From: Robby Pedrica <pedrica@bigfoot.com>
To: linux-smp@vger.kernel.org
Subject: re. unexpected IO-APIC
Date: Wed, 20 Nov 2002 09:57:40 +0200 [thread overview]
Message-ID: <3DDB4074.6070000@bigfoot.com> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 756 bytes --]
Hi linux-smp,
Here are some details regarding my unexpected IO-APIC ( please see
attachements for dmesg, syslog and lspci ).
Gigabyte GA7-VAX
Athlon XP1900
Via KT400 northbridge
Via 8235 southbridge
Realtek 8100BL 10/100
Realtek AL650 Sound 6 x USB 2.0 ( through southbridge )
AGP 3/2 slot ( 8x/4x )
2 x ATA133 ports ( through southbridge )
My machine also has the following installed:
Creative DXR2 ( thats the auravision )
CMedia 8738 Sound Card
Aopen Geforce 4 MX440
1 x DDR333 512MB TwinMOS
1 x Quantum EL 5GB
1 x Seagate 20GB
1 x Creative DVD 5x
1 x Samsung 24/10/40 CDRW
Linux:
Slackware 9.0 Beta
Stock kernel 2.4.19
IO-APIC enabled in config
I hope this info helps
Regards
Robby
[-- Attachment #1.2: LSPCI.TXT --]
[-- Type: text/plain, Size: 7370 bytes --]
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189
Subsystem: Giga-byte Technology: Unknown device 5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 2.0
Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2,x4
Command: RQ=31 SBA- AGP- 64bit- FW- Rate=<none>
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8000000-e9ffffff
Prefetchable memory behind bridge: d8000000-e7ffffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0a.0 Multimedia video controller: Auravision VxP524
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=1M]
00:0c.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
Subsystem: C-Media Electronics Inc CMI8738/C3DX PCI Audio Device
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at d000 [size=256]
00:10.0 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 10
Region 4: I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. USB (rev 80) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 11
Region 4: I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin D routed to IRQ 5
Region 0: Memory at ea100000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233A ISA Bridge
Subsystem: Giga-byte Technology: Unknown device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 5002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 0
Region 4: I/O ports at e000 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at e400 [size=256]
Region 1: Memory at ea101000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX440] (rev a3) (prog-if 00 [VGA])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d8000000 (32-bit, prefetchable) [size=128M]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
[-- Attachment #1.3: DMESG.TXT --]
[-- Type: text/plain, Size: 6301 bytes --]
Linux version 2.4.19 (root@midas) (gcc version 3.2) #1 Sun Aug 18 13:24:13 PDT 2002
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
511MB LOWMEM available.
Advanced speculative caching feature present
On node 0 totalpages: 131056
zone(0): 4096 pages.
zone(1): 126960 pages.
zone(2): 0 pages.
Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=6464 rw root=/dev/ram SLACK_KERNEL=bare.i BOOT_IMAGE=/kernels root=/dev/hda3 noinitrd ro
Initializing CPU#0
Detected 1607.466 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3204.71 BogoMIPS
Memory: 512840k/524224k available (1577k kernel code, 10996k reserved, 570k data, 104k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0383fbff c1cbfbff 00000000, vendor = 2
Advanced speculative caching feature present
Disabling advanced speculative caching
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After vendor init, caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: After generic, caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: Common caps: 0383fbf7 c1cbfbff 00000000 00000000
CPU: AMD Athlon(tm) XP 1900+ stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf9cf0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router default [1106/3189] at 00:00.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
Journalled Block Device driver loaded
pty: 512 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 89
PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@ucw.cz>
hda: ST320413A, ATA DISK drive
hdb: QUANTUM FIREBALL EL5.1A, ATA DISK drive
hdc: SAMSUNG CD-R/RW DRIVE SW-224B, ATAPI CD/DVD-ROM drive
hdd: CREATIVEDVD5240E-1, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide0: probed IRQ 14 failed, using default.
ide1 at 0x170-0x177,0x376 on irq 15
ide1: probed IRQ 15 failed, using default.
