From: Craig Anderson <craiga@unminc.com>
To: linux-smp@vger.kernel.org
Subject: WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org
Date: Thu, 21 Nov 2002 18:49:58 -0800 [thread overview]
Message-ID: <3DDD9B56.6C3B5DFB@unminc.com> (raw)
Hello Kernel Gods,
I have a riddle for you all. I have a 2-processor machine that
thinks
it has 4 processors but looks to be using only 1 (I only get 1
processors
worth of performance out of it). Here is the messages file entries.
Included is the following message:
WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org
This is a straight-from-the-CD RedHat 7.2 system. Following the
messages file output is some output from the dmesg command.
Any and all suggestions would be GREATLY appreciated,
Craig Anderson
408-327-1328 (office)
Nov 21 16:49:15 s4 syslogd 1.4.1: restart.
Nov 21 16:49:15 s4 syslog: syslogd startup succeeded
Nov 21 16:49:15 s4 kernel: klogd 1.4.1, log source = /proc/kmsg started.
Nov 21 16:49:15 s4 kernel: Inspecting /boot/System.map-2.4.7-10smp
Nov 21 16:49:15 s4 syslog: klogd startup succeeded
Nov 21 16:49:15 s4 kernel: Loaded 15627 symbols from
/boot/System.map-2.4.7-10smp.
Nov 21 16:49:15 s4 kernel: Symbols match kernel version 2.4.7.
Nov 21 16:49:15 s4 kernel: Loaded 180 symbols from 5 modules.
Nov 21 16:49:15 s4 kernel: Linux version 2.4.7-10smp
(bhcompile@stripples.devel.redhat.com) (gcc version 2.96 20000731 (Red
Hat Linux 7.1 2.96-98)) #1 SMP Thu Sep 6 17:09:31 EDT 2001
Nov 21 16:49:15 s4 kernel: BIOS-provided physical RAM map:
Nov 21 16:49:15 s4 kernel: BIOS-e820: 0000000000000000 -
000000000009f800 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 000000000009f800 -
00000000000a0000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000000d8000 -
00000000000e0000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000000e4000 -
0000000000100000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 0000000000100000 -
00000000f7ef0000 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7ef0000 -
00000000f7efc000 (ACPI data)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7efc000 -
00000000f7f00000 (ACPI NVS)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7f00000 -
00000000f7f80000 (usable)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000f7f80000 -
00000000f8000000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000fec00000 -
00000000fec10000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)
Nov 21 16:49:15 s4 kernel: BIOS-e820: 00000000ff800000 -
00000000ffc00000 (reserved)
Nov 21 16:49:15 s4 portmap: portmap startup succeeded
Nov 21 16:49:16 s4 kernel: BIOS-e820: 00000000fff00000 -
0000000100000000 (reserved)
Nov 21 16:49:16 s4 kernel: Scanning bios EBDA for MXT signature
Nov 21 16:49:16 s4 kernel: 3071MB HIGHMEM available.
Nov 21 16:49:16 s4 kernel: found SMP MP-table at 000f6710
Nov 21 16:49:16 s4 kernel: hm, page 000f6000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 000f7000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 0009f000 reserved twice.
Nov 21 16:49:16 s4 kernel: hm, page 000a0000 reserved twice.
Nov 21 16:49:16 s4 kernel: On node 0 totalpages: 1015680
Nov 21 16:49:16 s4 kernel: zone(0): 4096 pages.
Nov 21 16:49:16 s4 kernel: zone(1): 225280 pages.
Nov 21 16:49:16 s4 kernel: zone(2): 786304 pages.
Nov 21 16:49:16 s4 kernel: Intel MultiProcessor Specification v1.4
Nov 21 16:49:16 s4 kernel: Virtual Wire compatibility mode.
Nov 21 16:49:16 s4 kernel: OEM ID: Product ID: Kings Canyon APIC at:
0xFEE00000
Nov 21 16:49:16 s4 kernel: Processor #0 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #6 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #1 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: Processor #7 Unknown CPU [15:2] APIC version
20
Nov 21 16:49:16 s4 kernel: I/O APIC #2 Version 32 at 0xFEC00000.
Nov 21 16:49:16 s4 kernel: I/O APIC #3 Version 32 at 0xFEC80000.
