Oct 18 11:11:46 linux2 random: Saving random seed: succeeded Oct 18 11:11:46 linux2 rpc.statd[773]: Caught signal 15, un-registering and exiting. Oct 18 11:11:46 linux2 nfslock: rpc.statd shutdown succeeded Oct 18 11:11:46 linux2 portmap: portmap shutdown succeeded Oct 18 11:11:46 linux2 kernel: Kernel logging (proc) stopped. Oct 18 11:11:46 linux2 kernel: Kernel log daemon terminating. Oct 18 11:11:47 linux2 syslog: klogd shutdown succeeded Oct 18 11:11:47 linux2 exiting on signal 15 Oct 18 15:03:16 linux2 syslogd 1.4.1: restart. Oct 18 15:03:16 linux2 syslog: syslogd startup succeeded Oct 18 15:03:16 linux2 kernel: klogd 1.4.1, log source = /proc/kmsg started. Oct 18 15:03:16 linux2 kernel: Inspecting /boot/System.map-2.4.9-34smp Oct 18 15:03:16 linux2 syslog: klogd startup succeeded Oct 18 15:03:17 linux2 portmap: portmap startup succeeded Oct 18 15:03:17 linux2 kernel: Loaded 15872 symbols from /boot/System.map-2.4.9-34smp. Oct 18 15:03:17 linux2 kernel: Symbols match kernel version 2.4.9. Oct 18 15:03:17 linux2 kernel: Loaded 318 symbols from 13 modules. Oct 18 15:03:17 linux2 kernel: Linux version 2.4.9-34smp (bhcompile@daffy.perf.redhat.com) (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-108.1)) #1 SMP Sat Jun 1 06:15:25 EDT 2002 Oct 18 15:03:17 linux2 kernel: BIOS-provided physical RAM map: Oct 18 15:03:17 linux2 kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 0000000000100000 - 000000003ff77000 (usable) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 000000003ff77000 - 000000003ff79000 (ACPI NVS) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 000000003ff79000 - 0000000040000000 (reserved) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) Oct 18 15:03:17 linux2 kernel: BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) Oct 18 15:03:17 linux2 kernel: Scanning bios EBDA for MXT signature Oct 18 15:03:17 linux2 kernel: 127MB HIGHMEM available. Oct 18 15:03:17 linux2 kernel: found SMP MP-table at 000fe710 Oct 18 15:03:17 linux2 kernel: hm, page 000fe000 reserved twice. Oct 18 15:03:17 linux2 kernel: hm, page 000ff000 reserved twice. Oct 18 15:03:17 linux2 kernel: hm, page 000f0000 reserved twice. Oct 18 15:03:17 linux2 kernel: On node 0 totalpages: 262007 Oct 18 15:03:17 linux2 kernel: zone(0): 4096 pages. Oct 18 15:03:17 linux2 kernel: zone(1): 225280 pages. Oct 18 15:03:17 linux2 kernel: zone(2): 32631 pages. Oct 18 15:03:17 linux2 rpc.statd[773]: Version 0.3.1 Starting Oct 18 15:03:17 linux2 kernel: ACPI: Searched entire block, no RSDP was found. Oct 18 15:03:17 linux2 nfslock: rpc.statd startup succeeded Oct 18 15:03:17 linux2 kernel: ACPI: RSDP located at physical address c00fd550 Oct 18 15:03:17 linux2 kernel: RSD PTR v0 [DELL ] Oct 18 15:03:17 linux2 kernel: ACPI table found: RSDT v1 [DELL WS 530 0.8] Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: ACPI table found: FACP v1 [DELL WS 530 0.8] Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte fffe6163. Oct 18 15:03:17 linux2 kernel: ACPI table found: SSDT v1 [DELL st_ex 0.4096] Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte fffe6163. Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: ACPI table found: APIC v1 [DELL WS 530 0.8] Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) Oct 18 15:03:17 linux2 kernel: CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16 Oct 18 15:03:17 linux2 kernel: Oct 18 15:03:17 linux2 kernel: LAPIC (acpi_id[0x0002] id[0x2] enabled[1]) Oct 18 15:03:17 linux2 kernel: CPU 1 (0x0200) enabledProcessor #2 Unknown CPU [15:2] APIC version 16 Oct 18 15:03:17 linux2 kernel: Oct 18 15:03:17 linux2 kernel: LAPIC (acpi_id[0x0003] id[0x1] enabled[0]) Oct 18 15:03:17 