hda: 39102336 sectors (20020 MB) w/512KiB Cache, CHS=2434/255/63
hdb: 10018890 sectors (5130 MB) w/418KiB Cache, CHS=623/255/63
hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.12
hdd: ATAPI 32X DVD-ROM drive, 512kB Cache
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 6464K size 1024 blocksize
loop: loaded (max 8 devices)
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
8regs : 2456.400 MB/sec
32regs : 1292.800 MB/sec
pIII_sse : 4413.200 MB/sec
pII_mmx : 3761.600 MB/sec
p5_mmx : 4799.200 MB/sec
raid5: using function: pIII_sse (4413.200 MB/sec)
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.3(19/02/2002)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 104k freed
Adding Swap: 530136k swap-space (priority -1)
EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,3), internal journal
NTFS driver v1.1.22 [Flags: R/O MODULE]
NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
8139too Fast Ethernet driver 0.9.25
eth0: RealTek RTL8139 Fast Ethernet at 0xe0865000, 00:20:ed:55:8c:d5, IRQ 11
eth0: Identified 8139 chip type 'RTL-8139C'
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
NVRM: AGPGART: unable to retrieve symbol table
[-- Attachment #1.4: SYSLOG.TXT --]
[-- Type: text/plain, Size: 11494 bytes --]
Nov 15 13:07:11 googly kernel: hm, page 000f5000 reserved twice.
Nov 15 13:07:11 googly kernel: hm, page 000f0000 reserved twice.
Nov 15 13:07:11 googly kernel: hm, page 000f1000 reserved twice.
Nov 15 13:07:11 googly kernel: On node 0 totalpages: 131056
Nov 15 13:07:11 googly kernel: zone(0): 4096 pages.
Nov 15 13:07:11 googly kernel: zone(1): 126960 pages.
Nov 15 13:07:12 googly kernel: zone(2): 0 pages.
Nov 15 13:07:12 googly kernel: Intel MultiProcessor Specification v1.4
Nov 15 13:07:12 googly kernel: Virtual Wire compatibility mode.
Nov 15 13:07:12 googly kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
Nov 15 13:07:12 googly kernel: Processor #0 Pentium(tm) Pro APIC version 17
Nov 15 13:07:12 googly kernel: I/O APIC #2 Version 17 at 0xFEC00000.
Nov 15 13:07:12 googly kernel: Processors: 1
Nov 15 13:07:13 googly kernel: Kernel command line: BOOT_IMAGE=slackrob ro root=303 hdc=ide-scsi
Nov 15 13:07:13 googly kernel: ide_setup: hdc=ide-scsi
Nov 15 13:07:13 googly kernel: Detected 1607.518 MHz processor.
Nov 15 13:07:13 googly kernel: Console: colour VGA+ 80x25
Nov 15 13:07:13 googly kernel: Calibrating delay loop... 3204.71 BogoMIPS
Nov 15 13:07:13 googly kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 15 13:07:14 googly kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 15 13:07:14 googly kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 15 13:07:14 googly kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 15 13:07:16 googly kernel: CPU: AMD Athlon(tm) XP 1900+ stepping 02
Nov 15 13:07:16 googly kernel: POSIX conformance testing by UNIFIX
Nov 15 13:07:16 googly kernel: enabled ExtINT on CPU#0
Nov 15 13:07:16 googly kernel: ESR value before enabling vector: 00000000
Nov 15 13:07:17 googly kernel: ESR value after enabling vector: 00000000
Nov 15 13:07:17 googly kernel: ENABLING IO-APIC IRQs
Nov 15 13:07:17 googly kernel: Setting 2 in the phys_id_present_map
Nov 15 13:07:18 googly kernel:
Nov 15 13:07:19 googly kernel: WARNING: unexpected IO-APIC, please mail
Nov 15 13:07:19 googly kernel: to linux-smp@vger.kernel.org
Nov 15 13:07:24 googly kernel: Using local APIC timer interrupts.
Nov 15 13:07:24 googly kernel: calibrating APIC timer ...
Nov 15 13:07:25 googly kernel: ..... CPU clock speed is 1607.5050 MHz.
Nov 15 13:07:25 googly kernel: ..... host bus clock speed is 267.9176 MHz.