Nov 21 16:49:16 s4 kernel: I/O APIC #4 Version 32 at 0xFEC80400.
Nov 21 16:49:16 s4 kernel: I/O APIC #5 Version 32 at 0xFEC81000.
Nov 21 16:49:16 s4 rpc.statd[716]: Version 0.3.1 Starting
Nov 21 16:49:16 s4 kernel: I/O APIC #8 Version 32 at 0xFEC81400.
Nov 21 16:49:16 s4 nfslock: rpc.statd startup succeeded
Nov 21 16:49:16 s4 kernel: Processors: 4
Nov 21 16:49:16 s4 kernel: Kernel command line: ro root=/dev/hda1
Nov 21 16:49:16 s4 kernel: Initializing CPU#0
Nov 21 16:49:16 s4 kernel: Detected 798.659 MHz processor.
Nov 21 16:49:16 s4 kernel: Console: colour VGA+ 80x25
Nov 21 16:49:16 s4 kernel: Calibrating delay loop... 1592.52 BogoMIPS
Nov 21 16:49:17 s4 kernel: Memory: 3989736k/4062720k available (1396k
kernel code, 70484k reserved, 102k data, 240k init, 3145152k highmem)
Nov 21 16:49:17 s4 kernel: Dentry-cache hash table entries: 524288
(order: 10, 4194304 bytes)
Nov 21 16:49:17 s4 kernel: Inode-cache hash table entries: 262144
(order: 9, 2097152 bytes)
Nov 21 16:49:17 s4 kernel: Mount-cache hash table entries: 65536 (order:
7, 524288 bytes)
Nov 21 16:49:17 s4 kernel: Buffer-cache hash table entries: 262144
(order: 8, 1048576 bytes)
Nov 21 16:49:17 s4 kernel: Page-cache hash table entries: 524288 (order:
10, 4194304 bytes)
Nov 21 16:49:17 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:17 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:17 s4 kernel: Intel machine check architecture supported.
Nov 21 16:49:17 s4 keytable: Loading keymap: succeeded
Nov 21 16:49:17 s4 kernel: Intel machine check reporting enabled on
CPU#0.
Nov 21 16:49:17 s4 kernel: Enabling fast FPU save and restore... done.
Nov 21 16:49:17 s4 kernel: Enabling unmasked SIMD FPU exception
support... done.Nov 21 16:49:17 s4 kernel: Checking 'hlt' instruction...
OK.
Nov 21 16:49:17 s4 kernel: POSIX conformance testing by UNIFIX
Nov 21 16:49:17 s4 kernel: mtrr: v1.40 (20010327) Richard Gooch
(rgooch@atnf.csiro.au)
Nov 21 16:48:41 s4 rc.sysinit: Mounting proc filesystem: succeeded
Nov 21 16:49:17 s4 kernel: mtrr: detected mtrr type: Intel
Nov 21 16:49:17 s4 keytable: Loading system font: succeeded
Nov 21 16:48:41 s4 rc.sysinit: Unmounting initrd: succeeded
Nov 21 16:48:41 s4 sysctl: net.ipv4.ip_forward = 0
Nov 21 16:48:41 s4 sysctl: net.ipv4.conf.default.rp_filter = 1
Nov 21 16:48:41 s4 sysctl: kernel.sysrq = 0
Nov 21 16:49:17 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:48:41 s4 rc.sysinit: Configuring kernel parameters: succeeded
Nov 21 16:49:17 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:48:41 s4 date: Thu Nov 21 16:48:34 PST 2002
Nov 21 16:49:17 s4 kernel: Intel machine check reporting enabled on
CPU#0.
Nov 21 16:48:41 s4 rc.sysinit: Setting clock (localtime): Thu Nov 21
16:48:34 PST 2002 succeeded
Nov 21 16:48:41 s4 rc.sysinit: Loading default keymap succeeded
Nov 21 16:48:41 s4 rc.sysinit: Setting default font (lat0-sun16):
succeeded
Nov 21 16:48:41 s4 rc.sysinit: Activating swap partitions: succeeded
Nov 21 16:49:17 s4 kernel: CPU0: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:48:41 s4 rc.sysinit: Setting hostname s4: succeeded
Nov 21 16:49:17 s4 kernel: per-CPU timeslice cutoff: 1462.29 usecs.
