From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Ernet Subject: Error report as requested Date: Sun, 4 Apr 2004 09:41:01 +0200 Sender: linux-smp-owner@vger.kernel.org Message-ID: <200404040941.01851.ernet.t@bluewin.ch> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline List-Id: Content-Type: text/plain; charset="us-ascii" To: linux-smp@vger.kernel.org Dear all. during booting I found the following message: An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to linux-smp@vger.kernel.org So I witte this mail Please find below the part from the boot.msg. I found this as the system is quite unstabel and freeses from time to time (Really frees, nothing to do, even not reachable from outside.) I run a Suse Linux 9.0 Kernel 2.4.199smp PC: Dell Dimensium Pentium 4 2.8 GHz HT 1 G Ram Best regards, Thomas. ENABLING IO-APIC IRQs <4>Setting 2 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 2 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-13 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 41. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>....... : Delivery Type: 0 <7>....... : LTS : 0 <7>.... register #01: 00178020 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0020 <7>.... register #02: 00178020 <7>....... : arbitration: 00 <4>An unexpected IO-APIC was found. If this kernel release is less than <4>three months old please report this to linux-smp@vger.kernel.org <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 003 03 0 0 0 0 0 1 1 39 <7> 02 003 03 0 0 0 0 0 1 1 31 <7> 03 003 03 0 0 0 0 0 1 1 41 <7> 04 003 03 0 0 0 0 0 1 1 49 <7> 05 003 03 0 0 0 0 0 1 1 51 <7> 06 003 03 0 0 0 0 0 1 1 59 <7> 07 003 03 0 0 0 0 0 1 1 61 <7> 08 003 03 0 0 0 0 0 1 1 69 <7> 09 003 03 0 0 0 0 0 1 1 71 <7> 0a 003 03 0 0 0 0 0 1 1 79 <7> 0b 003 03 0 0 0 0 0 1 1 81 <7> 0c 003 03 0 0 0 0 0 1 1 89 <7> 0d 000 00 1 0 0 0 0 0 0 00 <7> 0e 003 03 0 0 0 0 0 1 1 91 <7> 0f 003 03 0 0 0 0 0 1 1 99 <7> 10 003 03 1 1 0 1 0 1 1 A1 <7> 11 003 03 1 1 0 1 0 1 1 A9 <7> 12 003 03 1 1 0 1 0 1 1 B1 <7> 13 003 03 1 1 0 1 0 1 1 B9 <7> 14 003 03 1 1 0 1 0 1 1 C1 <7> 15 003 03 1 1 0 1 0 1 1 C9 <7> 16 003 03 1 1 0 1 0 1 1 D1 <7> 17 003 03 1 1 0 1 0 1 1 D9 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ5 -> 0:5 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ9 -> 0:9 <7>IRQ10 -> 0:10 <7>IRQ11 -> 0:11 <7>IRQ12 -> 0:12 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 0:16 <7>IRQ17 -> 0:17 <7>IRQ18 -> 0:18 <7>IRQ19 -> 0:19 <7>IRQ20 -> 0:20 <7>IRQ21 -> 0:21 <7>IRQ22 -> 0:22 <7>IRQ23 -> 0:23 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2792.0637 MHz. <4>..... host bus clock speed is 199.0473 MHz. <4>cpu: 0, clocks: 199473, slice: 66491 <4>CPU0 <4>cpu: 1, clocks: 199473, slice: 66491 <4>CPU1 <4>checking TSC synchronization across CPUs: passed. <4>migration_task 0 on cpu=0 <4>migration_task 1 on cpu=1 <6>ACPI: Subsystem revision 20030619 <6>ACPI: Disabled via command line (acpi=off) <6>PCI: PCI BIOS revision 2.10 entry at 0xfbb18, last bus=2 <6>PCI: Using configuration type 1 <6>PCI: Probing PCI hardware <4>PCI: Probing PCI hardware (bus 00) <6>PCI: Ignoring BAR0-3 of IDE controller 00:1f.1 <4>Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge <6>PCI: Using IRQ router PIIX [8086/24d0] at 00:1f.0 <6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16 <6>PCI->APIC IRQ transform: (B0,I29,P1) -> 19 <6>PCI->APIC IRQ transform: (B0,I29,P2) -> 18 <6>PCI->APIC IRQ transform: (B0,I29,P0) -> 16 <6>PCI->APIC IRQ transform: (B0,I29,P3) -> 23 <6>PCI->APIC IRQ transform: (B0,I31,P0) -> 18 <6>PCI->APIC IRQ transform: (B0,I31,P0) -> 18 <6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17 <6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16 <6>PCI->APIC IRQ transform: (B2,I1,P0) -> 22 <6>PCI->APIC IRQ transform: (B2,I2,P0) -> 17 <6>PCI->APIC IRQ transform: (B2,I8,P0) -> 20 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) <5>apm: disabled - APM is not SMP safe (power off active). <4>Starting kswapd <4>bigpage subsystem: allocated 0 bigpages (=0MB). <4>allocated 32 pages and 32 bhs reserved for the highmem bounces <4>kinoded started