From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joern Strassemeyer Subject: unexpected IO-APIC Date: Thu, 30 Jan 2003 12:24:15 +0100 Sender: linux-smp-owner@vger.kernel.org Message-ID: <3E390B5F.9090303@netscape.net> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-smp@vger.kernel.org Hi, I have problems running my Reatek 8029(AS) netcard using 2.4.18. When I boot I get the following messages: <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>.... register #01: 00178014 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0014 <4> WARNING: unexpected IO-APIC, please mail <4> to linux-smp@vger.kernel.org <7>.... register #02: 02000000 <7>....... : arbitration: 02 when i do a pin the following messages appear.: Jan 29 13:52:17 alnus kernel: NETDEV WATCHDOG: eth0: transmit timed out Jan 29 13:52:17 alnus kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=2600. Jan 29 13:52:19 alnus kernel: NETDEV WATCHDOG: eth0: transmit timed out Jan 29 13:52:19 alnus kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=121. Jan 29 13:52:21 alnus kernel: NETDEV WATCHDOG: eth0: transmit timed out Jan 29 13:52:21 alnus kernel: eth0: Tx timed out, lost interrupt? TSR=0x3, ISR=0x3, t=100. does aynyone have an idea what is wrong? I Have a Micro ATX Mainboard (MS-6533/G/EG (v1.X)) and a Realtek 8029 Netcard. Here is the complet boot.log: nspecting /boot/System.map-2.4.18-64GB-SMP Loaded 13537 symbols from /boot/System.map-2.4.18-64GB-SMP. Symbols match kernel version 2.4.18. Loaded 20 symbols from 2 modules. klogd 1.4.1, log source = ksyslog started. <4>Linux version 2.4.18-64GB-SMP (root@SMP_X86.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 SMP Wed Mar 27 13:58:12 UTC 2002 <6>BIOS-provided physical RAM map: <4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) <4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) <4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) <4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) <4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) <4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) <4> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) <4> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) <4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) <4>Scanning bios EBDA for MXT signature <4>found SMP MP-table at 000f5c00 <4>hm, page 000f5000 reserved twice. <4>hm, page 000f6000 reserved twice. <4>hm, page 000f1000 reserved twice. <4>hm, page 000f2000 reserved twice. <4>On node 0 totalpages: 131056 <4>zone(0): 4096 pages. <4>zone(1): 126960 pages. <4>zone(2): 0 pages. <6>ACPI: Searched entire block, no RSDP was found. <6>ACPI: RSDP located at physical address c00f7670 <6>RSD PTR v0 [AWARD ] <4>__va_range(0x1fff3000, 0x68): idx=32 mapped at fffde000 <6>ACPI table found: RSDT v1 [AWARD AWRDACPI 16944.11825] <4>init.c:147: bad pte c0008ef0(000000001fff3163). <4>__va_range(0x1fff3040, 0x24): idx=32 mapped at fffde000 <4>init.c:147: bad pte c0008ef0(000000001fff3163). <4>__va_range(0x1fff3040, 0x74): idx=32 mapped at fffde000 <6>ACPI table found: FACP v1 [AWARD AWRDACPI 16944.11825] <4>init.c:147: bad pte c0008ef0(000000001fff3163). <4>__va_range(0x1fff6ec0, 0x24): idx=32 mapped at fffde000 <4>init.c:147: bad pte c0008ef0(000000001fff6163). <4>__va_range(0x1fff6ec0, 0x54): idx=32 mapped at fffde000 <6>ACPI table found: APIC v1 [AWARD AWRDACPI 16944.11825] <4>init.c:147: bad pte c0008ef0(000000001fff6163). <4>__va_range(0x1fff6ec0, 0x54): idx=32 mapped at fffde000 <6>LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) <6>CPU 0 (0x0000) enabledProcessor #0 Unknown CPU [15:2] APIC version 16 <4> <6>IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) <6>INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) <6>INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x0] trigger[0x0]) <6>1 CPUs total <6>Local APIC address fee00000 <4>Enabling the CPU's according to the ACPI table <4>Intel MultiProcessor Specification v1.4 <4> Virtual Wire compatibility mode. <4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 <4>I/O APIC #2 Version 17 at 0xFEC00000. <4>Enabling APIC mode: Flat. Using 1 I/O APICs <4>Processors: 1 <4>Building zonelist for node : 0 <4>Kernel command line: auto BOOT_IMAGE=linux ro root=342 acpismp=force hdd=ide-scsi <4>ide_setup: hdd=ide-scsi <6>Initializing CPU#0 <4>Detected 2523.119 MHz processor. <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 5033.16 BogoMIPS <4>Memory: 512316k/524224k available (1504k kernel code, 11520k reserved, 429k data, 144k init, 0k highmem) <4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) <4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) <4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes) <4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) <4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes) <7>CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 12K, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Hyper-Threading is disabled <7>CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 <6>Intel machine check architecture supported. <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <6>Enabling fast FPU save and restore... done. <6>Enabling unmasked SIMD FPU exception support... done. <6>Checking 'hlt' instruction... OK. <4>POSIX conformance testing by UNIFIX <4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) <4>mtrr: detected mtrr type: Intel <7>CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 <6>CPU: L1 I cache: 12K, L1 D cache: 8K <6>CPU: L2 cache: 512K <6>CPU: Hyper-Threading is disabled <7>CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 <6>Intel machine check reporting enabled on CPU#0. <7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 <7>CPU: Common caps: 3febfbff 00000000 00000000 00000000 <4>CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 04 <4>per-CPU timeslice cutoff: 1462.34 usecs. <4>enabled ExtINT on CPU#0 <4>ESR value before enabling vector: 00000000 <4>ESR value after enabling vector: 00000000 <3>Error: only one processor found. <4>ENABLING IO-APIC IRQs <4>Setting 2 in the phys_id_present_map <6>...changing IO-APIC physical APIC ID to 2 ... ok. <7>init IO_APIC IRQs <7> IO-APIC (apicid-pin) 2-0, 2-5, 2-9, 2-11, 2-17, 2-19 not connected. <6>..TIMER: vector=0x31 pin1=2 pin2=0 <7>number of MP IRQ sources: 22. <7>number of IO-APIC #2 registers: 24. <6>testing the IO APIC....................... <4> <7>IO APIC #2...... <7>.... register #00: 02000000 <7>....... : physical APIC id: 02 <7>.... register #01: 00178014 <7>....... : max redirection entries: 0017 <7>....... : PRQ implemented: 1 <7>....... : IO APIC version: 0014 <4> WARNING: unexpected IO-APIC, please mail <4> to linux-smp@vger.kernel.org <7>.... register #02: 02000000 <7>....... : arbitration: 02 <7>.... IRQ redirection table: <7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: <7> 00 000 00 1 0 0 0 0 0 0 00 <7> 01 001 01 0 0 0 0 0 1 1 39 <7> 02 001 01 0 0 0 0 0 1 1 31 <7> 03 001 01 0 0 0 0 0 1 1 41 <7> 04 001 01 0 0 0 0 0 1 1 49 <7> 05 000 00 1 0 0 0 0 0 0 00 <7> 06 001 01 0 0 0 0 0 1 1 51 <7> 07 001 01 0 0 0 0 0 1 1 59 <7> 08 001 01 0 0 0 0 0 1 1 61 <7> 09 000 00 1 0 0 0 0 0 0 00 <7> 0a 001 01 0 0 0 0 0 1 1 69 <7> 0b 000 00 1 0 0 0 0 0 0 00 <7> 0c 001 01 0 0 0 0 0 1 1 71 <7> 0d 001 01 0 0 0 0 0 1 1 79 <7> 0e 001 01 0 0 0 0 0 1 1 81 <7> 0f 001 01 0 0 0 0 0 