linux2 kernel: CPU 2 (0x0100) disabled Oct 18 15:03:17 linux2 kernel: LAPIC (acpi_id[0x0004] id[0x3] enabled[0]) Oct 18 15:03:17 linux2 kernel: CPU 3 (0x0300) disabled Oct 18 15:03:17 linux2 kernel: IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) Oct 18 15:03:17 linux2 kernel: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) Oct 18 15:03:17 linux2 kernel: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) Oct 18 15:03:17 linux2 kernel: 4 CPUs total Oct 18 15:03:17 linux2 kernel: Local APIC address fee00000 Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: init.c:145: bad pte 000fd163. Oct 18 15:03:17 linux2 kernel: ACPI table found: BOOT v1 [DELL WS 530 0.8] Oct 18 15:03:17 linux2 kernel: Enabling the CPU's according to the ACPI table Oct 18 15:03:17 linux2 kernel: Intel MultiProcessor Specification v1.4 Oct 18 15:03:17 linux2 kernel: Virtual Wire compatibility mode. Oct 18 15:03:17 linux2 kernel: OEM ID: DELL Product ID: WS 530 APIC at: 0xFEE00000 Oct 18 15:03:17 linux2 kernel: I/O APIC #4 Version 32 at 0xFEC00000. Oct 18 15:03:17 linux2 kernel: Processors: 2 Oct 18 15:03:17 linux2 kernel: Kernel command line: ro root=/dev/hda7 hdc=ide-scsi Oct 18 15:03:17 linux2 kernel: ide_setup: hdc=ide-scsi Oct 18 15:03:17 linux2 kernel: Initializing CPU#0 Oct 18 15:03:17 linux2 kernel: Detected 2193.390 MHz processor. Oct 18 15:03:17 linux2 kernel: Console: colour VGA+ 80x25 Oct 18 15:03:17 linux2 kernel: Calibrating delay loop... 4377.80 BogoMIPS Oct 18 15:03:17 linux2 kernel: Memory: 1025868k/1048028k available (1891k kernel code, 20760k reserved, 103k data, 244k init, 130524k highmem) Oct 18 15:03:17 linux2 kernel: Dentry-cache hash table entries: 131072 (order: 8, 1048576 bytes) Oct 18 15:03:17 linux2 kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Oct 18 15:03:17 linux2 kernel: Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Oct 18 15:03:17 linux2 kernel: Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Oct 18 15:03:17 linux2 kernel: Page-cache hash table entries: 262144 (order: 9, 2097152 bytes) Oct 18 15:03:17 linux2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Oct 18 15:03:17 linux2 kernel: CPU: L2 cache: 512K Oct 18 15:03:17 linux2 kernel: CPU: Physical Processor ID: 0 Oct 18 15:03:17 linux2 kernel: Intel machine check architecture supported. Oct 18 15:03:17 linux2 kernel: Intel machine check reporting enabled on CPU#0. Oct 18 15:03:17 linux2 kernel: Enabling fast FPU save and restore... done. Oct 18 15:03:17 linux2 kernel: Enabling unmasked SIMD FPU exception support... done. Oct 18 15:03:17 linux2 kernel: Checking 'hlt' instruction... OK. Oct 18 15:03:17 linux2 kernel: POSIX conformance testing by UNIFIX Oct 18 15:03:17 linux2 kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) Oct 18 15:03:17 linux2 kernel: mtrr: detected mtrr type: Intel Oct 18 15:03:17 linux2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Oct 18 15:03:17 linux2 kernel: CPU: L2 cache: 512K Oct 18 15:03:17 linux2 kernel: CPU: Physical Processor ID: 0 Oct 18 15:03:17 linux2 kernel: Intel machine check reporting enabled on CPU#0. Oct 18 15:03:17 linux2 kernel: CPU0: Intel(R) XEON(TM) CPU 2.20GHz stepping 04 Oct 18 15:03:17 linux2 kernel: per-CPU timeslice cutoff: 1462.44 usecs. Oct 18 15:03:17 linux2 kernel: enabled ExtINT on CPU#0 Oct 18 15:03:17 linux2 kernel: ESR value before enabling vector: 00000040 Oct 18 15:03:17 linux2 kernel: ESR value after enabling vector: 00000000 Oct 18 15:03:17 linux2 kernel: Booting processor 1/2 eip 2000 Oct 18 15:03:17 linux2 kernel: Initializing CPU#1 Oct 18 15:03:17 linux2 kernel: masked ExtINT on CPU#1 Oct 18 15:03:17 linux2 kernel: ESR value before