Nov 15 13:07:25 googly kernel: cpu: 0, clocks: 2679176, slice: 1339588
Nov 15 13:07:25 googly kernel: CPU0<T0:2679168,T1:1339568,D:12,S:1339588,C:2679176>
Nov 15 13:07:25 googly kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 15 13:07:25 googly kernel: mtrr: detected mtrr type: Intel
Nov 15 13:07:26 googly kernel: Unknown bridge resource 0: assuming transparent
Nov 15 13:07:27 googly kernel: Initializing RT netlink socket
Nov 15 13:07:28 googly kernel: Starting kswapd
Nov 15 13:07:28 googly kernel: pty: 256 Unix98 ptys configured
Nov 15 13:07:29 googly kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 15 13:07:29 googly kernel: VP_IDE: IDE controller on PCI bus 00 dev 89
Nov 15 13:07:29 googly kernel: VP_IDE: chipset revision 6
Nov 15 13:07:29 googly kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 15 13:07:29 googly kernel: VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@ucw.cz>
Nov 15 13:07:29 googly kernel: hda: ST320413A, ATA DISK drive
Nov 15 13:07:30 googly kernel: hdb: QUANTUM FIREBALL EL5.1A, ATA DISK drive
Nov 15 13:07:30 googly kernel: hdc: SAMSUNG CD-R/RW DRIVE SW-224B, ATAPI CD/DVD-ROM drive
Nov 15 13:07:30 googly kernel: hdd: CREATIVEDVD5240E-1, ATAPI CD/DVD-ROM drive
Nov 15 13:07:30 googly kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 15 13:07:30 googly kernel: ide0: probed IRQ 14 failed, using default.
Nov 15 13:07:30 googly kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 15 13:07:30 googly kernel: ide1: probed IRQ 15 failed, using default.
Nov 15 13:07:31 googly kernel: hdd: ATAPI 32X DVD-ROM drive, 512kB Cache
Nov 15 13:07:32 googly kernel: agpgart: Unsupported Via chipset (device id: 3189), you might want to try agp_try_unsupported=1.
Nov 15 13:07:33 googly kernel: usb-uhci.c: Detected 2 ports
Nov 15 13:07:34 googly last message repeated 2 times
Nov 15 13:07:35 googly kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 15 13:07:36 googly kernel: NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
Nov 15 13:07:36 googly kernel: NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
Nov 15 13:07:36 googly kernel: Vendor: SAMSUNG Model: CD-R/RW SW-224B Rev: R205
Nov 15 13:07:37 googly kernel: Type: CD-ROM ANSI SCSI revision: 02
Nov 15 13:07:48 googly modprobe: modprobe: Can't locate module char-major-10-134
Nov 15 13:07:50 googly kernel: nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
Nov 15 13:08:02 googly modprobe: modprobe: Can't locate module agpgart
Nov 15 13:08:02 googly kernel: NVRM: AGPGART: unable to retrieve symbol table
Nov 15 13:08:29 googly modprobe: modprobe: Can't locate module sound-slot-1
Nov 15 13:08:29 googly modprobe: modprobe: Can't locate module sound-service-1-0
Nov 15 13:08:29 googly modprobe: modprobe: Can't locate module sound-slot-1
Nov 15 13:08:29 googly modprobe: modprobe: Can't locate module sound-service-1-0
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth1
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth2
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth3
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth4
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth5
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth6
Nov 15 13:10:44 googly modprobe: modprobe: Can't locate module eth7
Nov 15 13:12:38 googly modprobe: modprobe: Can't locate module sound-slot-0
Nov 15 13:12:38 googly modprobe: modprobe: Can't locate module sound-service-0-6
Nov 15 13:16:55 googly modprobe: modprobe: Can't locate module char-major-10-135
Nov 19 21:59:25 googly kernel: Linux version 2.4.19 (root@midas) (gcc version 3.2) #1 Sun Aug 18 13:24:13 PDT 2002
Nov 19 21:59:25 googly kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Nov 19 21:59:25 googly kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Nov 19 21:59:25 googly kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Nov 19 21:59:25 googly kernel: BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Nov 19 21:59:25 googly kernel: BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
Nov 19 21:59:25 googly kernel: BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
Nov 19 21:59:25 googly kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Nov 19 21:59:25 googly kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Nov 19 21:59:25 googly kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Nov 19 21:59:26 googly kernel: On node 0 totalpages: 131056
Nov 19 21:59:26 googly kernel: zone(0): 4096 pages.
Nov 19 21:59:26 googly kernel: zone(1): 126960 pages.
Nov 19 21:59:26 googly kernel: zone(2): 0 pages.
Nov 19 21:59:26 googly kernel: Kernel command line: initrd=initrd.img load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=6464 rw root=/dev/ram SLACK_KERNEL=bare.i BOOT_IMAGE=/kernels root=/dev/hda3 noinitrd ro
Nov 19 21:59:27 googly kernel: Detected 1607.466 MHz processor.
