From mboxrd@z Thu Jan 1 00:00:00 1970 From: Markus Schorer Subject: Re: ga-586dx on linux 2.4 Date: Wed, 23 Oct 2002 09:53:33 +0200 Sender: linux-smp-owner@vger.kernel.org Message-ID: <3DB6557D.2458908E@plain.de> References: <200210221844.30469.richard@nod.at> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: List-Id: Content-Type: text/plain; charset="iso-8859-1" To: linux-smp@vger.kernel.org hi, i have that same board (only with 2 166 no-MMX). i have had several issues with smp and noapic. as far as i remember, my last setup was quite stable. although i didn't use it as server. one problem i remember, usb and adaptec are on the same irq, the apic tries to "separate" wich never worked. so i had to hardcode the usb-interrupt. i would be interested in any solution you might find. bye, Richard Weinberger wrote: >=20 > hi, > i have a gigabyte 586dx dual pentium-board with 2 pentium-mmx 200mhz = cpu's. > when i run the board with linux 2.2.19 it works fine. > but when i run linux 2.4.18 on the board i get a lot apic-errors for = cpu0 and > cpu1. > after some time(<12h) crashes the system. > when i use the "noapic" boot-function i get no apic-errors but the sy= stem > crashes after a few days. >=20 > can i use the board only with kernel 2.2? > or knows somebody a solution for my problem. >=20 > thanks. > richard weinberger >=20 > - > To unsubscribe from this list: send the line "unsubscribe linux-smp" = in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html --=20 _ plain GmbH_______________________________________________________ markus schorer fon 089.540.149.0 daiserstrasse 15 RGB fax 089.540.149.44 81371 m=FCnchen http://www.plain.de