enabling vector: 00000000 Oct 18 15:03:17 linux2 kernel: ESR value after enabling vector: 00000000 Oct 18 15:03:17 linux2 kernel: Calibrating delay loop... 4377.80 BogoMIPS Oct 18 15:03:17 linux2 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K Oct 18 15:03:17 linux2 kernel: CPU: L2 cache: 512K Oct 18 15:03:17 linux2 kernel: CPU: Physical Processor ID: 3 Oct 18 15:03:17 linux2 kernel: Intel machine check reporting enabled on CPU#1. Oct 18 15:03:17 linux2 kernel: CPU1: Intel(R) XEON(TM) CPU 2.20GHz stepping 04 Oct 18 15:03:17 linux2 kernel: Total of 2 processors activated (8755.60 BogoMIPS). Oct 18 15:03:17 linux2 kernel: WARNING: No sibling found for CPU 0. Oct 18 15:03:17 linux2 kernel: WARNING: No sibling found for CPU 1. Oct 18 15:03:17 linux2 kernel: ENABLING IO-APIC IRQs Oct 18 15:03:17 linux2 kernel: ...changing IO-APIC physical APIC ID to 4 ... ok. Oct 18 15:03:17 linux2 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0 Oct 18 15:03:17 linux2 kernel: testing the IO APIC....................... Oct 18 15:03:17 linux2 kernel: Oct 18 15:03:17 linux2 kernel: WARNING: unexpected IO-APIC, please mail Oct 18 15:03:17 linux2 kernel: to linux-smp@vger.kernel.org Oct 18 15:03:17 linux2 kernel: WARNING: unexpected IO-APIC, please mail Oct 18 15:03:17 linux2 kernel: to linux-smp@vger.kernel.org Oct 18 15:03:17 linux2 kernel: .................................... done. Oct 18 15:03:17 linux2 kernel: Using local APIC timer interrupts. Oct 18 15:03:17 linux2 kernel: calibrating APIC timer ... Oct 18 15:03:17 linux2 kernel: ..... CPU clock speed is 2193.3856 MHz. Oct 18 15:03:17 linux2 kernel: ..... host bus clock speed is 99.6992 MHz. Oct 18 15:03:17 linux2 kernel: cpu: 0, clocks: 996992, slice: 332330 Oct 18 15:03:17 linux2 kernel: CPU0 Oct 18 15:03:17 linux2 kernel: cpu: 1, clocks: 996992, slice: 332330 Oct 18 15:03:17 linux2 kernel: CPU1 Oct 18 15:03:17 linux2 kernel: checking TSC synchronization across CPUs: passed. Oct 18 15:03:17 linux2 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbe4e, last bus=4 Oct 18 15:03:17 linux2 kernel: PCI: Using configuration type 1 Oct 18 15:03:17 linux2 kernel: PCI: Probing PCI hardware Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 0: assuming transparent Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 0: assuming transparent Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 2: assuming transparent Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 0: assuming transparent Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 2: assuming transparent Oct 18 15:03:17 linux2 kernel: Unknown bridge resource 2: assuming transparent Oct 18 15:03:17 linux2 kernel: PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B0,I31,P3) -> 19 Oct 18 15:03:17 linux2 keytable: Loading keymap: succeeded Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B0,I31,P2) -> 23 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B0,I31,P1) -> 17 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B4,I11,P0) -> 23 Oct 18 15:03:17 linux2 kernel: PCI->APIC IRQ transform: (B4,I12,P0) -> 16 Oct 18 15:03:17 linux2 kernel: isapnp: Scanning for PnP cards... Oct 18 15:03:17 linux2 kernel: isapnp: No Plug & Play device found Oct 18 15:03:17 linux2 kernel: Linux NET4.0 for Linux 2.4 Oct 18 15:03:17 linux2 kernel: Based upon Swansea University Computer Society NET3.039 Oct 18 15:03:17 linux2 kernel: Initializing RT netlink socket Oct 18 15:03:17 linux2 kernel: Simple Boot Flag extension found and enabled. Oct 18 15:03:17 linux2 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14) Oct 18 15:03:17 linux2 kernel: apm: disabled - APM is not SMP safe. Oct 18 15:03:17 linux2 kernel: mxt_scan_bios: enter Oct 18 15:03:17 linux2 kernel: Starting kswapd v1.8 Oct 18 15:03:17 linux2 kernel: allocated 64 pages and 64 bhs reserved for the highmem bounces Oct 18 15:03:17 linux2 kernel: VFS: Diskquotas version dquot_6.5.0 initialized Oct 18 15:03:17 linux2 kernel: pty: 2048 Unix98 ptys configured Oct 18 15:03:17 linux2 kernel: Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Oct 18 15:03:17 linux2 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A Oct 18 15:03:17 linux2 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A Oct 18 15:03:17 linux2 kernel: Real Time Clock Driver v1.10e Oct 18 15:03:17 linux2 kernel: block: queued sectors max/low 680912kB/549840kB, 2048 slots per queue Oct 18 15:03:17 linux2 kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Oct 18 15:03:17 linux2 kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 Oct 18 15:03:17 linux2 kernel: ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx Oct 18 15:03:17 linux2 kernel: PIIX4: IDE controller on PCI bus 00 dev f9 Oct 18 15:03:17 linux2 kernel: PIIX4: chipset revision 4 Oct 18 15:03:17 linux2 kernel: PIIX4: not 100%% native mode: will probe irqs later Oct 18 15:03:17 linux2 kernel: ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio Oct 18 15:03:17 linux2 kernel: ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio Oct 18 15:03:17 linux2 kernel: hda: ST340016A, ATA DISK drive Oct 18 15:03:17 linux2 kernel: hdc: LITE-ON LTR-24102M, ATAPI CD/DVD-ROM drive Oct 18 15:03:17 linux2 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Oct 18 15:03:17 linux2 kernel: ide1 at 0x170-0x177,0x376 on irq 15 Oct 18 15:03:17 linux2 kernel: blk: queue c03c0ba0, I/O limit 4095Mb (mask 0xffffffff) Oct 18 15:03:17 linux2 kernel: blk: queue c03c0ba0, I/O limit 4095Mb (mask 0xffffffff) Oct 18 15:03:17 linux2 kernel: hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100) Oct 18 15:03:17 linux2 kernel: Partition check: Oct 18 15:03:17 linux2 keytable: Loading system font: succeeded Oct 18 15:03:17 linux2 kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 > Oct 18 15:03:17 linux2 kernel: Floppy drive(s): fd0 is 1.44M Oct 18 15:03:17 linux2 kernel: FDC 0 is a National Semiconductor PC87306 Oct 18 15:03:17 linux2 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 Oct 18 15:03:17 linux2 kernel: md: Autodetecting RAID arrays. Oct 18 15:03:17 linux2 kernel: md: autorun ... Oct 18 15:03:17 linux2 kernel: md: ... autorun DONE. Oct 18 15:03:17 linux2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.3 Oct 18 15:03:17 linux2 kernel: NET4: Linux TCP/IP 1.0 for NET4.0 Oct 18 15:03:17 linux2 kernel: IP Protocols: ICMP, UDP, TCP, IGMP Oct 18 15:03:17 linux2 kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes Oct 18 15:03:17 linux2 kernel: TCP: Hash tables configured (established 262144 bind 65536) Oct 18 15:03:17 linux2 kernel: Linux IP multicast router 0.06 plus PIM-SM Oct 18 15:03:17 linux2 kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. Oct 18 15:03:17 linux2 kernel: RAMDISK: Compressed image found at block 0 Oct 18 15:03:17 linux2 kernel: Freeing initrd memory: 321k freed Oct 18 15:03:17 linux2 kernel: VFS: Mounted root (ext2 filesystem). Oct 18 15:03:17 linux2 kernel: Journalled Block Device driver loaded Oct 18 15:03:17 linux2 kernel: EXT3-fs: INFO: recovery required on readonly filesystem. Oct 18 15:03:17 linux2 kernel: EXT3-fs: write access will be enabled during recovery. Oct 18 15:03:17 linux2 kernel: kjournald starting. Commit interval 5 seconds Oct 18 15:03:17 linux2 kernel: EXT3-fs: recovery complete. Oct 18 15:03:17 linux2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 18 15:03:17 linux2 