Nov 19 21:59:27 googly kernel: Console: colour VGA+ 80x25
Nov 19 21:59:27 googly kernel: Calibrating delay loop... 3204.71 BogoMIPS
Nov 19 21:59:27 googly kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Nov 19 21:59:28 googly kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Nov 19 21:59:28 googly kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Nov 19 21:59:28 googly kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Nov 19 21:59:29 googly kernel: CPU: AMD Athlon(tm) XP 1900+ stepping 02
Nov 19 21:59:30 googly kernel: POSIX conformance testing by UNIFIX
Nov 19 21:59:30 googly kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Nov 19 21:59:30 googly kernel: mtrr: detected mtrr type: Intel
Nov 19 21:59:31 googly kernel: Unknown bridge resource 0: assuming transparent
Nov 19 21:59:31 googly kernel: Initializing RT netlink socket
Nov 19 21:59:31 googly kernel: Starting kswapd
Nov 19 21:59:32 googly kernel: pty: 512 Unix98 ptys configured
Nov 19 21:59:33 googly kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 19 21:59:33 googly kernel: VP_IDE: IDE controller on PCI bus 00 dev 89
Nov 19 21:59:33 googly kernel: PCI: No IRQ known for interrupt pin A of device 00:11.1. Please try using pci=biosirq.
Nov 19 21:59:33 googly kernel: VP_IDE: chipset revision 6
Nov 19 21:59:33 googly kernel: VP_IDE: not 100%% native mode: will probe irqs later
Nov 19 21:59:33 googly kernel: VP_IDE: Unknown VIA SouthBridge, contact Vojtech Pavlik <vojtech@ucw.cz>
Nov 19 21:59:33 googly kernel: hda: ST320413A, ATA DISK drive
Nov 19 21:59:34 googly kernel: hdb: QUANTUM FIREBALL EL5.1A, ATA DISK drive
Nov 19 21:59:34 googly kernel: hdc: SAMSUNG CD-R/RW DRIVE SW-224B, ATAPI CD/DVD-ROM drive
Nov 19 21:59:34 googly kernel: hdd: CREATIVEDVD5240E-1, ATAPI CD/DVD-ROM drive
Nov 19 21:59:34 googly kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 19 21:59:34 googly kernel: ide0: probed IRQ 14 failed, using default.
Nov 19 21:59:34 googly kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 19 21:59:34 googly kernel: ide1: probed IRQ 15 failed, using default.
Nov 19 21:59:35 googly kernel: hdc: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Nov 19 21:59:35 googly kernel: hdd: ATAPI 32X DVD-ROM drive, 512kB Cache
Nov 19 21:59:35 googly kernel: ide-floppy driver 0.99.newide
Nov 19 21:59:36 googly kernel: RAMDISK driver initialized: 16 RAM disks of 6464K size 1024 blocksize
Nov 19 21:59:36 googly kernel: ide-floppy driver 0.99.newide
Nov 19 21:59:36 googly kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Nov 19 21:59:36 googly last message repeated 2 times
Nov 19 21:59:37 googly kernel: 8regs : 2456.400 MB/sec
Nov 19 21:59:37 googly kernel: 32regs : 1292.800 MB/sec
Nov 19 21:59:37 googly kernel: pIII_sse : 4413.200 MB/sec
Nov 19 21:59:38 googly kernel: pII_mmx : 3761.600 MB/sec
Nov 19 21:59:38 googly kernel: p5_mmx : 4799.200 MB/sec
Nov 19 21:59:38 googly kernel: raid5: using function: pIII_sse (4413.200 MB/sec)
Nov 19 21:59:39 googly kernel: VFS: Mounted root (ext3 filesystem) readonly.
Nov 19 21:59:40 googly kernel: NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
Nov 19 21:59:40 googly kernel: NTFS: Warning! NTFS volume version is Win2k+: Mounting read-only
Nov 19 21:59:53 googly modprobe: modprobe: Can't locate module char-major-10-134
Nov 19 21:59:55 googly kernel: nvidia: loading NVIDIA Linux x86 NVdriver Kernel Module 1.0-3123 Tue Aug 27 15:56:48 PDT 2002
Nov 19 22:00:08 googly modprobe: modprobe: Can't locate module agpgart
Nov 19 22:00:08 googly kernel: NVRM: AGPGART: unable to retrieve symbol table
Nov 19 22:00:34 googly modprobe: modprobe: Can't locate module char-major-14
Nov 19 22:00:35 googly last message repeated 4 times
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3249 bytes --]
reply other threads:[~2002-11-20 7:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DDB4074.6070000@bigfoot.com \
--to=pedrica@bigfoot.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox