From mboxrd@z Thu Jan 1 00:00:00 1970 From: Phaedrus Subject: unexpected IO-APIC Date: Thu, 17 Apr 2003 19:43:02 -0700 (PDT) Sender: linux-smp-owner@vger.kernel.org Message-ID: <20030418024302.68903.qmail@web12107.mail.yahoo.com> Mime-Version: 1.0 Return-path: List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-smp@vger.kernel.org Hello I am running Bamboo on an Athelon 2100xp on an Gigabyte KT 400 Moboard. 512 megs ram, Radeon 7000 video card, creative sblive value sound card and a initio scsi card. That is it. Feel free to mail me if you like. Full dmesg follows. Linux version 2.4.21-0.13mdk (flepied@bi.mandrakesoft.com) (gcc version 3.2.2 (Mandrake Linux 9.1 3.2.2-3mdk)) #1 Fri Mar 14 15:08:06 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f4b80 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 131056 zone(0): 4096 pages. zone(1): 126960 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Kernel command line: BOOT_IMAGE=linux ro root=307 devfs=mount hdd=ide-scsi acpi=off ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1768.330 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3525.83 BogoMIPS Memory: 515040k/524224k available (1410k kernel code, 8796k reserved, 1118k data, 136k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU: AMD Athlon(tm) XP 2100+ stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-19, 2-20, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 79 0d 001 01 0 0 0 0 0 1 1 81 0e 001 01 0 0 0 0 0 1 1 89 0f 001 01 0 0 0 0 0 1 1 91 10 001 01 1 1 0 1 0 1 1 99 11 001 01 1 1 0 1 0 1 1 A1 12 001 01 1 1 0 1 0 1 1 A9 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B1 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ21 -> 0:21 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1768.2868 MHz. ..... host bus clock speed is 272.0440 MHz. cpu: 0, clocks: 2720440, slice: 1360220 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20030122 ACPI: Disabled via command line (acpi=off) PCI: PCI BIOS revision 2.10 entry at 0xf9d30, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router default [1106/3189] at 00:00.0 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I12,P0) -> 16 PCI->APIC IRQ transform: (B0,I16,P0) -> 21 PCI->APIC IRQ transform: (B0,I16,P1) -> 21 PCI->APIC IRQ transform: (B0,I16,P2) -> 21 PCI->APIC IRQ transform: (B0,I19,P0) -> 18 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI: Via IRQ fixup for 00:10.0, from 11 to 5 PCI: Via IRQ fixup for 00:10.1, from 11 to 5 PCI: Via IRQ fixup for 00:10.2, from 10 to 5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) Starting kswapd VFS: Disk quotas vdquot_6.5.1 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 00:11.1 PCI: No IRQ known for interrupt pin A of device 00:11.1. Probably buggy MP table. VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1 ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD400BB-00DEA0, ATA DISK drive hda: DMA disabled blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff) hdc: CDU5211, ATAPI CD/DVD-ROM drive hdd: TDK CDRW8432, ATAPI CD/DVD-ROM drive hdc: DMA disabled hdd: DMA disabled ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 156k freed VFS: Mounted root (ext2 filesystem). Mounted devfs on /dev SCSI subsystem driver Revision: 1.00 i91u: PCI Base=0xD000, IRQ=17, BIOS=0xFF000, SCSI ID=7 i91u: Reset SCSI Bus ... scsi0 : Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g Journalled Block Device driver loaded EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: ide0(3,7): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 215501 ext3_orphan_cleanup: deleting unreferenced inode 215500 ext3_orphan_cleanup: deleting unreferenced inode 215499 EXT3-fs: ide0(3,7): 3 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Mounted devfs on /dev Freeing unused kernel memory: 136k freed Real Time Clock Driver v1.10e usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: USB UHCI at I/O 0xdc00, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 21 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal Adding Swap: 457812k swap-space (priority -1) Adding Swap: 457812k swap-space (priority -2) Adding Swap: 562232k swap-space (priority -3) Adding Swap: 514040k swap-space (priority -4) scsi1 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TDK Model: CDRW8432 Rev: 1.07 Type: CD-ROM ANSI SCSI revision: 02 hdc: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,13), internal journal EXT3-fs: mounted filesystem with ordered data mode. MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 MSDOS FS: IO charset iso8859-1 MSDOS FS: Using codepage 850 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,11), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 Fast Ethernet at 0xe098f000, 00:20:ed:61:d9:74, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139C' inserting floppy driver for 2.4.21-0.13mdk Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1.Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 439M agpgart: Detected Via Apollo Pro KT400 chipset agpgart: AGP aperture is 128M @ 0xd0000000 [drm] AGP 0.99 aperture @ 0xd0000000 128MB [drm] Initialized radeon 1.7.0 20020828 on minor 0 __________________________________________________ Do you Yahoo!? The New Yahoo! Search - Faster. Easier. Bingo http://search.yahoo.com