kernel: Freeing unused kernel memory: 244k freed Oct 18 15:03:17 linux2 kernel: Adding Swap: 2040212k swap-space (priority -1) Oct 18 15:03:17 linux2 kernel: usb.c: registered new driver usbdevfs Oct 18 15:03:17 linux2 kernel: usb.c: registered new driver hub Oct 18 15:03:17 linux2 kernel: usb-uhci.c: $Revision: 1.259 $ time 06:21:19 Jun 1 2002 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: High bandwidth mode enabled Oct 18 15:03:17 linux2 kernel: PCI: Setting latency timer of device 00:1f.2 to 64 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: USB UHCI at I/O 0xff80, IRQ 19 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: Detected 2 ports Oct 18 15:03:17 linux2 kernel: usb.c: new USB bus registered, assigned bus number 1 Oct 18 15:03:17 linux2 kernel: hub.c: USB hub found Oct 18 15:03:17 linux2 kernel: hub.c: 2 ports detected Oct 18 15:03:17 linux2 kernel: PCI: Setting latency timer of device 00:1f.4 to 64 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: USB UHCI at I/O 0xff60, IRQ 23 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: Detected 2 ports Oct 18 15:03:17 linux2 kernel: hub.c: USB new device connect on bus1/2, assigned device number 2 Oct 18 15:03:17 linux2 kernel: usb.c: new USB bus registered, assigned bus number 2 Oct 18 15:03:17 linux2 kernel: hub.c: USB hub found Oct 18 15:03:17 linux2 kernel: hub.c: 2 ports detected Oct 18 15:03:17 linux2 kernel: hub.c: USB hub found Oct 18 15:03:17 linux2 kernel: usb-uhci.c: v1.251:USB Universal Host Controller Interface driver Oct 18 15:03:17 linux2 kernel: hub.c: 3 ports detected Oct 18 15:03:17 linux2 kernel: hub.c: USB new device connect on bus1/2/1, assigned device number 3 Oct 18 15:03:17 linux2 kernel: usb.c: USB device 3 (vend/prod 0x413c/0x2001) is not claimed by any active driver. Oct 18 15:03:17 linux2 kernel: hub.c: USB new device connect on bus1/2/3, assigned device number 4 Oct 18 15:03:17 linux2 kernel: usb.c: USB device 4 (vend/prod 0x45e/0x47) is not claimed by any active driver. Oct 18 15:03:17 linux2 kernel: usb.c: registered new driver hid Oct 18 15:03:17 linux2 kernel: input0: USB HID v1.00 Keyboard [NMB Dell USB 7HK Keyboard] on usb1:3.0 Oct 18 15:03:17 linux2 kernel: hiddev0: USB HID v1.00 Device [NMB Dell USB 7HK Keyboard] on usb1:3.1 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: interrupt, status 3, frame# 1417 Oct 18 15:03:17 linux2 kernel: usb-uhci.c: interrupt, status 3, frame# 1424 Oct 18 15:03:17 linux2 kernel: input1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb1:4.0 Oct 18 15:03:17 linux2 kernel: usb.c: registered new driver hiddev Oct 18 15:03:17 linux2 kernel: hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik Oct 18 15:03:17 linux2 kernel: hid-core.c: USB HID support drivers Oct 18 15:03:17 linux2 kernel: mice: PS/2 mouse device common for all mice Oct 18 15:03:17 linux2 kernel: EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,7), internal journal Oct 18 15:03:17 linux2 kernel: kjournald starting. Commit interval 5 seconds Oct 18 15:03:17 linux2 kernel: EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,2), internal journal Oct 18 15:03:17 linux2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 18 15:03:17 linux2 kernel: kjournald starting. Commit interval 5 seconds Oct 18 15:03:17 linux2 kernel: EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,6), internal journal Oct 18 15:03:17 linux2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 18 15:03:17 linux2 kernel: kjournald starting. Commit interval 5 seconds Oct 18 15:03:17 linux2 kernel: EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,3), internal journal Oct 18 15:03:17 