From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Blakley Subject: unexpected IO-APIC Date: Wed, 17 Dec 2003 23:21:57 -0800 (PST) Sender: linux-smp-owner@vger.kernel.org Message-ID: <20031218072157.91374.qmail@web40204.mail.yahoo.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="0-362297454-1071732117=:90778" Return-path: List-Id: To: linux-smp@vger.kernel.org --0-362297454-1071732117=:90778 Content-Type: text/plain; charset=us-ascii Content-Id: Content-Disposition: inline sending as requested, let me know if any additional information is needed. __________________________________ Do you Yahoo!? New Yahoo! Photos - easier uploading and sharing. http://photos.yahoo.com/ --0-362297454-1071732117=:90778 Content-Type: text/plain; name="dmesg-knoppix-intel-d865perl.txt" Content-Description: dmesg-knoppix-intel-d865perl.txt Content-Disposition: inline; filename="dmesg-knoppix-intel-d865perl.txt" L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05 per-CPU timeslice cutoff: 1462.56 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 5583.66 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 05 Total of 2 processors activated (11154.22 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 25. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 A9 11 003 03 1 1 0 1 0 1 1 B1 12 003 03 1 1 0 1 0 1 1 B9 13 003 03 1 1 0 1 0 1 1 C1 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 003 03 1 1 0 1 0 1 1 C9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2793.0354 MHz. ..... host bus clock speed is 199.5024 MHz. cpu: 0, clocks: 1995024, slice: 665008 CPU0 cpu: 1, clocks: 1995024, slice: 665008 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router default [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I2,P0) -> 17 PCI->APIC IRQ transform: (B2,I7,P0) -> 17 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Disk quotas vdquot_6.5.1 vesafb: framebuffer at 0xe8000000, mapped to 0xf880d000, size 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0a15 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device pty: 256 Unix98 ptys configured Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: BIOS setup was incomplete. PCI_IDE: chipset revision 2 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1 PCI_IDE: chipset revision 2 PCI_IDE: 100% native mode on irq 18 ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio hda: WDC WD400BB-00CFC0, ATA DISK drive hdb: Maxtor 6Y120P0, ATA DISK drive hdc: PLEXTOR CD-R PX-W1610A, ATAPI CD/DVD-ROM drive hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63 hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63 ide-cd: passing drive hdc to ide-scsi emulation. Partition check: hda: [PTBL] [4865/255/63] hda1 hdb: hdb1 hdb2 hdb3 hdd:<3>ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 0 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 2 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 4 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 6 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 0 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 2 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 4 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 6 ldm_validate_partition_table(): Disk read failed. ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 0 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 2 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 4 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 6 unable to read partition table Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. Promise Fasttrak(tm) Softwareraid driver 0.03beta: No raid array found Highpoint HPT370 Softwareraid driver for linux version 0.01 No raid array found SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: IOMEGA Model: ZIP 100 Rev: 14.A Type: Direct-Access ANSI SCSI revision: 00 Vendor: PLEXTOR Model: CD-R PX-W1610A Rev: 1.02 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 sda : READ CAPACITY failed. sda : status = 0, message = 00, host = 0, driver = 28 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 ldm_validate_partition_table(): Disk read failed. I/O error: dev 08:00, sector 0 unable to read partition table Attached scsi CD-ROM sr0 at scsi0, channel 0, id 1, lun 0 sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 462k freed EXT2-fs warning: checktime reached, running e2fsck is recommended VFS: Mounted root (ext2 filesystem). NCR53c406a: no available ports found aec671x_detect: scsi: Detection failed (no card) megaraid: v1.18 (Release Date: Thu Oct 11 15:02:53 EDT 2001) megaraid: no BIOS enabled. DC390: 0 adapters found Failed initialization of WD-7000 SCSI card! ISO 9660 Extensions: Microsoft Joliet Level 3 kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 kmod: failed to exec /sbin/modprobe -s -k nls_iso8859-1, errno = 2 ISO 9660 Extensions: RRIP_1991A cloop: Welcome to cloop v0.68 cloop: /cdrom/KNOPPIX/KNOPPIX: 29891 blocks, 65536 bytes/block, largest block is 65562 bytes. cloop: loaded (max 1 devices) ISO 9660 Extensions: RRIP_1991A Freeing unused kernel memory: 128k freed Real Time Clock Driver v1.10e apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe (power off active). Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] Intel PCIC probe: not found. Databook TCIC-2 PCMCIA probe: not found. unloading Kernel Card Services usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:50:01 Mar 26 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usbdevfs: remount parameter error hub.c: new USB device 00:1d.0-2, assigned address 2 usb.c: USB device 2 (vend/prod 0x45e/0x39) is not claimed by any active driver. mice: PS/2 mouse device common for all mice usb.c: registered new driver hiddev usb.c: registered new driver hid usb-uhci.c: interrupt, status 3, frame# 531 input0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb1:2.0 hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected ohci1394: $Rev: 578 $ Ben Collins ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[feafe000-feafe7ff] Max Packet=[2048] ieee1394: Host added: Node[00:1023] GUID[000cf100009abc38] [Linux OHCI-1394] ieee1394: Host removed: Node[00:1023] GUID[000cf100009abc38] [Linux OHCI-1394] i810_rng hardware driver 0.9.8 loaded eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:02:B3:49:46:BE, IRQ 17. Board assembly 721383-017, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). FAT: Did not find valid FSINFO signature. Found signature1 0x66024a1e signature2 0xc88b6602 sector=4. VFS: Can't find a valid FAT filesystem on dev 03:01. FAT: Did not find valid FSINFO signature. Found signature1 0x66024a1e signature2 0xc88b6602 sector=4. VFS: Can't find a valid FAT filesystem on dev 03:01. NTFS driver v1.1.22 [Flags: R/W MODULE] Journalled Block Device driver loaded VFS: Can't find ext3 filesystem on dev ide0(3,67). VFS: Can't find ext2 filesystem on dev ide0(3,67). Unable to identify CD-ROM format. read_super_block: can't find a reiserfs filesystem on (dev 03:43, block 64, size 1024) read_super_block: can't find a reiserfs filesystem on (dev 03:43, block 8, size 1024) FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:43. SGI XFS snapshot 2.4.20-2002-11-29_01:21_UTC with ACLs, DMAPI, realtime, quota, no debug enabled XFS: bad magic number XFS: SB validate failed VFS: Can't find a Minix or Minix V2 filesystem on device 03:43. VFS: Can't find a HFS filesystem on dev 03:43. EFS: 1.0a - http://aeschi.ch.eu.org/efs/ Device not ready. Make sure there is a disc in the drive. sda : READ CAPACITY failed. sda : status = 0, message = 00, host = 0, driver = 28 Current sd00:00: sense key Not Ready Additional sense indicates Medium not present sda : block size assumed to be 512 bytes, disk size 1GB. sda: I/O error: dev 08:00, sector 0 I/O error: dev 08:00, sector 0 ldm_validate_partition_table(): Disk read failed. I/O error: dev 08:00, sector 0 unable to read partition table ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 0 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 2 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 4 ide-scsi: hdd: unsupported command in request queue (0) end_request: I/O error, dev 16:40 (hdd), sector 6 end_request: I/O error, dev 02:00 (floppy), sector 0 FAT: bogus logical sector size 0 VFS: Can't find a valid FAT filesystem on dev 03:43. --0-362297454-1071732117=:90778--