Nov 21 16:48:41 s4 rc.sysinit: Mounting USB filesystem: succeeded
Nov 21 16:49:17 s4 random: Initializing random number generator:
succeeded
Nov 21 16:49:17 s4 kernel: enabled ExtINT on CPU#0
Nov 21 16:48:41 s4 rc.sysinit: Initializing USB controller (usb-uhci):
succeeded
Nov 21 16:48:41 s4 fsck: /: clean, 74844/640000 files, 310391/1279167
blocks
Nov 21 16:49:18 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:48:41 s4 rc.sysinit: Checking root filesystem succeeded
Nov 21 16:49:18 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:48:41 s4 rc.sysinit: Remounting root filesystem in read-write
mode: succeeded
Nov 21 16:49:18 s4 kernel: Booting processor 1/1 eip 2000
Nov 21 16:48:53 s4 rc.sysinit: Finding module dependencies: succeeded
Nov 21 16:49:18 s4 kernel: Initializing CPU#1
Nov 21 16:48:54 s4 fsck: /export/home: clean, 15/8880128 files,
338466/17733751
blocks
Nov 21 16:49:18 s4 kernel: masked ExtINT on CPU#1
Nov 21 16:48:54 s4 rc.sysinit: Checking filesystems succeeded
Nov 21 16:49:18 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:48:54 s4 rc.sysinit: Mounting local filesystems: succeeded
Nov 21 16:49:18 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:48:54 s4 rc.sysinit: Enabling local filesystem quotas:
succeeded
Nov 21 16:49:18 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:48:55 s4 rc.sysinit: Enabling swap space: succeeded
Nov 21 16:48:58 s4 init: Entering runlevel: 5
Nov 21 16:49:18 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:48:59 s4 kudzu: Updating /etc/fstab succeeded
Nov 21 16:49:18 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:11 s4 kudzu: succeeded
Nov 21 16:49:18 s4 kernel: Intel machine check reporting enabled on
CPU#1.
Nov 21 16:49:11 s4 sysctl: net.ipv4.ip_forward = 0
Nov 21 16:49:11 s4 sysctl: net.ipv4.conf.default.rp_filter = 1
Nov 21 16:49:11 s4 sysctl: kernel.sysrq = 0
Nov 21 16:49:11 s4 network: Setting network parameters: succeeded
Nov 21 16:49:19 s4 kernel: CPU1: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:12 s4 network: Bringing up interface lo: succeeded
Nov 21 16:49:19 s4 kernel: Booting processor 2/6 eip 2000
Nov 21 16:49:19 s4 netfs: Mounting other filesystems: succeeded
Nov 21 16:49:14 s4 network: Bringing up interface eth0: succeeded
Nov 21 16:49:19 s4 kernel: Initializing CPU#2
Nov 21 16:49:19 s4 kernel: masked ExtINT on CPU#2
Nov 21 16:49:19 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:49:19 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:19 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:19 s4 kernel: Intel machine check reporting enabled on
CPU#2.
Nov 21 16:49:19 s4 kernel: CPU2: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:19 s4 kernel: Booting processor 3/7 eip 2000
Nov 21 16:49:19 s4 kernel: Initializing CPU#3
Nov 21 16:49:19 s4 kernel: masked ExtINT on CPU#3
Nov 21 16:49:19 s4 kernel: ESR value before enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: ESR value after enabling vector: 00000000
Nov 21 16:49:19 s4 kernel: Calibrating delay loop... 1595.80 BogoMIPS
Nov 21 16:49:19 s4 kernel: CPU: L1 I cache: 12K, L1 D cache: 8K
Nov 21 16:49:19 s4 kernel: CPU: L2 cache: 512K
Nov 21 16:49:19 s4 kernel: Intel machine check reporting enabled on
CPU#3.
Nov 21 16:49:19 s4 kernel: CPU3: Intel(R) XEON(TM) CPU 2.40GHz stepping
04
Nov 21 16:49:19 s4 kernel: Total of 4 processors activated (6379.92
BogoMIPS).
Nov 21 16:49:19 s4 kernel: ENABLING IO-APIC IRQs
Nov 21 16:49:19 s4 kernel: ...changing IO-APIC physical APIC ID to 2 ...
ok.
Nov 21 16:49:20 s4 ntpd[832]: ntpd 4.1.0 Wed Sep 5 06:54:30 EDT 2001
(1)
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 3 ...
ok.
Nov 21 16:49:20 s4 ntpd: ntpd startup succeeded
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 4 ...
ok.
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 5 ...
ok.
Nov 21 16:49:20 s4 kernel: ...changing IO-APIC physical APIC ID to 8 ...
ok.
Nov 21 16:49:20 s4 ntpd[832]: precision = 8 usec
Nov 21 16:49:20 s4 kernel: ..TIMER: vector=0x31 pin1=2 pin2=0
Nov 21 16:49:20 s4 ntpd[832]: kernel time discipline status 0040
Nov 21 16:49:20 s4 ntpd[832]: getnetnum: "idns" invalid host number,
line ignored
Nov 21 16:49:20 s4 ntpd[832]: frequency initialized -74.522 from
/etc/ntp/drift
Nov 21 16:49:20 s4 ntpd[832]: bind() fd 9, family 2, port 123, addr
224.0.1.1, in_classd=1 flags=0 fails: Address already in use
Nov 21 16:49:20 s4 ntpd[832]: ...multicast address 224.0.1.1 using
wildcard socket
Nov 21 16:49:20 s4 kernel: testing the IO APIC.......................
Nov 21 16:49:20 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 ypbind: ypbind startup succeeded
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 ypbind: bound to NIS server unmsrvr.unminc.com
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel:
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:21 s4 kernel: WARNING: unexpected IO-APIC, please mail
Nov 21 16:49:21 s4 kernel: to linux-smp@vger.kernel.org
Nov 21 16:49:22 s4 kernel: .................................... done.
Nov 21 16:49:22 s4 kernel: Using local APIC timer interrupts.
Nov 21 16:49:22 s4 kernel: calibrating APIC timer ...
Nov 21 16:49:22 s4 kernel: ..... CPU clock speed is 798.6734 MHz.
Nov 21 16:49:22 s4 kernel: ..... host bus clock speed is 99.8339 MHz.
Nov 21 16:49:22 s4 kernel: cpu: 0, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel:
CPU0<T0:998336,T1:798624,D:45,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel: cpu: 1, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel: cpu: 3, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel: cpu: 2, clocks: 998339, slice: 199667
Nov 21 16:49:22 s4 kernel:
CPU2<T0:998336,T1:399328,D:7,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel:
CPU3<T0:998336,T1:199664,D:4,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel:
CPU1<T0:998336,T1:598976,D:26,S:199667,C:998339>
Nov 21 16:49:22 s4 kernel: checking TSC synchronization across CPUs:
passed.
Nov 21 16:49:22 s4 kernel: PCI: PCI BIOS revision 2.10 entry at 0xfd885,
last bus=7
Nov 21 16:49:22 s4 kernel: PCI: Using configuration type 1
Nov 21 16:49:22 s4 kernel: PCI: Probing PCI hardware
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 0: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 1: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: Unknown bridge resource 2: assuming
transparent
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 10 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 11 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Discovered primary peer bus 12 [IRQ]
Nov 21 16:49:22 s4 kernel: PCI: Using IRQ router PIIX [8086/2480] at
00:1f.0
Nov 21 16:49:22 s4 automount[942]: starting automounter version 3.1.7,
path = /cvs, maptype = yp, mapname = auto.cvs
Nov 21 16:49:22 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P0) -> 16
Nov 21 16:49:22 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P1) -> 19
Nov 21 16:49:23 s4 automount[946]: starting automounter version 3.1.7,
path = /home, maptype = yp, mapname = auto.home
Nov 21 16:49:23 s4 autofs: automount startup succeeded
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B0,I29,P2) -> 18
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I1,P0) -> 16
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I2,P0) -> 17
Nov 21 16:49:23 s4 kernel: PCI->APIC IRQ transform: (B7,I3,P0) -> 18
Nov 21 16:49:23 s4 automount[942]: using kernel protocol version 3
Nov 21 16:49:23 s4 kernel: isapnp: Scanning for PnP cards...