1 1 89 <7> 10 001 01 1 1 0 1 0 1 1 91 <7> 11 000 00 1 0 0 0 0 0 0 00 <7> 12 001 01 1 1 0 1 0 1 1 99 <7> 13 000 00 1 0 0 0 0 0 0 00 <7> 14 001 01 1 1 0 1 0 1 1 A1 <7> 15 001 01 1 1 0 1 0 1 1 A9 <7> 16 001 01 1 1 0 1 0 1 1 B1 <7> 17 001 01 1 1 0 1 0 1 1 B9 <7>IRQ to pin mappings: <7>IRQ0 -> 0:2 <7>IRQ1 -> 0:1 <7>IRQ3 -> 0:3 <7>IRQ4 -> 0:4 <7>IRQ6 -> 0:6 <7>IRQ7 -> 0:7 <7>IRQ8 -> 0:8 <7>IRQ10 -> 0:10 <7>IRQ12 -> 0:12 <7>IRQ13 -> 0:13 <7>IRQ14 -> 0:14 <7>IRQ15 -> 0:15 <7>IRQ16 -> 0:16 <7>IRQ18 -> 0:18 <7>IRQ20 -> 0:20 <7>IRQ21 -> 0:21 <7>IRQ22 -> 0:22 <7>IRQ23 -> 0:23 <6>.................................... done. <4>Using local APIC timer interrupts. <4>calibrating APIC timer ... <4>..... CPU clock speed is 2523.1537 MHz. <4>..... host bus clock speed is 132.7974 MHz. <4>cpu: 0, clocks: 1327974, slice: 663987 <4>CPU0 <4>Waiting on wait_init_idle (map = 0x0) <4>All processors have done init_idle <4>PCI: PCI BIOS revision 2.10 entry at 0xfb620, last bus=1 <4>PCI: Using configuration type 1 <4>PCI: Probing PCI hardware <3>Unknown bridge resource 0: assuming transparent <6>PCI: Using IRQ router SIS [1039/0008] at 00:02.0 <6>PCI->APIC IRQ transform: (B0,I2,P0) -> 16 <6>PCI->APIC IRQ transform: (B0,I2,P2) -> 18 <6>PCI->APIC IRQ transform: (B0,I3,P0) -> 20 <6>PCI->APIC IRQ transform: (B0,I3,P1) -> 21 <6>PCI->APIC IRQ transform: (B0,I3,P2) -> 22 <6>PCI->APIC IRQ transform: (B0,I3,P3) -> 23 <6>PCI->APIC IRQ transform: (B0,I7,P0) -> 18 <6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16 <6>Linux NET4.0 for Linux 2.4 <6>Based upon Swansea University Computer Society NET3.039 <4>Initializing RT netlink socket <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16) <4>mxt_scan_bios: enter <4>Starting kswapd <4>kinoded started <5>VFS: Diskquotas version dquot_6.5.0 initialized <5>ACPI: APM is already active, exiting <6>vesafb: framebuffer at 0xd0000000, mapped to 0xe080d000, size 65536k <6>vesafb: mode is 800x600x16, linelength=1600, pages=2 <6>vesafb: protected mode interface info at c000:e870 <6>vesafb: scrolling: redraw <6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 <6>Looking for splash picture.... found (800x600, 30406 bytes). <4>Console: switching to colour frame buffer device 82x26 <6>fb0: VESA VGA frame buffer device <4>pty: 256 Unix98 ptys configured <6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI SERIAL_ACPI enabled <6>ttyS00 at 0x03f8 (irq = 4) is a 16550A <6>ttyS01 at 0x02f8 (irq = 3) is a 16550A <6>Real Time Clock Driver v1.10e <4>block: 128 slots per queue, batch=32 <4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize <6>Uniform Multi-Platform E-IDE driver Revision: 6.31 <4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx <4>SIS5513: IDE controller on PCI bus 00 dev 15 <4>SIS5513: chipset revision 0 <4>SIS5513: not 100%% native mode: will probe irqs later <4>SiS5513 <4> ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA <4> ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA <4>hda: WDC WD600BB-00CAA1, ATA DISK drive <4>hdb: MAXTOR 6L040J2, ATA DISK drive <4>hdc: MATSHITADVD-ROM SR-8587, ATAPI CD/DVD-ROM drive <4>hdd: _NEC CD-RW NR-9100A, ATAPI CD/DVD-ROM drive <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 <4>ide1 at 0x170-0x177,0x376 on irq 15 <4>hda: safely enabled flush <6>hda: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=7297/255/63 <4>hdb: safely enabled flush <6>hdb: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63 <4>hdc: no flushcache support <4>hdc: ATAPI 48X DVD-ROM drive, 256kB Cache <6>Uniform CD-ROM driver Revision: 3.12 <4>ide-floppy driver 0.99 <6>Partition check: <6> hda: hda1 <6> hdb: hdb1 hdb2 <6>Floppy drive(s): fd0 is 1.44M <6>FDC 