linux-smp.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Juan Pedro Paredes <juampe@retemail.es>
To: linux-smp@vger.kernel.org
Subject: unexpected IO-APIC
Date: Tue, 10 Dec 2002 10:50:27 +0100	[thread overview]
Message-ID: <3DF5B8E2.6080107@retemail.es> (raw)

IBM NetVista 6349 A22p

Linux version 2.4.20-686 (herbert@gondolin) (gcc version 2.95.4 20011002 (Debian prerelease)) #2 Sun Dec 1 13:36:19 EST 2002
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007eb0000 (usable)
 BIOS-e820: 0000000007eb0000 - 0000000007efc000 (ACPI data)
 BIOS-e820: 0000000007efc000 - 0000000007efd000 (ACPI NVS)
 BIOS-e820: 0000000007efd000 - 0000000007f00000 (reserved)
 BIOS-e820: 0000000007f00000 - 0000000007f80000 (usable)
 BIOS-e820: 0000000007f80000 - 0000000008000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
found SMP MP-table at 000f5f60
hm, page 000f5000 reserved twice.
hm, page 000f6000 reserved twice.
hm, page 0009f000 reserved twice.
hm, page 000a0000 reserved twice.
On node 0 totalpages: 32640
zone(0): 4096 pages.
zone(1): 28544 pages.
zone(2): 0 pages.
ACPI: Searched entire block, no RSDP was found.
ACPI: RSDP located at physical address c00f5fb0
RSD PTR  v0 [PTLTD ]
__va_range(0x7ef87f8, 0x68): idx=8 mapped at ffff6000
ACPI table found: RSDT v1 [PTLTD    RSDT   1540.208]
__va_range(0x7efbf0a, 0x24): idx=8 mapped at ffff6000
__va_range(0x7efbf0a, 0x74): idx=8 mapped at ffff6000
ACPI table found: FACP v1 [IBM    MARLIN   1540.208]
__va_range(0x7efbf7e, 0x24): idx=8 mapped at ffff6000
__va_range(0x7efbf7e, 0x5a): idx=8 mapped at ffff6000
ACPI table found: APIC v1 [PTLTD  	 APIC   1540.208]
__va_range(0x7efbf7e, 0x5a): idx=8 mapped at ffff6000
LAPIC (acpi_id[0x0000] id[0x0] enabled[1])
CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:1] APIC version 16

IOAPIC (id[0x1] address[0xfec00000] global_irq_base[0x0])
INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1])
INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3])
LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1])
1 CPUs total
Local APIC address fee00000
__va_range(0x7efbfd8, 0x24): idx=8 mapped at ffff6000
__va_range(0x7efbfd8, 0x28): idx=8 mapped at ffff6000
ACPI table found: BOOT v1 [PTLTD  $SBFTBL$ 1540.208]
Enabling the CPU's according to the ACPI table
Intel MultiProcessor Specification v1.1
    Virtual Wire compatibility mode.
OEM ID:          Product ID:              APIC at: 0xFEE00000
I/O APIC #1 Version 32 at 0xFEC00000.
Processors: 1
IBM machine detected. Enabling interrupts during APM calls.
Kernel command line: BOOT_IMAGE=linux ro root=302
Initializing CPU#0
Detected 1694.533 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 3381.65 BogoMIPS
Memory: 123892k/130560k available (838k kernel code, 5960k reserved, 411k data, 92k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 0K, L1 D cache: 8K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 3febfbff 00000000 00000000 00000000
CPU:             Common caps: 3febfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 1 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 1 ... ok.
init IO_APIC IRQs
 IO-APIC (apicid-pin) 1-0, 1-5, 1-10, 1-11, 1-18, 1-21, 1-22 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 20.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................