Nov 21 16:49:24 s4 automount[946]: using kernel protocol version 3
Nov 21 16:49:24 s4 snmpd: snmpd startup succeeded
Nov 21 16:49:24 s4 kernel: isapnp: No Plug & Play device found
Nov 21 16:49:24 s4 kernel: Linux NET4.0 for Linux 2.4
Nov 21 16:49:24 s4 kernel: Based upon Swansea University Computer
Society NET3.039
Nov 21 16:49:24 s4 kernel: Initializing RT netlink socket
Nov 21 16:49:24 s4 kernel: Simple Boot Flag extension found and enabled.
Nov 21 16:49:24 s4 kernel: apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.14)
Nov 21 16:49:24 s4 kernel: apm: disabled - APM is not SMP safe.
Nov 21 16:49:24 s4 kernel: mxt_scan_bios: enter
Nov 21 16:49:24 s4 kernel: Starting kswapd v1.8
Nov 21 16:49:24 s4 kernel: allocated 64 pages and 64 bhs reserved for
the highmem bounces
Nov 21 16:49:24 s4 sshd: Starting sshd:
Nov 21 16:49:24 s4 kernel: VFS: Diskquotas version dquot_6.5.0
initialized
Nov 21 16:49:25 s4 kernel: pty: 2048 Unix98 ptys configured
Nov 21 16:49:25 s4 kernel: Serial driver version 5.05c (2001-07-08) with
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
Nov 21 16:49:25 s4 kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Nov 21 16:49:25 s4 kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Nov 21 16:49:25 s4 kernel: Real Time Clock Driver v1.10d
Nov 21 16:49:25 s4 sshd: succeeded
Nov 21 16:49:25 s4 kernel: block: queued sectors max/low
2651538kB/2520466kB, 7808 slots per queue
Nov 21 16:49:26 s4 sshd: ^[[60G
Nov 21 16:49:26 s4 kernel: RAMDISK driver initialized: 16 RAM disks of
4096K size 1024 blocksize
Nov 21 16:49:26 s4 kernel: Uniform Multi-Platform E-IDE driver Revision:
6.31
Nov 21 16:49:26 s4 sshd:
Nov 21 16:49:26 s4 kernel: ide: Assuming 33MHz PCI bus speed for PIO
modes; override with idebus=xx
Nov 21 16:49:26 s4 kernel: PCI_IDE: unknown IDE controller on PCI bus 00
device
f9, VID=8086, DID=248b
Nov 21 16:49:26 s4 kernel: PCI: Device 00:1f.1 not available because of
resource collisions
Nov 21 16:49:26 s4 kernel: PCI_IDE: chipset revision 2
Nov 21 16:49:26 s4 kernel: PCI_IDE: not 100%% native mode: will probe
irqs laterNov 21 16:49:26 s4 kernel: ide0: BM-DMA at 0x1460-0x1467,
BIOS settings: hda:pio, hdb:pio
Nov 21 16:49:26 s4 rc: Starting sshd: succeeded
Nov 21 16:49:26 s4 kernel: ide1: BM-DMA at 0x1468-0x146f, BIOS
settings: hdc:pio, hdd:pio
Nov 21 16:49:26 s4 kernel: hda: ST380021A, ATA DISK drive
Nov 21 16:49:26 s4 kernel: hdc: _NEC CD-ROM CD-3002A, ATAPI CD/DVD-ROM
drive
Nov 21 16:49:26 s4 kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Nov 21 16:49:26 s4 kernel: ide1 at 0x170-0x177,0x376 on irq 15
Nov 21 16:49:26 s4 kernel: hda: 156301488 sectors (80026 MB) w/2048KiB
Cache, CHS=9729/255/63
Nov 21 16:49:26 s4 kernel: ide-floppy driver 0.97
Nov 21 16:49:26 s4 kernel: Partition check:
Nov 21 16:49:26 s4 kernel: hda: hda1 hda2 hda3
Nov 21 16:49:26 s4 kernel: Floppy drive(s): fd0 is 1.44M
Nov 21 16:49:26 s4 kernel: FDC 0 is a post-1991 82077
Nov 21 16:49:26 s4 kernel: ide-floppy driver 0.97
Nov 21 16:49:27 s4 ucd-snmp[969]: UCD-SNMP version 4.2.1
Nov 21 16:49:27 s4 kernel: md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27
Nov 21 16:49:27 s4 kernel: md: Autodetecting RAID arrays.
Nov 21 16:49:27 s4 kernel: md: autorun ...
Nov 21 16:49:27 s4 kernel: md: ... autorun DONE.
