Linux version 2.4.24-sp4 (paolop@linux) (gcc version 3.2.2) #4 mar gen 6 20:51:43 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000010000000 (usable) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 256MB LOWMEM available. ACPI: have wakeup address 0xc0001000 found SMP MP-table at 000f4c10 hm, page 000f4000 reserved twice. hm, page 000f5000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. ACPI: Unable to locate RSDP Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Kernel command line: auto BOOT_IMAGE=linux ro root=802 Initializing CPU#0 Detected 2399.962 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4784.12 BogoMIPS Memory: 256240k/262144k available (1715k kernel code, 5520k reserved, 593k data, 108k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-10, 2-11, 2-12 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 21. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178014 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0014 An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 000 00 1 0 0 0 0 0 0 00 06 001 01 0 0 0 0 0 1 1 51 07 001 01 0 0 0 0 0 1 1 59 08 001 01 0 0 0 0 0 1 1 61 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 001 01 0 0 0 0 0 1 1 69 0e 001 01 0 0 0 0 0 1 1 71 0f 001 01 0 0 0 0 0 1 1 79 10 001 01 1 1 0 1 0 1 1 81 11 001 01 1 1 0 1 0 1 1 89 12 001 01 1 1 0 1 0 1 1 91 13 001 01 1 1 0 1 0 1 1 99 14 001 01 1 1 0 1 0 1 1 A1 15 001 01 1 1 0 1 0 1 1 A9 16 001 01 1 1 0 1 0 1 1 B1 17 001 01 1 1 0 1 0 1 1 B9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ21 -> 0:21 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2400.0071 MHz. ..... host bus clock speed is 133.3336 MHz. cpu: 0, clocks: 1333336, slice: 666668 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel ACPI: Subsystem revision 20031002 PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=1 PCI: Using configuration type 1 ACPI: System description tables not found ACPI-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND ACPI-0134: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND ACPI: Unable to load the System Description Tables PCI: Probing PCI hardware PCI: ACPI tables contain no PCI IRQ routing entries PCI: Probing PCI hardware (bus 00) PCI: Using IRQ router SIS96x [1039/0008] at 00:02.0 PCI->APIC IRQ transform: (B0,I2,P0) -> 16 PCI->APIC IRQ transform: (B0,I2,P2) -> 18 PCI->APIC IRQ transform: (B0,I3,P0) -> 20 PCI->APIC IRQ transform: (B0,I3,P1) -> 21 PCI->APIC IRQ transform: (B0,I3,P2) -> 22 PCI->APIC IRQ transform: (B0,I3,P3) -> 23 PCI->APIC IRQ transform: (B0,I4,P0) -> 19 PCI->APIC IRQ transform: (B0,I10,P0) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded pty: 512 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Partition check: hda:end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 end_request: I/O error, dev 03:00 (hda), sector 0 end_request: I/O error, dev 03:00 (hda), sector 2 end_request: I/O error, dev 03:00 (hda), sector 4 end_request: I/O error, dev 03:00 (hda), sector 6 unable to read partition table SCSI subsystem driver Revision: 1.00 scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs (scsi1:A:0): 40.000MB/s transfers (20.000MHz, offset 8, 16bit) Vendor: IBM Model: DDYS-T18350N Rev: S80D Type: Direct-Access ANSI SCSI revision: 03 (scsi1:A:4): 20.000MB/s transfers (20.000MHz, offset 15) Vendor: YAMAHA Model: CRW8824S Rev: 1.00 Type: CD-ROM ANSI SCSI revision: 02 scsi1:A:0:0: Tagged Queuing enabled. Depth 32 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB) sda: sda1 sda2 sda3 < sda5 sda6 sda7 > sda4 Attached scsi CD-ROM sr0 at scsi1, channel 0, id 4, lun 0 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: sd(8,2): orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 26757 EXT3-fs: sd(8,2): 1 orphan inode deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 108k freed Adding Swap: 136544k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,5), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,6), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. Real Time Clock Driver v1.10e apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected lp0: using parport0 (polling). 8139too Fast Ethernet driver 0.9.26 8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003) sis900.c: v1.08.06 9/24/2002 eth0: VIA 6103 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:01:29:20:54:8d. SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:pio, hdd:pio usb.c: registered new driver usbdevfs usb.c: registered new driver hub ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 00:03.3: irq 23, pci mem d0852000 usb.c: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 00:03.3 ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4 hub.c: USB hub found hub.c: 6 ports detected usb-ohci.c: USB OHCI at membase 0xd085a000, IRQ 20 usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xd085c000, IRQ 21 usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-ohci.c: USB OHCI at membase 0xd085e000, IRQ 22 usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] USB 1.0 Controller (#3) usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB Universal Host Controller Interface driver v1.1 usb-uhci.c: $Revision: 1.275 $ time 20:59:41 Jan 6 2004 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver eth0: Media Link On 100mbps full-duplex Installing knfsd (copyright (C) 1996 okir@monad.swb.de).