Linux version 2.4.18 (root@Phoenix) (gcc version 2.95.4 20011002 (Debian prerelease)) #7 SMP Fri Jan 31 11:34:18 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS) BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) found SMP MP-table at 000f51b0 hm, page 000f5000 reserved twice. hm, page 000f6000 reserved twice. hm, page 000f1000 reserved twice. hm, page 000f2000 reserved twice. On node 0 totalpages: 65520 zone(0): 4096 pages. zone(1): 61424 pages. zone(2): 0 pages. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 Pentium(tm) Pro APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Processors: 1 Kernel command line: BOOT_IMAGE=bz ro root=801 Initializing CPU#0 Detected 1732.898 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3460.30 BogoMIPS Memory: 254936k/262080k available (1494k kernel code, 6756k reserved, 489k data, 244k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: Before vendor init, caps: 0383fbff c1c3fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0383fbff c1c3fbff 00000000 00000000 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000 CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000 CPU0: AMD Athlon(tm) XP 2100+ stepping 02 per-CPU timeslice cutoff: 731.68 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Error: only one processor found. ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-11, 2-16, 2-18, 2-20, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 23. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 0 0 0 0 1 1 71 0a 001 01 1 1 0 1 0 1 1 79 0b 000 00 1 0 0 0 0 0 0 00 0c 001 01 0 0 0 0 0 1 1 81 0d 001 01 0 0 0 0 0 1 1 89 0e 001 01 0 0 0 0 0 1 1 91 0f 001 01 0 0 0 0 0 1 1 99 10 000 00 1 0 0 0 0 0 0 00 11 001 01 1 1 0 1 0 1 1 A1 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 001 01 1 1 0 1 0 1 1 B1 16 001 01 1 1 0 1 0 1 1 B9 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ21 -> 0:21 IRQ22 -> 0:22 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1732.8417 MHz. ..... host bus clock speed is 266.5910 MHz. cpu: 0, clocks: 2665910, slice: 1332955 CPU0 Waiting on wait_init_idle (map = 0x0) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Unknown bridge resource 2: assuming transparent PCI: Using IRQ router VIA [1106/3177] at 00:11.0 PCI->APIC IRQ transform: (B0,I9,P0) -> 17 PCI->APIC IRQ transform: (B0,I11,P0) -> 19 PCI->APIC IRQ transform: (B0,I16,P0) -> 21 PCI->APIC IRQ transform: (B0,I16,P1) -> 21 PCI->APIC IRQ transform: (B0,I16,P2) -> 21 PCI->APIC IRQ transform: (B0,I16,P3) -> 19 PCI->APIC IRQ transform: (B0,I17,P0) -> 10 PCI->APIC IRQ transform: (B0,I17,P2) -> 22 PCI: Via IRQ fixup for 00:10.0, from 10 to 5 PCI: Via IRQ fixup for 00:10.1, from 11 to 5 PCI: Via IRQ fixup for 00:10.2, from 10 to 5 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd parport0: PC-style at 0x378 (0x778) [PCSPP(,...)] parport0: irq 7 detected pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A lp0: using parport0 (polling). block: 128 slots per queue, batch=32 Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 89 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xe400-0xe407, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xe408-0xe40f, BIOS settings: hdc:DMA, hdd:DMA hda: Maxtor 91366U4, ATA DISK drive hdb: Maxtor 85250A6, ATA DISK drive hdc: Hewlett-Packard CD-Writer Plus 8100, ATAPI CD/DVD-ROM drive hdd: ATAPI CDROM, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 26684784 sectors (13663 MB) w/2048KiB Cache, CHS=1661/255/63 hdb: 10259160 sectors (5253 MB) w/256KiB Cache, CHS=638/255/63 hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache Uniform CD-ROM driver Revision: 3.12 hdd: ATAPI 4X CD-ROM drive, 128kB Cache Partition check: hda: hda1 hda2 < hda5 hda6 hda7 > hdb: hdb1 hdb2 < hdb5 hdb6 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) natsemi.c:v1.07 1/9/2001 Written by Donald Becker http://www.scyld.com/network/natsemi.html (unofficial 2.4.x kernel port, version 1.07+LK1.0.14, Nov 27, 2001 Jeff Garzik, Tjeerd Mulder) eth0: NatSemi DP8381[56] at 0xd0800000, 00:40:f4:52:3c:a8, IRQ 19. Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 203M agpgart: Detected Via Apollo Pro KT266 chipset agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized tdfx 1.0.0 20010216 on minor 0 [drm] AGP 0.99 on VIA Apollo KT133 @ 0xe0000000 64MB [drm] Initialized radeon 1.1.1 20010405 on minor 1 SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 aic7880: Single Channel A, SCSI Id=7, 16/253 SCBs Vendor: SEAGATE Model: ST34520N Rev: 1498 Type: Direct-Access ANSI SCSI revision: 02 (scsi0:A:0): 10.000MB/s transfers (10.000MHz, offset 15) scsi0:A:0:0: Tagged Queuing enabled. Depth 253 scsi1 : SCSI host adapter emulation for IDE ATAPI devices Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sda: 8888924 512-byte hdwr sectors (4551 MB) sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > usb.c: registered new driver usbdevfs usb.c: registered new driver hub uhci.c: USB Universal Host Controller Interface driver v1.1 uhci.c: USB UHCI at I/O 0xd800, IRQ 21 usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB UHCI at I/O 0xdc00, IRQ 21 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected uhci.c: USB UHCI at I/O 0xe000, IRQ 21 usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 244k freed Adding Swap: 337324k swap-space (priority -1) eth0: link up. eth0: Setting full-duplex based on negotiated link capability. eth0: remaining active for wake-on-lan eth0: link up. eth0: Setting full-duplex based on negotiated link capability. VFS: Disk change detected on device ide1(22,64)