linux2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 18 15:03:17 linux2 kernel: kjournald starting. Commit interval 5 seconds Oct 18 15:03:17 linux2 kernel: EXT3 FS 2.4-0.9.11, 3 Oct 2001 on ide0(3,8), internal journal Oct 18 15:03:17 linux2 kernel: EXT3-fs: mounted filesystem with ordered data mode. Oct 18 15:03:17 linux2 kernel: SCSI subsystem driver Revision: 1.00 Oct 18 15:03:17 linux2 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices Oct 18 15:03:17 linux2 kernel: Vendor: LITE-ON Model: LTR-24102M Rev: 4DS3 Oct 18 15:03:17 linux2 kernel: Type: CD-ROM ANSI SCSI revision: 02 Oct 18 15:03:17 linux2 kernel: 0x378: FIFO is 16 bytes Oct 18 15:03:17 linux2 kernel: 0x378: writeIntrThreshold is 8 Oct 18 15:03:17 linux2 kernel: 0x378: readIntrThreshold is 8 Oct 18 15:03:17 linux2 random: Initializing random number generator: succeeded Oct 18 15:03:17 linux2 kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] Oct 18 15:03:17 linux2 kernel: parport0: irq 7 detected Oct 18 15:03:17 linux2 kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html Oct 18 15:03:17 linux2 kernel: 04:0b.0: 3Com PCI 3c905C Tornado at 0xec80. Vers LK1.1.16 Oct 18 15:02:51 linux2 rc.sysinit: Mounting proc filesystem: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Unmounting initrd: succeeded Oct 18 15:02:51 linux2 sysctl: net.ipv4.ip_forward = 0 Oct 18 15:02:51 linux2 sysctl: net.ipv4.conf.default.rp_filter = 1 Oct 18 15:02:51 linux2 sysctl: kernel.sysrq = 0 Oct 18 15:02:51 linux2 rc.sysinit: Configuring kernel parameters: succeeded Oct 18 15:02:51 linux2 date: Fri Oct 18 15:02:39 EDT 2002 Oct 18 15:02:51 linux2 rc.sysinit: Setting clock (localtime): Fri Oct 18 15:02:39 EDT 2002 succeeded Oct 18 15:02:51 linux2 rc.sysinit: Loading default keymap succeeded Oct 18 15:02:51 linux2 rc.sysinit: Setting default font (lat0-sun16): succeeded Oct 18 15:02:51 linux2 rc.sysinit: Activating swap partitions: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Setting hostname linux2: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Mounting USB filesystem: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Initializing USB controller (usb-uhci): succeeded Oct 18 15:02:51 linux2 rc.sysinit: Initializing USB HID interface: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Initializing USB keyboard: succeeded Oct 18 15:02:51 linux2 rc.sysinit: Initializing USB mouse: succeeded Oct 18 15:02:51 linux2 fsck: /: clean, 17948/98392 files, 108458/393561 blocks Oct 18 15:02:51 linux2 rc.sysinit: Checking root filesystem succeeded Oct 18 15:02:51 linux2 rc.sysinit: Remounting root filesystem in read-write mode: succeeded Oct 18 15:02:52 linux2 rc.sysinit: Finding module dependencies: succeeded Oct 18 15:02:52 linux2 fsck: /boot: recovering journal Oct 18 15:02:53 linux2 fsck: /boot: clean, 41/12048 files, 9306/48195 blocks Oct 18 15:02:53 linux2 fsck: /home: recovering journal Oct 18 15:02:53 linux2 fsck: /home: clean, 93/1300480 files, 898926/2600514 blocks Oct 18 15:02:53 linux2 fsck: /usr: recovering journal Oct 18 15:02:53 linux2 fsck: /usr: clean, 109209/2605056 files, 1639691/5203051 blocks Oct 18 15:02:54 linux2 fsck: /var: recovering journal Oct 18 15:02:56 linux2 fsck: /var: clean, 981/66264 files, 105415/265041 blocks Oct 18 15:02:56 linux2 rc.sysinit: Checking filesystems succeeded Oct 18 15:02:57 linux2 rc.sysinit: Mounting local filesystems: succeeded Oct 18 15:02:57 linux2 rc.sysinit: Enabling local filesystem quotas: succeeded Oct 18 15:02:57 linux2 rc.sysinit: Enabling swap space: succeeded Oct 18 15:02:59 linux2 init: Entering runlevel: 3 Oct 18 15:02:59 linux2 kudzu: Updating /etc/fstab succeeded Oct 18 15:03:14 linux2 