IO APIC #1......
.... register #00: 01008000
.......    : physical APIC id: 01
 WARNING: unexpected IO-APIC, please mail
          to linux-smp@vger.kernel.org
.... register #01: 00178020
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0020
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 001 01  0    0    0   0   0    1    1    39
 02 001 01  0    0    0   0   0    1    1    31
 03 001 01  0    0    0   0   0    1    1    41
 04 001 01  0    0    0   0   0    1    1    49
 05 000 00  1    0    0   0   0    0    0    00
 06 001 01  0    0    0   0   0    1    1    51
 07 001 01  0    0    0   0   0    1    1    59
 08 001 01  0    0    0   0   0    1    1    61
 09 001 01  0    0    0   0   0    1    1    69
 0a 000 00  1    0    0   0   0    0    0    00
 0b 000 00  1    0    0   0   0    0    0    00
 0c 001 01  0    0    0   0   0    1    1    71
 0d 001 01  0    0    0   0   0    1    1    79
 0e 001 01  0    0    0   0   0    1    1    81
 0f 001 01  0    0    0   0   0    1    1    89
 10 001 01  1    1    0   1   0    1    1    91
 11 001 01  1    1    0   1   0    1    1    99
 12 000 00  1    0    0   0   0    0    0    00
 13 001 01  1    1    0   1   0    1    1    A1
 14 001 01  1    1    0   1   0    1    1    A9
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 001 01  1    1    0   1   0    1    1    B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ19 -> 0:19
IRQ20 -> 0:20
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1694.5646 MHz.
..... host bus clock speed is 99.6801 MHz.
cpu: 0, clocks: 996801, slice: 498400
CPU0<T0:996800,T1:498400,D:0,S:498400,C:996801>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd933, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
PCI->APIC IRQ transform: (B0,I31,P3) -> 19
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P2) -> 23
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI->APIC IRQ transform: (B2,I8,P0) -> 20
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Diskquotas version dquot_6.4.0 initialized
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS01 at 0x02f8 (irq = 3) is a 16550A
ttyS02 at 0x03e8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 2800 blocks [1 disk] into ram disk... |\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\b\\b|\b/\b-\bdone.
Freeing initrd memory: 2800k freed
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 92k freed
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Journalled Block Device driver loaded
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH2: IDE controller on PCI bus 00 dev f9
ICH2: chipset revision 18
ICH2: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
hda: IC35L020AVVA07-0, ATA DISK drive
hdc: SAMSUNG CD-ROM SC-148C, ATAPI CD/DVD-ROM drive
ide2: ports already in use, skipping probe
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c884ee44, I/O limit 4095Mb (mask 0xffffffff)
hda: 39876480 sectors (20417 MB) w/1863KiB Cache, CHS=39560/16/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: [PTBL] [2482/255/63] p1 p2
VFS: Can't find ext3 filesystem on dev ide0(3,2).
VFS: Can't find ext2 filesystem on dev ide0(3,2).
VFS: Can't find a Minix or Minix V2 filesystem on device 03:02.
Unable to identify CD-ROM format.
reiserfs: checking transaction log (device 03:02) ...
Using r5 hash to sort names
reiserfs: using 3.5.x disk format
ReiserFS version 3.6.25
Adding Swap: 1052216k swap-space (priority -1)
Real Time Clock Driver v1.10e
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:09:6B:20:18:C5, IRQ 20.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ttyS0: LSR safety check engaged!
ttyS0: LSR safety check engaged!
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 248
Linux I2O PCI support (c) 1999 Red Hat Software.
i2o: Checking for PCI I2O controllers...
Terminating i2o threads...waiting...exiting...done.
I2O Core - (C) Copyright 1999 Red Hat Software
I2O: Event thread created as pid 250
I2O LAN OSM (C) 1999 University of Helsinki.
I2O Block Storage OSM v0.9
   (c) Copyright 1999-2001 Red Hat Software.
i2o_block: registered device at major 80
i2o_block: Checking for Boot device...
i2o_block: Checking for I2O Block devices...
I2O configuration manager v 0.04.
  (C) Copyright 1999 Red Hat Software
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eth0: wait_for_cmd_done timeout!
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
eth0: OEM i82557/i82558 10/100 Ethernet, 00:09:6B:20:18:C5, IRQ 20.
  Board assembly 000000-000, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).



