From mboxrd@z Thu Jan 1 00:00:00 1970 From: W M Brelsford Subject: unexpected IO-APIC Date: Sat, 22 Nov 2003 22:38:57 -0800 Sender: linux-smp-owner@vger.kernel.org Message-ID: <20031123063857.GA4776@k2khb> Mime-Version: 1.0 Return-path: Content-Disposition: inline List-Id: Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-smp@vger.kernel.org As requested, sending you dmesg output containing "unexpected IO-APIC": Linux version 2.4.18-bf2.4 (root@zombie) (gcc version 2.95.4 20011002 (Debian prerelease)) #1 Son Apr 14 09:53:28 CEST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. found SMP MP-table at 000f5140 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f0000 reserved twice. hm, page 000f1000 reserved twice. On node 0 totalpages: 229376 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Unknown CPU [15:2] APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: auto BOOT_IMAGE=Linux ro root=302 Initializing CPU#0 Detected 2612.618 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 5216.66 BogoMIPS Memory: 899800k/917504k available (1783k kernel code, 17316k reserved, 549k data, 280k init, 0k highmem) Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: Before vendor init, caps: bfebfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 512K CPU: After vendor init, caps: bfebfbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz stepping 09 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-3, 2-5, 2-9, 2-11, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 24. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 000 00 1 0 0 0 0 0 0 00 04 001 01 0 0 0 0 0 1 1 41 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 49 07 001 01 0 0 0 0 0 1 1 51 08 001 01 0 0 0 0 0 1 1 59 09 000 00 1 0 0 0 0 0 0 00 0a 001 01 0 0 0 0 0 1 1 61 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 69 0d 001 01 0 0 0 0 0 1 1 71 0e 001 01 0 0 0 0 0 1 1 79 0f 001 01 0 0 0 0 0 1 1 81 10 001 01 1 1 0 1 0 1 1 89 11 001 01 1 1 0 1 0 1 1 91 12 001 01 1 1 0 1 0 1 1 99 13 001 01 1 1 0 1 0 1 1 A1 14 001 01 1 1 0 1 0 1 1 A9 15 001 01 1 1 0 1 0 1 1 B1 16 000 00 1 0 0 0 0 0 0 00 17 001 01 1 1 0 1 0 1 1 B9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2612.5816 MHz. ..... host bus clock speed is 200.9676 MHz. cpu: 0, clocks: 2009676, slice: 1004838 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb6a0, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 0: assuming transparent Unknown bridge resource 2: assuming transparent PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 16 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I0,P0) -> 18 PCI->APIC IRQ transform: (B2,I5,P0) -> 21 PCI->APIC IRQ transform: (B2,I8,P0) -> 20 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded vga16fb: initializing vga16fb: mapped to 0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10e block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: chipset revision 2 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hda: WDC WD800JB-00ETA0, ATA DISK drive hdb: WDC WD800JB-00ETA0, ATA DISK drive hdc: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive hdd: SONY DVD RW DW-U14A, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63 hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63 hdc: ATAPI 48X DVD-ROM drive, 512kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Loading I2O Core - (c) Copyright 1999 Red Hat Software I2O configuration manager v 0.04. (C) Copyright 1999 Red Hat Software loop: loaded (max 8 devices) Compaq CISS Driver (v 2.4.5) 8139cp 10/100 PCI Ethernet driver v0.0.6 (Nov 19, 2001) 8139cp: pci dev 02:00.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible chip 8139cp: Try the "8139too" driver instead. 8139too Fast Ethernet driver 0.9.24 eth0: RealTek RTL8139 Fast Ethernet at 0xf881a000, 00:30:bd:03:81:82, IRQ 18 eth0: Identified 8139 chip type 'RTL-8139C' HDLC support module revision 1.02 for Linux 2.4 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. ide-floppy driver 0.97.sv Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver, Apr 14 2002 DC390: 0 adapters found 3ware Storage Controller device driver for Linux v1.02.00.016. 3w-xxxx: No cards with valid units found. request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted i2o_scsi.c: Version 0.0.1 chain_pool: 0 bytes @ f7eb3540 (512 byte buffers X 4 can_queue X 0 i2o controllers) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 280k freed Adding Swap: 979924k swap-space (priority -1) Adding Swap: 979924k swap-space (priority -2) EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,2), internal journal usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 10:29:43 Apr 14 2002 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xbc00, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xb000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xb400, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb.c: registered new driver keyboard usbkbd.c: :USB HID Boot Protocol keyboard driver kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,70), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,67), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,71), internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: Setting 100mbps half-duplex based on auto-negotiated partner ability 40a1.