kudzu: succeeded Oct 18 15:03:14 linux2 sysctl: net.ipv4.ip_forward = 0 Oct 18 15:03:14 linux2 sysctl: net.ipv4.conf.default.rp_filter = 1 Oct 18 15:03:14 linux2 sysctl: kernel.sysrq = 0 Oct 18 15:03:14 linux2 network: Setting network parameters: succeeded Oct 18 15:03:14 linux2 network: Bringing up interface lo: succeeded Oct 18 15:03:16 linux2 network: Bringing up interface eth0: succeeded Oct 18 15:03:20 linux2 netfs: Mounting NFS filesystems: succeeded Oct 18 15:03:21 linux2 netfs: Mounting other filesystems: succeeded Oct 18 15:03:21 linux2 ypbind: Setting NIS domain name corp.xtremespectrum.com: succeeded Oct 18 15:03:21 linux2 ypbind: ypbind startup succeeded Oct 18 15:03:21 linux2 ypbind: bound to NIS server xsdc01 Oct 18 15:03:21 linux2 automount[987]: starting automounter version 3.1.7, path = /home, maptype = yp, mapname = auto_home Oct 18 15:03:21 linux2 automount[989]: starting automounter version 3.1.7, path = /misc, maptype = file, mapname = /etc/auto.misc Oct 18 15:03:21 linux2 autofs: automount startup succeeded Oct 18 15:03:22 linux2 sshd: Starting sshd: Oct 18 15:03:22 linux2 automount[989]: using kernel protocol version 3 Oct 18 15:03:22 linux2 sshd: succeeded Oct 18 15:03:22 linux2 sshd[1013]: Server listening on 0.0.0.0 port 22. Oct 18 15:03:22 linux2 sshd: Oct 18 15:03:22 linux2 rc: Starting sshd: succeeded Oct 18 15:03:22 linux2 xinetd[1046]: chargen disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: chargen disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: daytime disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: daytime disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: echo disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: echo disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: finger disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: ntalk disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: rsync disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: sgi_fam disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: talk disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: telnet disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: time disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: time disabled, removing Oct 18 15:03:22 linux2 xinetd[1046]: xinetd Version 2.3.3 started with libwrap options compiled in. Oct 18 15:03:22 linux2 xinetd[1046]: Started working: 3 available services Oct 18 15:03:23 linux2 automount[987]: using kernel protocol version 3 Oct 18 15:03:25 linux2 xinetd: xinetd startup succeeded Oct 18 15:03:26 linux2 kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Oct 18 15:03:26 linux2 nfs: Starting NFS services: succeeded Oct 18 15:03:27 linux2 nfs: rpc.rquotad startup succeeded Oct 18 15:03:27 linux2 nfs: rpc.mountd startup succeeded Oct 18 15:03:27 linux2 nfs: rpc.nfsd startup succeeded Oct 18 15:03:28 linux2 sendmail: sendmail startup succeeded Oct 18 15:03:28 linux2 gpm: gpm startup succeeded Oct 18 15:03:28 linux2 crond: crond startup succeeded Oct 18 15:03:29 linux2 xfs: listening on port 7100 Oct 18 15:03:29 linux2 xfs: xfs startup succeeded Oct 18 15:03:29 linux2 anacron: anacron startup succeeded Oct 18 15:03:29 linux2 atd: atd startup succeeded Oct 18 15:03:29 linux2 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/cyrillic (unreadable) Oct 18 15:03:29 linux2 xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/local (unreadable) Oct 18 15:03:29 linux2 xfs: ignoring font path element /usr/share/AbiSuite/fonts (unreadable) Oct 18 15:39:09 linux2 login(pam_unix)[1322]: session opened for user root by LOGIN(uid=0) Oct 18 15:39:09 linux2 -- root[1322]: ROOT LOGIN ON tty1