             reply	other threads:[~2002-12-10  9:50 UTC|newest]

Thread overview: 133+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-12-10  9:50 Juan Pedro Paredes [this message]
  -- strict thread matches above, loose matches on Subject: below --
2006-07-06 20:37 unexpected IO-APIC Danielle Hines
2006-07-07 13:12 ` Erik Mouw
2006-03-07  4:19 Mimi Zhou
2005-07-12 13:56 Unexpected IO-APIC Bill Baker
2005-07-12 16:42 ` randy_dunlap
2005-06-18  5:04 unexpected IO-APIC darshan
2005-05-26  8:44 Bernd Strebel
2005-05-27  5:33 ` randy_dunlap
2005-05-27  9:26   ` Bernd Strebel
2005-05-27 17:30     ` randy_dunlap
2005-05-27 22:24       ` Bernd Strebel
2005-05-30 22:43     ` randy_dunlap
2005-03-14 20:48 Unexpected IO-APIC Iuri Wickert
2005-03-15 20:32 ` Randy.Dunlap
2005-03-05 21:48 Marco van Beek
2005-03-15 20:23 ` Randy.Dunlap
2005-02-28 23:34 unexpected IO-APIC Mike Farnam
2005-03-15 17:48 ` Randy.Dunlap
2005-03-15 20:14 ` Randy.Dunlap
2005-01-31 17:41 Gary Buckmaster
2005-01-25 18:23 Unexpected IO-APIC Martin Slovacek
2005-01-25 18:59 ` Earle Nietzel
2004-12-28  6:58 unexpected IO-APIC Paul
2004-12-06  4:23 unexpected io-apic Simon Story
2004-07-23 20:33 unexpected IO-APIC Thomas Schlag
2004-07-08  7:52 S.K.Goel
2004-06-23 11:44 Jörg Lübbert
2004-06-23 11:42 Jörg Lübbert
2004-06-18 18:15 Unexpected IO-APIC GIN (Garreth Jeremiah)
2004-04-23  8:28 unexpected IO-APIC Piers Lauder
2004-04-18 17:53 dpn22
2004-04-07  8:11 JKolk
2004-04-01 14:32 Ian Jenkinson
2004-02-24 15:07 Unexpected IO-APIC Lyle Worthington
2004-02-24 16:38 ` Randy.Dunlap
2004-02-24 18:03   ` Lyle Worthington
2004-02-24 18:31     ` Randy.Dunlap
2004-02-15  8:24 unexpected IO-APIC Massa Takeuti
2004-01-16  3:40 Polyhead
2004-01-11  8:53 Russ McCallister
2003-12-18  7:21 Matthew Blakley
2003-12-13  5:50 Sterling Chavis
2003-11-23  6:38 W M Brelsford
2003-11-20  3:09 Chris Johns
2003-11-12 21:16 A.J. Duijn
2003-10-16 17:44 Lance Davis
2003-09-25 15:09 Unexpected IO-APIC David van Hoose
2003-09-11 16:36 unexpected IO-APIC John Birck
2003-09-04 16:37 Michael Sorrentino
2003-09-04 19:35 ` Alan Cox
2003-09-04  4:19 Unexpected IO-APIC Jeremy Sylvestre
2003-09-01 12:31 Alfonso Abeger
2003-08-21  7:51 Grage, Sascha
2003-08-12 15:40 unexpected IO-APIC Tom Parker
2003-08-08 16:49 Christian Stein
2003-07-29 13:52 Schulman.Andrew
2003-07-17 15:09 Unexpected IO-APIC Joe Brown
2003-07-12 23:34 unexpected IO-APIC Toth Szabolcs
2003-07-13  4:09 ` Randy.Dunlap
2003-06-09 21:52 Unexpected IO-APIC Julian R. Coombes
2003-06-07 10:06 unexpected IO-APIC Toni Mueller
2003-06-07 17:40 ` Randy.Dunlap
2003-06-05 10:37 Mimmus
2003-06-05 14:42 ` Randy.Dunlap
2003-06-04  2:19 Greg Norris
2003-05-29 19:44 Jürgen Adler
2003-05-24  3:15 Brian Laflum
2003-05-23  3:57 Ben Osborne
2003-05-25 20:07 ` Alan Cox
2003-05-22  7:02 Anders Tor Westerberg
2003-04-22  6:41 Ilo Lorusso
2003-04-18  2:43 Phaedrus
2003-04-16 23:36 lk
2003-04-17 11:43 ` Earle R. Nietzel
2003-04-17 18:46   ` lk
2003-04-17 20:28     ` Randy.Dunlap
2003-04-17 22:52       ` lk
2003-04-17 23:14         ` Randy.Dunlap
2003-04-10 12:22 Unexpected IO-APIC Milan Kerslager
2003-03-31 19:35 unexpected IO-APIC Pascal Hofmann
2003-03-27 18:03 Dennis Lambe Jr.
2003-03-27 12:13 Jakub Zawierucha
2003-03-15 11:46 Peter Ruskin
2003-03-08 17:14 Scott Beck
2003-03-02 15:03 Lorant Dobos
2003-02-27  8:14 Nick Gaugler
2003-02-22  0:50 Peter Ruskin
2003-02-06 22:59 Philipp Berndt
2003-02-01 22:15 Luis Claudio Pérez Tato
2003-01-30 11:24 Joern Strassemeyer
2003-01-30  6:55 Andrew Egin
2003-01-18 16:48 Andy Igoshin
2003-01-10 10:04 frontal
2003-01-03  6:19 Chris
2002-12-28 10:32 Jonathan Araña Cruz
2002-12-27  8:53 Marc
2002-12-19  5:21 Carlos Madrid
2002-12-17 14:46 Christian Heimanns
2002-12-16 12:21 Unexpected IO-APIC Pasquale Federico Zema
2002-12-06  4:41 unexpected IO-APIC Toni Cerdà
2002-12-02 11:30 huba
2002-11-28 23:22 Erik Meusel
2002-11-29  0:40 ` Alan Cox
2002-11-27 10:42 Nigbur, Rolf (IKK-Bundesverband)
2002-11-27 12:36 ` Alan Cox
2002-11-25  9:59 Vitor Dias da Silva
2002-11-23  0:15 Unexpected IO-APIC Mick
2002-11-22  7:33 dix.edv
2002-10-20 22:43 unexpected IO-APIC John Osswald
2002-10-03 19:12 Unexpected IO-APIC Alexander Tsibulsky
2002-09-16 13:54 unexpected IO-APIC Juergen Rose
2002-08-24 12:21 Unexpected IO-APIC David Brownell
2002-08-18 14:27 unexpected IO-APIC Kim Bisgaard
2002-07-26 21:42 Joseph S. Wigton
2002-07-19 16:15 Barry Gamblin
2002-07-06 19:59 Paul Parsons
2002-06-28 19:05 Unexpected IO-APIC Jawaid.Bazyar
2002-06-20 15:26 Andrew Ott
2002-06-17  4:03 unexpected IO-APIC Adam Powers
2002-06-15  1:25 Steve Keith
2002-06-06  3:38 Chris Kogelnik
2002-06-01 18:52 Luigi Rosa
2002-06-01 19:59 ` Vladimir G. Ivanovic
2002-06-02 23:03   ` Randy.Dunlap
2002-05-31 12:43 Françoise Guilbault
2002-05-20 13:41 zoli
2002-05-20 14:31 ` Alan Cox
2002-05-03 23:00 unexpected io-apic Schroettner Robert
2002-05-03  8:10 unexpected IO-APIC Giulio Bottazzi
2002-04-09 18:52 Mauricio Girardi
2002-04-08  9:31 Paul Hemstock
2002-04-08 14:46 ` Randy.Dunlap

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3DF5B8E2.6080107@retemail.es \
    --to=juampe@retemail.es \
    --cc=linux-smp@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).