Nov 21 16:49:27 s4 kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Nov 21 16:49:27 s4 kernel: IP Protocols: ICMP, UDP, TCP, IGMP
Nov 21 16:49:27 s4 kernel: IP: routing cache hash table of 32768
buckets, 256Kbytes
Nov 21 16:49:27 s4 kernel: TCP: Hash tables configured (established
524288 bind
65536)
Nov 21 16:49:27 s4 kernel: Linux IP multicast router 0.06 plus PIM-SM
Nov 21 16:49:27 s4 kernel: NET4: Unix domain sockets 1.0/SMP for Linux
NET4.0.
Nov 21 16:49:27 s4 kernel: RAMDISK: Compressed image found at block 0
Nov 21 16:49:27 s4 kernel: Freeing initrd memory: 323k freed
Nov 21 16:49:27 s4 kernel: VFS: Mounted root (ext2 filesystem).
Nov 21 16:49:27 s4 kernel: Journalled Block Device driver loaded
Nov 21 16:49:27 s4 kernel: kjournald starting. Commit interval 5
seconds
Nov 21 16:49:27 s4 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Nov 21 16:49:27 s4 kernel: Freeing unused kernel memory: 240k freed
Nov 21 16:49:27 s4 kernel: Adding Swap: 2096472k swap-space (priority
-1)
Nov 21 16:49:27 s4 kernel: usb.c: registered new driver usbdevfs
Nov 21 16:49:27 s4 kernel: usb.c: registered new driver hub
Nov 21 16:49:27 s4 xinetd[1022]: chargen disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: $Revision: 1.259 $ time 17:18:11
Sep 6 2001
Nov 21 16:49:27 s4 xinetd[1022]: chargen disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: High bandwidth mode enabled
Nov 21 16:49:27 s4 xinetd[1022]: daytime disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.0
to 64
Nov 21 16:49:27 s4 xinetd[1022]: daytime disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1400, IRQ 16
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 xinetd[1022]: echo disabled, removing
Nov 21 16:49:27 s4 xinetd[1022]: echo disabled, removing
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 1
Nov 21 16:49:27 s4 xinetd[1022]: finger disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 xinetd[1022]: ntalk disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 xinetd[1022]: exec disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.1
to 64
Nov 21 16:49:27 s4 xinetd[1022]: login disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1420, IRQ 19
Nov 21 16:49:27 s4 xinetd[1022]: shell disabled, removing
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 xinetd[1022]: rsync disabled, removing
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 2
Nov 21 16:49:27 s4 xinetd[1022]: talk disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 xinetd[1022]: time disabled, removing
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 xinetd[1022]: time disabled, removing
Nov 21 16:49:27 s4 kernel: PCI: Setting latency timer of device 00:1d.2
to 64
Nov 21 16:49:27 s4 kernel: usb-uhci.c: USB UHCI at I/O 0x1440, IRQ 18
Nov 21 16:49:27 s4 kernel: usb-uhci.c: Detected 2 ports
Nov 21 16:49:27 s4 kernel: usb.c: new USB bus registered, assigned bus
number 3
Nov 21 16:49:27 s4 kernel: hub.c: USB hub found
Nov 21 16:49:27 s4 kernel: hub.c: 2 ports detected
Nov 21 16:49:27 s4 kernel: usb-uhci.c: v1.251:USB Universal Host
Controller Interface driver
Nov 21 16:49:27 s4 kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,1),
internal journal
Nov 21 16:49:27 s4 kernel: kjournald starting. Commit interval 5
seconds
Nov 21 16:49:28 s4 kernel: EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,3),
internal journal
Nov 21 16:49:28 s4 kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Nov 21 16:49:28 s4 kernel: 0x378: FIFO is 16 bytes
Nov 21 16:49:28 s4 kernel: 0x378: writeIntrThreshold is 9
Nov 21 16:49:28 s4 kernel: 0x378: readIntrThreshold is 9
Nov 21 16:49:28 s4 kernel: parport0: PC-style at 0x378 (0x778)
[PCSPP,TRISTATE,COMPAT,EPP,ECP]
Nov 21 16:49:28 s4 kernel: parport0: irq 7 detected
Nov 21 16:49:28 s4 kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html
Nov 21 16:49:28 s4 kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by
Andrey V. Savochkin <saw@saw.sw.com.sg> and others
Nov 21 16:49:28 s4 kernel: eth0: OEM i82557/i82558 10/100 Ethernet,
00:30:48:23:06:96, IRQ 17.
