Linux version 2.4.20-k7 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Tue Jan 14 00:29:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000020000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 000f5470 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 131072 zone(0): 4096 pages. zone(1): 126976 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.1 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: BOOT_IMAGE=deb20k7 ro root=302 hdb=ide-scsi Initializing CPU#0 Detected 1248.779 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2490.36 BogoMIPS Memory: 513188k/524288k available (876k kernel code, 10716k reserved, 418k data, 92k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 001 01 1 1 0 1 0 1 1 79 0c 001 01 0 0 0 0 0 1 1 81 0d 001 01 0 0 0 0 0 1 1 89 0e 001 01 0 0 0 0 0 1 1 91 0f 001 01 0 0 0 0 0 1 1 99 10 001 01 1 1 0 1 0 1 1 79 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 51 13 001 01 1 1 0 1 0 1 1 81 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5-> 0:18 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:17 IRQ11 -> 0:11-> 0:16 IRQ12 -> 0:12-> 0:19 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1248.8039 MHz. ..... host bus clock speed is 199.8086 MHz. cpu: 0, clocks: 1998086, slice: 999043 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router VIA [1106/3177] at 00:11.0 PCI->APIC IRQ transform: (B0,I8,P0) -> 16 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B0,I17,P0) -> 11 PCI->APIC IRQ transform: (B0,I18,P0) -> 16 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 131072 bind 65536) Linux IP multicast router 0.06 plus PIM-SM RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 2876 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done. Freeing initrd memory: 2876k freed VFS: Mounted root (cramfs filesystem). Freeing unused kernel memory: 92k freed NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Journalled Block Device driver loaded Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SV8004H, ATA DISK drive hdb: SAMSUNG SV8004H, ATA DISK drive hdc: PIONEER DVD-RW DVR-104, ATAPI CD/DVD-ROM drive hdd: HL-DT-ST RW/DVD GCC-4320B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue e08507e4, I/O limit 4095Mb (mask 0xffffffff) hda: 156368016 sectors (80060 MB) w/1945KiB Cache, CHS=155127/16/63, UDMA(100) blk: queue e0850930, I/O limit 4095Mb (mask 0xffffffff) hdb: 156368016 sectors (80060 MB) w/1945KiB Cache, CHS=155127/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 /dev/ide/host0/bus0/target1/lun0: [PTBL] [9733/255/63] p1 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal Real Time Clock Driver v1.10e SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: PIONEER Model: DVD-RW DVR-104 Rev: 1.40 Type: CD-ROM ANSI SCSI revision: 02 Vendor: HL-DT-ST Model: RW/DVD GCC-4320B Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 ISDN subsystem Rev: 1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1/1.1.4.1 loaded isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found HiSax: Linux Driver for passive ISDN cards HiSax: Version 3.5 (module) HiSax: Layer1 Revision 1.1.4.1 HiSax: Layer2 Revision 1.1.4.1 HiSax: TeiMgr Revision 1.1.4.1 HiSax: Layer3 Revision 1.1.4.1 HiSax: LinkLayer Revision 1.1.4.1 HiSax: Total 1 card defined HiSax: Card 1 Protocol EDSS1 Id=line0 (0) HiSax: AVM PCI driver Rev. 1.1.4.1 FritzPnP: no ISA PnP present AVM PCI: stat 0x3020a AVM PCI: Class A Rev 2 HiSax: AVM Fritz!PCI config irq:17 base:0xD800 AVM PCI: ISAC version (0): 2086/2186 V1.1 AVM Fritz PnP/PCI: IRQ 17 count 0 AVM Fritz PnP/PCI: IRQ 17 count 0 AVM Fritz PnP/PCI: IRQ(17) getting no interrupts during init 1 AVM PCI/PnP: reset AVM PCI/PnP: S1 0 AVM Fritz PnP/PCI: IRQ 17 count 0 AVM Fritz PnP/PCI: IRQ(17) getting no interrupts during init 2 AVM PCI/PnP: reset AVM PCI/PnP: S1 0 AVM Fritz PnP/PCI: IRQ 17 count 0 AVM Fritz PnP/PCI: IRQ(17) getting no interrupts during init 3 HiSax: Card AVM Fritz PnP/PCI not installed ! ISDN-subsystem unloaded parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected lp0: using parport0 (polling). Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 440M agpgart: Unsupported Via chipset (device id: 3189), you might want to try agp_try_unsupported=1. agpgart: no supported devices found. 8139too Fast Ethernet driver 0.9.26 via-rhine.c:v1.10-LK1.1.14 May-3-2002 Written by Donald Becker http://www.scyld.com/network/via-rhine.html eth0: VIA VT6102 Rhine-II at 0xec00, 00:0a:e6:3c:d1:bb, IRQ 16. eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 45e1. eth0: Setting full-duplex based on MII #1 link partner capability of 45e1. udf: registering filesystem Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray cdrom: open failed. usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 00:55:24 Jan 14 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub blk: queue e08507e4, I/O limit 4095Mb (mask 0xffffffff) blk: queue e0850930, I/O limit 4095Mb (mask 0xffffffff) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 00:55:24 Jan 14 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver uhci.c: USB Universal Host Controller Interface driver v1.1 usb.c: deregistering driver usbdevfs usb.c: deregistering driver hub ip_conntrack version 2.1 (4096 buckets, 32768 max) - 292 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)