0 is a post-1991 82077 <6>loop: loaded (max 16 devices) <6>Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 <6>Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. <4>ide-floppy driver 0.99 <6>SCSI subsystem driver Revision: 1.00 <3>request_module[scsi_hostadapter]: Root fs not mounted <3>request_module[scsi_hostadapter]: Root fs not mounted <6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>IP: routing cache hash table of 4096 buckets, 32Kbytes <4>TCP: Hash tables configured (established 32768 bind 32768) <6>Linux IP multicast router 0.06 plus PIM-SM <6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. <5>RAMDISK: Compressed image found at block 0 <4>Uncompressing............done. <4>Freeing initrd memory: 574k freed <4>VFS: Mounted root (ext2 filesystem). <4>hdd: no flushcache support <6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices <4> Vendor: _NEC Model: CD-RW NR-9100A Rev: 2.12 <4> Type: CD-ROM ANSI SCSI revision: 02 <4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 <4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray <4>reiserfs: checking transaction log (device 03:42) ... <4>Using r5 hash to sort names <4>ReiserFS version 3.6.25 <4>VFS: Mounted root (reiserfs filesystem) readonly. <4>change_root: old root has d_count=2 <5>Trying to unmount old root ... okay <4>Freeing unused kernel memory: 144k freed <6>md: Autodetecting RAID arrays. <6>md: autorun ... <6>md: ... autorun DONE. <6>Adding Swap: 1028120k swap-space (priority 42) Kernel logging (ksyslog) stopped. Kernel log daemon terminating. Boot logging started on /dev/tty1(/dev/console) at Thu Jan 30 12:54:32 2003 Activating swap-devices in /etc/fstab... doneChecking file systems... fsck 1.26 (3-Feb-2002) Reiserfs super block in block 16 on 0x342 of format 3.6 with standard journal Blocks (total/free): 9514496/8897399 by 4096 bytes Filesystem is cleanly umounted doneMounting local file systems... proc on /proc type proc (rw) devpts on /dev/pts type devpts (rw) nothing was mounted doneRestore device permissions done Activating remaining swap-devices in /etc/fstab... doneMounting shared memory FS on /dev/shm done Setting up the CMOS clock done Setting up timezone data done Configuring serial ports... ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A Configured serial ports doneSetting up hostname 'alnus' done Setting up loopback interface done Creating /var/log/boot.msg doneEnabling syn flood protection done Disabling IP forwarding done killproc: kill(28,29) Running /etc/init.d/boot.local Boot logging started on /dev/tty1(/dev/console) at Thu Jan 30 11:54:40 2003 Master Resource Control: previous runlevel: N, switching to runlevel: 5 Starting personal-firewall (initial) [not active] unused Initializing random number generator done donekillproc: kill(28,3) INIT: Entering runlevel: 5 /etc/init.d/rc5.d/S01isdn start '/etc/init.d/rc5.d/S01isdn start' exits with status 0 /etc/init.d/rc5.d/S01personal-firewall.initial start '/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 6 /etc/init.d/rc5.d/S01random start '/etc/init.d/rc5.d/S01random start' exits with status 0 /etc/init.d/rc5.d/S05network start Setting up network interfaces: lo done eth0 done Starting syslog services'/etc/init.d/rc5.d/S05network start' exits with status 0 /etc/init.d/rc5.d/S06syslog start startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/syslogd ] startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/klogd ] done Starting hotplugging services ['/etc/init.d/rc5.d/S06syslog start' exits with status 0 /etc/init.d/rc5.d/S07hotplug start net pci usb ] done '/etc/init.d/rc5.d/S07hotplug start' exits with status 0 /etc/init.d/rc5.d/S08hwscan