Nov 21 16:49:28 s4 kernel: Board assembly 000000-000, Physical
connectors present: RJ45
Nov 21 16:49:28 s4 kernel: Primary interface chip i82555 PHY #1.
Nov 21 16:49:28 s4 kernel: General self-test: passed.
Nov 21 16:49:28 s4 kernel: Serial sub-system self-test: passed.
Nov 21 16:49:28 s4 kernel: Internal registers self-test: passed.
Nov 21 16:49:28 s4 kernel: ROM checksum self-test: passed
(0xb874c1d3).
Nov 21 16:49:28 s4 kernel: eth1: OEM i82557/i82558 10/100 Ethernet,
00:30:48:23:06:97, IRQ 18.
Nov 21 16:49:28 s4 kernel: Board assembly 000000-000, Physical
connectors present: RJ45
Nov 21 16:49:28 s4 kernel: Primary interface chip i82555 PHY #1.
Nov 21 16:49:28 s4 kernel: General self-test: passed.
Nov 21 16:49:28 s4 kernel: Serial sub-system self-test: passed.
Nov 21 16:49:28 s4 kernel: Internal registers self-test: passed.
Nov 21 16:49:28 s4 kernel: ROM checksum self-test: passed
(0xb874c1d3).
Nov 21 16:49:28 s4 xinetd[1022]: xinetd Version 2.3.3 started with
libwrap options compiled in.
Nov 21 16:49:28 s4 xinetd[1022]: Started working: 2 available services
Nov 21 16:49:30 s4 xinetd: xinetd startup succeeded
Nov 21 16:49:32 s4 lpd: lpd startup succeeded
Nov 21 16:49:34 s4 sendmail: sendmail startup succeeded
Nov 21 16:49:34 s4 gpm: gpm startup succeeded
Nov 21 16:49:35 s4 crond: crond startup succeeded
Nov 21 16:49:36 s4 xfs: xfs startup succeeded
Nov 21 16:49:36 s4 xfs: listening on port 7100
Nov 21 16:49:36 s4 vncserver: Starting VNC server:
Nov 21 16:49:36 s4 vncserver: vncserver startup succeeded
Nov 21 16:49:36 s4 vncserver:
Nov 21 16:49:36 s4 rc: Starting vncserver: succeeded
Nov 21 16:49:37 s4 anacron: anacron startup succeeded
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/X11R6/lib/X11/fonts/local (unreadable)
Nov 21 16:49:37 s4 xfs: ignoring font path element
/usr/share/AbiSuite/fonts (unreadable)
Nov 21 16:49:37 s4 atd: atd startup succeeded
Nov 21 16:49:42 s4 kernel: mtrr: type mismatch for fd000000,800000 old:
uncachable new: write-combining
The dmesg command:
NG: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 00000000
....... : arbitration: 00
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 00F 0F 0 0 0 0 0 1 1 39
02 00F 0F 0 0 0 0 0 1 1 31
03 00F 0F 0 0 0 0 0 1 1 41
04 00F 0F 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 00F 0F 0 0 0 0 0 1 1 51
07 00F 0F 0 0 0 0 0 1 1 59
08 00F 0F 0 0 0 0 0 1 1 61
09 00F 0F 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 00F 0F 0 0 0 0 0 1 1 71
0d 00F 0F 0 0 0 0 0 1 1 79
0e 00F 0F 0 0 0 0 0 1 1 81
0f 00F 0F 0 0 0 0 0 1 1 89
10 00F 0F 1 1 0 1 0 1 1 91
11 00F 0F 1 1 0 1 0 1 1 99
12 00F 0F 1 1 0 1 0 1 1 A1
13 00F 0F 1 1 0 1 0 1 1 A9
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #3......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #4......
.... register #00: 04000000
....... : physical APIC id: 04
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 04000000
....... : arbitration: 04
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #5......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IO APIC #8......
