From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Ruskin Subject: unexpected IO-APIC Date: Sat, 22 Feb 2003 00:50:48 +0000 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200302220050.48854.aoyu93@dsl.pipex.com> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-smp@vger.kernel.org T on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map =2E..changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-11, 2-18, 2-20, 2-23 not connected. =2E.TIMER: vector=3D0x31 pin1=3D2 pin2=3D0 number of MP IRQ sources: 26. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... =2E... register #00: 02000000 =2E...... : physical APIC id: 02 =2E... register #01: 00178003 =2E...... : max redirection entries: 0017 =2E...... : PRQ implemented: 1 =2E...... : IO APIC version: 0003 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org =2E... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: =20 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 81 0d 001 01 0 0 0 0 0 1 1 89 0e 001 01 0 0 0 0 0 1 1 91 0f 001 01 0 0 0 0 0 1 1 99 10 001 01 1 1 0 1 0 1 1 A1 11 001 01 1 1 0 1 0 1 1 A9 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 B1 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B9 16 001 01 1 1 0 1 0 1 1 C1 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ21 -> 0:21 IRQ22 -> 0:22 =2E................................... done. Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 1607.5468 MHz. =2E.... host bus clock speed is 267.9244 MHz. cpu: 0, clocks: 2679244, slice: 1339622 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20021212 ACPI: Disabled via command line (acpi=3Doff) PCI: PCI BIOS revision 2.10 entry at 0xf9df0, last bus=3D1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3189] at 00:00.0 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I13,P0) -> 17 PCI->APIC IRQ transform: (B0,I15,P0) -> 19 PCI->APIC IRQ transform: (B0,I16,P0) -> 21 PCI->APIC IRQ transform: (B0,I16,P1) -> 21 PCI->APIC IRQ transform: (B0,I16,P2) -> 21 PCI->APIC IRQ transform: (B0,I16,P3) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 10 PCI->APIC IRQ transform: (B0,I17,P2) -> 22 PCI->APIC IRQ transform: (B0,I20,P0) -> 16 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:10.0, from 10 to 5 PCI: Via IRQ fixup for 00:10.1, from 11 to 5 PCI: Via IRQ fixup for 00:10.2, from 10 to 5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 vesafb: framebuffer at 0xd8000000, mapped to 0xf0800000, size 131072k vesafb: mode is 1024x768x16, linelength=3D2048, pages=3D1 vesafb: protected mode interface info at c000:ea90 vesafb: scrolling: redraw vesafb: directcolor: size=3D0:5:6:5, shift=3D0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ=20 SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq =3D 4) is a 16550A ttyS01 at 0x02f8 (irq =3D 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with=20 idebus=3Dxx PDC20276: IDE controller on PCI bus 00 dev 78 PDC20276: chipset revision 1 PDC20276: not 100% native mode: will probe irqs later PDC20276: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER= =20 Mode. PDC20276: first interface base=3D0x9800, second interface base=3D0xa000 ide2: BM-DMA at 0xa800-0xa807, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xa808-0xa80f, BIOS settings: hdg:pio, hdh:pio VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with=20 idebus=3Dxx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 VP_IDE: default first interface base=3D0x01f0, second interface base=3D= 0x170 ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 6Y080L0, ATA DISK drive hdb: Maxtor 6Y080L0, ATA DISK drive hdc: Maxtor 4D080H4, ATA DISK drive hdd: Maxtor 4D080H4, ATA DISK drive hde: Maxtor 54098H8, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide2 at 0x9800-0x9807,0x9c02 on irq 19 blk: queue c0340424, I/O limit 4095Mb (mask 0xffffffff) hda: host protected area =3D> 1 hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=3D9964/255/63,=20 UDMA(133) blk: queue c0340560, I/O limit 4095Mb (mask 0xffffffff) hdb: host protected area =3D> 1 hdb: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=3D9964/255/63,=20 UDMA(133) blk: queue c034076c, I/O limit 4095Mb (mask 0xffffffff) hdc: host protected area =3D> 1 hdc: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=3D158816/16/63,=20 UDMA(100) blk: queue c03408a8, I/O limit 4095Mb (mask 0xffffffff) hdd: host protected area =3D> 1 hdd: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=3D158816/16/63,=20 UDMA(100) blk: queue c0340ab4, I/O limit 4095Mb (mask 0xffffffff) hde: host protected area =3D> 1 hde: 80041248 sectors (40981 MB) w/2048KiB Cache, CHS=3D79406/16/63,=20 UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 p1= 2=20 p13 p14 p15 p16 > /dev/ide/host0/bus0/target1/lun0: p1 p2 p4 < p5 p6 p7 p8 > /dev/ide/host0/bus1/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 p9 p10 p11 > /dev/ide/host0/bus1/target1/lun0: [PTBL] [9964/255/63] p1 p2 < p5 p6 p= 7=20 p8 > p3 /dev/ide/host2/bus0/target0/lun0: [PTBL] [4982/255/63] p1 =46loppy drive(s): fd0 is 1.44M =46DC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 