start Starting hardware scan on boot'/etc/init.d/rc5.d/S08hwscan start' exits with status 0 /etc/init.d/rc5.d/S08portmap start Starting RPC portmap daemonstartproc: execve (/sbin/portmap) [ /sbin/portmap ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/sbin/portmap ] done '/etc/init.d/rc5.d/S08portmap start' exits with status 0 /etc/init.d/rc5.d/S08splash_early start '/etc/init.d/rc5.d/S08splash_early start' exits with status 0 /etc/init.d/rc5.d/S08sshd start Starting SSH daemonstartproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sshd ] done '/etc/init.d/rc5.d/S08sshd start' exits with status 0 /etc/init.d/rc5.d/S09nfs start '/etc/init.d/rc5.d/S09nfs start' exits with status 0 /etc/init.d/rc5.d/S10alsasound start Starting sound driver done '/etc/init.d/rc5.d/S10alsasound start' exits with status 0 /etc/init.d/rc5.d/S10atd start Starting service at daemonstartproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/atd ] done '/etc/init.d/rc5.d/S10atd start' exits with status 0 /etc/init.d/rc5.d/S10fbset start '/etc/init.d/rc5.d/S10fbset start' exits with status 0 /etc/init.d/rc5.d/S10sendmail start Initializing SMTP port (sendmail)startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -O DaemonPortOptions=Addr=127.0.0.1 -L sendmail -Am -bd -q30m -om ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] startproc: execve (/usr/sbin/sendmail) [ /usr/sbin/sendmail -L sendmail-client -Ac -q30m ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/sendmail ] done '/etc/init.d/rc5.d/S10sendmail start' exits with status 0 /etc/init.d/rc5.d/S11kbd start Loading keymap qwertz/de-latin1-nodeadkeys.map.gz doneLoading compose table winkeys shiftctrl latin1.add done Loading console font lat9w-16.psfu doneLoading screenmap trivial doneSetting up console ttys done'/etc/init.d/rc5.d/S11kbd start' exits with status 0 /etc/init.d/rc5.d/S11smbfs start '/etc/init.d/rc5.d/S11smbfs start' exits with status 0 /etc/init.d/rc5.d/S11splash start '/etc/init.d/rc5.d/S11splash start' exits with status 0 /etc/init.d/rc5.d/S11xdm start Starting service kdmstartproc: execve (/opt/kde3/bin/kdm) [ /opt/kde3/bin/kdm ], [ PWD=/ acpismp=force LC_MESSAGES= HOSTNAME=alnus CONSOLE=/dev/console RC_LANG=de_DE@euro PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 QTDIR=/usr/lib/qt3 KDEROOTHOME=/root/.kdm LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=26 LANG=de_DE@euro LC_NUMERIC= SHLVL=2 COLUMNS=82 LC_CTYPE=de_DE@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.82 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde3/bin/kdm ] done '/etc/init.d/rc5.d/S11xdm start' exits with status 0 /etc/init.d/rc5.d/S12cron start Starting CRON daemonstartproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/cron ] done Starting Name Service Cache Daemon'/etc/init.d/rc5.d/S12cron start' exits with status 0 /etc/init.d/rc5.d/S12nscd start startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ acpismp=force HOSTNAME=alnus CONSOLE=/dev/console PREVLEVEL=N AUTOBOOT=YES REDIRECT=/dev/tty1 MACHTYPE=i386-suse-linux LINES=26 SHLVL=2 COLUMNS=82 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.82 _=/sbin/startproc DAEMON=/usr/sbin/nscd ] done '/etc/init.d/rc5.d/S12nscd start' exits with status 0 /etc/init.d/rc5.d/S22personal-firewall.final start Starting personal-firewall (final) [not active] unused Master Resource Control: runlevel 5 has been reached Skipped services in runlevel 5: personal-firewall.initial personal-firewall.final '/etc/init.d/rc5.d/S22personal-firewall.final start' exits with status 6 /etc/init.d/rc5.d/S22splash_late start '/etc/init.d/rc5.d/S22splash_late start' exits with status 0 killproc: kill(261,3)