.... register #00: 08000000
....... : physical APIC id: 08
.... register #01: 00178020
....... : max redirection entries: 0017
....... : IO APIC version: 0020
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
WARNING: unexpected IO-APIC, please mail
to linux-smp@vger.kernel.org
.... register #02: 08000000
....... : arbitration: 08
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 000 00 1 0 0 0 0 0 0 00
02 000 00 1 0 0 0 0 0 0 00
03 000 00 1 0 0 0 0 0 0 00
04 000 00 1 0 0 0 0 0 0 00
05 000 00 1 0 0 0 0 0 0 00
06 000 00 1 0 0 0 0 0 0 00
07 000 00 1 0 0 0 0 0 0 00
08 000 00 1 0 0 0 0 0 0 00
09 000 00 1 0 0 0 0 0 0 00
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 000 00 1 0 0 0 0 0 0 00
0d 000 00 1 0 0 0 0 0 0 00
0e 000 00 1 0 0 0 0 0 0 00
0f 000 00 1 0 0 0 0 0 0 00
10 000 00 1 0 0 0 0 0 0 00
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 000 00 1 0 0 0 0 0 0 00
15 000 00 1 0 0 0 0 0 0 00
16 000 00 1 0 0 0 0 0 0 00
17 000 00 1 0 0 0 0 0 0 00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 798.6734 MHz.
..... host bus clock speed is 99.8339 MHz.
cpu: 0, clocks: 998339, slice: 199667
CPU0<T0:998336,T1:798624,D:45,S:199667,C:998339>
cpu: 1, clocks: 998339, slice: 199667
cpu: 3, clocks: 998339, slice: 199667
cpu: 2, clocks: 998339, slice: 199667
CPU2<T0:998336,T1:399328,D:7,S:199667,C:998339>
CPU3<T0:998336,T1:199664,D:4,S:199667,C:998339>
CPU1<T0:998336,T1:598976,D:26,S:199667,C:998339>
checking TSC synchronization across CPUs: passed.
PCI: PCI BIOS revision 2.10 entry at 0xfd885, last bus=7
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 1: assuming transparent
Unknown bridge resource 2: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Discovered primary peer bus 10 [IRQ]
PCI: Discovered primary peer bus 11 [IRQ]
PCI: Discovered primary peer bus 12 [IRQ]
PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P2) -> 18
PCI->APIC IRQ transform: (B7,I1,P0) -> 16
PCI->APIC IRQ transform: (B7,I2,P0) -> 17
PCI->APIC IRQ transform: (B7,I3,P0) -> 18
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
apm: disabled - APM is not SMP safe.
mxt_scan_bios: enter
Starting kswapd v1.8
allocated 64 pages and 64 bhs reserved for the highmem bounces
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 2651538kB/2520466kB, 7808 slots per queue
next reply other threads:[~2002-11-22 2:49 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-11-22 2:49 Craig Anderson [this message]
2002-11-22 6:33 ` hyper-threading Robert M. Hyatt
2002-11-22 9:19 ` WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org Dave Jones
2002-11-22 13:35 ` Alan Cox
2002-11-22 15:28 ` Robert M. Hyatt
2002-11-25 0:53 ` Alan Cox
2002-11-25 3:26 ` Robert M. Hyatt
2002-11-25 13:15 ` Alan Cox
2002-11-25 17:25 ` Robert M. Hyatt
2002-11-25 17:57 ` Mihai Burcea
-- strict thread matches above, loose matches on Subject: below --
2005-02-15 13:06 Rinat Yangurazov
2004-10-18 3:15 David Hill
2004-09-10 17:35 Agustín Ciciliani
2003-11-14 19:58 Ingo Claro
2003-07-18 20:48 M. J. Blom
2003-05-27 5:53 Mattias Kregert
2003-05-27 6:03 ` Randy.Dunlap
2003-05-27 20:52 ` Randy.Dunlap
2003-05-03 7:54 Joshua McClintock
2003-02-09 21:20 Eli
2003-01-13 7:30 D. Nathan Cookson
2002-11-29 19:52 R. Lemos
2002-10-12 9:33 Trevor Lee
2002-10-13 3:12 ` Randy.Dunlap
2002-10-21 22:57 ` Alan Cox
2002-08-10 18:41 Chris McGinlay
2002-01-16 21:23 Tim Lee
2003-01-30 18:48 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3DDD9B56.6C3B5DFB@unminc.com \
--to=craiga@unminc.com \
--cc=linux-smp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox