F 0F 1 1 0 1 0 1 1 B1 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 00F 0F 1 1 0 1 0 1 1 B9 09 00F 0F 1 1 0 1 0 1 1 C1 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 00F 0F 1 1 0 1 0 1 1 C9 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ32 -> 1:8 IRQ33 -> 1:9 IRQ54 -> 2:6 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2794.1753 MHz. ..... host bus clock speed is 99.1597 MHz. cpu: 0, clocks: 194944, slice: 38988 CPU0 cpu: 1, clocks: 194944, slice: 38988 cpu: 2, clocks: 194944, slice: 38988 cpu: 3, clocks: 194944, slice: 38988 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. migration_task 0 on cpu=0 migration_task 1 on cpu=1 migration_task 2 on cpu=2 migration_task 3 on cpu=3 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd8b5, last bus=7 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B2,I3,P0) -> 54 PCI->APIC IRQ transform: (B3,I2,P0) -> 32 PCI->APIC IRQ transform: (B3,I2,P1) -> 33 PCI->APIC IRQ transform: (B7,I4,P0) -> 21 PCI->APIC IRQ transform: (B7,I5,P0) -> 22 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found speakup: initialized device: /dev/synth, node (MAJOR 10, MINOR 25) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 64 pages and 64 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.5.0 initialized pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e oprofile: can't get RTC I/O Ports block: 1024 slots per queue, batch=256 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. PIIX4: chipset revision 2 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio hda: WDC WD2000JB-00DUA0, ATA DISK drive hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c042eb04, I/O limit 4095Mb (mask 0xffffffff) blk: queue c042eb04, I/O limit 4095Mb (mask 0xffffffff) hda: 390721968 sectors (200050 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(33) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hda4 < hda5 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. pci_hotplug: PCI Hot Plug PCI Core version: 0.4 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 257k freed VFS: Mounted root (ext2 filesystem). SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.8 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs blk: queue c45d9a18, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c45d9818, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0104 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c45d9418, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c45d9018, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0104 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d70c18, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d70818, I/O limit 4095Mb (mask 0xffffffff) Vendor: FUJITSU Model: MAP3147NC Rev: 0105 Type: Direct-Access ANSI SCSI revision: 03 blk: queue c2d70418, I/O limit 4095Mb (mask 0xffffffff) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 scsi0:A:1:0: Tagged Queuing enabled. Depth 253 scsi0:A:2:0: Tagged Queuing enabled. Depth 253 scsi0:A:3:0: Tagged Queuing enabled. Depth 253 scsi0:A:4:0: Tagged Queuing enabled. Depth 253 scsi0:A:5:0: Tagged Queuing enabled. Depth 253 blk: queue c2d70418, I/O limit 4095Mb (mask 0xffffffff) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0 Attached scsi disk sdd at scsi0, channel 0, id 3, lun 0 Attached scsi disk sde at scsi0, channel 0, id 4, lun 0 Attached scsi disk sdf at scsi0, channel 0, id 5, lun 0 (scsi0:A:0): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sda: 287132440 512-byte hdwr sectors (147012 MB) sda: sda1 (scsi0:A:1): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sdb: 287132440 512-byte hdwr sectors (147012 MB) sdb: sdb1 (scsi0:A:2): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sdc: 287132440 512-byte hdwr sectors (147012 MB) sdc: sdc1 (scsi0:A:3): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sdd: 287132440 512-byte hdwr sectors (147012 MB) sdd: sdd1 (scsi0:A:4): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sde: 287132440 512-byte hdwr sectors (147012 MB) sde: sde1 (scsi0:A:5): 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit) SCSI device sdf: 287132440 512-byte hdwr sectors (147012 MB) sdf: sdf1 Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 200k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 04:54:15 Dec 12 2002 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x2040, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,3), internal journal Adding Swap: 1020088k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.18, 14 May 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. blk: queue c042eb04, I/O limit 4095Mb (mask 0xffffffff) David Griffith LowNoiseFloor 703-794-1805 Voice 703-794-1072 Fax