690M agpgart: Detected Via Apollo Pro KT400 chipset agpgart: AGP aperture is 128M @ 0xd0000000 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.28 aic7860: Ultra Single Channel A, SCSI Id=3D7, 3/253 SCBs Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:1): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: YAMAHA Model: CRW8424S Rev: 1.0j Type: CD-ROM ANSI SCSI revision: 02 (scsi0:A:3): 10.000MB/s transfers (10.000MHz, offset 15) Vendor: UMAX Model: Astra 2400S Rev: V1.1 Type: Scanner ANSI SCSI revision: 02 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 utmisc-0721 [02] Ut_acquire_mutex : Thread 1 could not acquire=20 Mutex [ACPI_MTX_Namespace] AE_BAD_PARAMETER acpiphp_glue: acpiphp_glue_init: acpi_walk_namespace() failed NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. =46reeing unused kernel memory: 120k freed Adding Swap: 530104k swap-space (priority -1) Adding Swap: 514040k swap-space (priority -2) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,69), internal journal gameport0: NS558 ISA at 0x201 speed 932 kHz input0: Analog 3-axis 4-button joystick at gameport0.0 [TSC timer, 1603= =20 MHz clock, 1107 ns res] usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 09:43:24 Feb 15 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xac00, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html eth0: RealTek RTL-8029 found at 0x9400, IRQ 17, 00:50:FC:37:69:15. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). i2c-core.o: i2c core module version 2.7.0 (20021208) i2c-dev.o: i2c /dev entries driver module version 2.7.0 (20021208) i2c-viapro.o version 2.7.0 (20021208) i2c-viapro.o: Found Via VT8233A/8235 device i2c-dev.o: Registered 'SMBus Via Pro adapter at 5000' as minor 0 i2c-viapro.o: Via Pro SMBus detected and initialized i2c-isa.o version 2.7.0 (20021208) i2c-dev.o: Registered 'ISA main adapter' as minor 1 i2c-isa.o: ISA bus access for i2c modules initialized. i2c-proc.o version 2.7.0 (20021208) adm1021.o version 2.7.0 (20021208) hub.c: new USB device 00:10.1-1, assigned address 2 usb.c: USB device 2 (vend/prod 0x6b9/0x4061) is not claimed by any acti= ve=20 driver. eeprom.o version 2.7.0 (20021208) it87.o version 2.7.0 (20021208) Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0, type 6 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 HDLC line discipline: version $Revision: 3.3 $, maxframe=3D4096 N_HDLC line discipline registered. hub.c: new USB device 00:10.1-2, assigned address 3 PPP BSD Compression module registered PPP Deflate Compression module registered usb.c: USB device 3 (vend/prod 0x3f0/0x904) is not claimed by any activ= e=20 driver. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is=20 recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is=20 recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,71), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting fs with errors, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,69), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: mounting fs with errors, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is=20 recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,71), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,72), internal journal EXT3-fs: mounted filesystem with ordered data mode. hub.c: new USB device 00:10.2-2, assigned address 2 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is=20 recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,72), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: USB device 2 (vend/prod 0x45e/0x39) is not claimed by any active= =20 driver. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is=20 recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,15), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,10), internal journal EXT3-fs: mounted filesystem with ordered data mode. usb.c: registered new driver usblp printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 v= id=20 0x03F0 pid 0x0904 printer.c: v0.11: USB Printer Device Class driver usb.c: registered new driver usb_mouse usb-uhci.c: interrupt, status 3, frame# 554 input1: Microsoft Microsoft IntelliMouse=AE Optical on usb3:2.0 usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice PCI: Setting latency timer of device 00:11.5 to 64 blk: queue c0340424, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0340560, I/O limit 4095Mb (mask 0xffffffff) blk: queue c034076c, I/O limit 4095Mb (mask 0xffffffff) blk: queue c03408a8, I/O limit 4095Mb (mask 0xffffffff) blk: queue c0340ab4, I/O limit 4095Mb (mask 0xffffffff) win4lin: mki_version 5, num_cpus 1, pae 0 win4Lin: preempt_enable 0x00000000 ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (6143 buckets, 49144 max) - 292 bytes per=20 conntrack parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP] lp0: using parport0 (polling). svc: unknown version (3) usb_control/bulk_msg: timeout usbdevfs: USBDEVFS_BULK failed dev 2 ep 0x85 len 512 ret -110 --=20 Gentoo-1.4.2.8 Unstable. KDE: 3.1.0 Qt: 3.1.0 AMD Athlon(tm) XP 1900+ 768MB. Kernel: 2.4.20-xfs_pre6. GCC 3.2.2