From mboxrd@z Thu Jan 1 00:00:00 1970 From: Piotr Kapiszewski Subject: unexected IO-APIC: SuperMicro X5DPI-G2 (6023P-i) Date: Fri, 21 Mar 2003 08:45:31 -0800 Sender: linux-smp-owner@vger.kernel.org Message-ID: <3E7B41AB.3040102@3dgamers.com> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: List-Id: Content-Type: text/plain; charset="us-ascii"; format="flowed" To: linux-smp@vger.kernel.org SuperMicro X5DPI-G2 with 2 XEON 2.4Gig CPU's 2.4.20 build running on top of RedHat 7.2 -Kapi Linux version 2.4.20 (root@proxy3.3dgamers.com) (gcc version 2.96 20000731 (Red Hat Linux 7.2 2.96-112.7.2)) #6 SMP Wed Mar 19 14:11:18 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fef0000 (usable) BIOS-e820: 000000007fef0000 - 000000007fefc000 (ACPI data) BIOS-e820: 000000007fefc000 - 000000007ff00000 (ACPI NVS) BIOS-e820: 000000007ff00000 - 000000007ff80000 (usable) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f6a70 hm, page 000f6000 reserved twice. hm, page 000f7000 reserved twice. hm, page 0009f000 reserved twice. hm, page 000a0000 reserved twice. On node 0 totalpages: 524160 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294784 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f6ad0 RSD PTR v0 [PTLTD ] __va_range(0x7fef85c9, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [PTLTD RSDT 1540.0] __va_range(0x7fefbe60, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefbe60, 0x74): idx=8 mapped at ffff6000 ACPI table found: FACP v1 [INTEL K_CANYON 1540.0] __va_range(0x7fefbed4, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefbed4, 0xb4): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [PTLTD APIC 1540.0] __va_range(0x7fefbed4, 0xb4): idx=8 mapped at ffff6000 LAPIC (acpi_id[0x0000] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC (acpi_id[0x0001] id[0x6] enabled[1]) CPU 1 (0x0600) enabledProcessor #6 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC (acpi_id[0x0002] id[0x1] enabled[1]) CPU 2 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC (acpi_id[0x0003] id[0x7] enabled[1]) CPU 3 (0x0700) enabledProcessor #7 Pentium 4(tm) XEON(tm) APIC version 16 IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) IOAPIC (id[0x3] address[0xfec80000] global_irq_base[0x18]) IOAPIC (id[0x4] address[0xfec80400] global_irq_base[0x30]) IOAPIC (id[0x5] address[0xfec82000] global_irq_base[0x48]) IOAPIC (id[0x8] address[0xfec82400] global_irq_base[0x60]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x1] trigger[0x1]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) LAPIC_NMI (acpi_id[0x0000] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0001] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0002] polarity[0x1] trigger[0x1] lint[0x1]) LAPIC_NMI (acpi_id[0x0003] polarity[0x1] trigger[0x1] lint[0x1]) 4 CPUs total Local APIC address fee00000 __va_range(0x7fefbf88, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefbf88, 0x28): idx=8 mapped at ffff6000 ACPI table found: BOOT v1 [PTLTD $SBFTBL$ 1540.0] __va_range(0x7fefbfb0, 0x24): idx=8 mapped at ffff6000 __va_range(0x7fefbfb0, 0x50): idx=8 mapped at ffff6000 ACPI table found: SPCR v1 [PTLTD $UCRTBL$ 1540.0] Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: Kings Canyon APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFEC80000. I/O APIC #4 Version 32 at 0xFEC80400. I/O APIC #5 Version 32 at 0xFEC82000. I/O APIC #8 Version 32 at 0xFEC82400. Processors: 4 Kernel command line: auto BOOT_IMAGE=linux-2420 ro root=303 BOOT_FILE=/boot/vmlinuz-2.4.20 Initializing CPU#0 Detected 2399.361 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4784.12 BogoMIPS Memory: 2068728k/2096640k available (1356k kernel code, 27460k reserved, 550k data, 140k init, 1179072k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 per-CPU timeslice cutoff: 1462.99 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4797.23 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 2/6 eip 2000 Initializing CPU#2 masked ExtINT on CPU#2 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4797.23 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#2. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU2: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Booting processor 3/7 eip 2000 Initializing CPU#3 masked ExtINT on CPU#3 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4797.23 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 3 Intel machine check reporting enabled on CPU#3. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU3: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07 Total of 4 processors activated (19175.83 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 cpu_sibling_map[2] = 3 cpu_sibling_map[3] = 2 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. Setting 5 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 5 ... ok. Setting 8 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 8 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-10, 2-11, 2-17, 2-20, 2-21, 2-22, 2-23, 3-0, 3-1, 3-2, 3-3, 3-6, 3-7, 3-8, 3-9, 3-10, 3-11, 3-12, 3-13, 3-14, 3-15, 3-16, 3-17, 3-18, 3-19, 3-20, 3-21, 3-22, 3-23, 4-0, 4-1, 4-2, 4-3, 4-4, 4-5, 4-6, 4-7, 4-8, 4-9, 4-10, 4-11, 4-12, 4-13, 4-14, 4-15, 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23, 5-0, 5-1, 5-2, 5-3, 5-4, 5-5, 5-6, 5-7, 5-8, 5-9, 5-10, 5-11, 5-12, 5-13, 5-14, 5-15, 5-16, 5-17, 5-18, 5-19, 5-20, 5-21, 5-22, 5-23, 8-0, 8-1, 8-2, 8-3, 8-4, 8-5, 8-6, 8-7, 8-8, 8-9, 8-10, 8-11, 8-12, 8-13, 8-14, 8-15, 8-16, 8-17, 8-18, 8-19, 8-20, 8-21, 8-22, 8-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 20. number of IO-APIC #2 registers: 24. number of IO-APIC #3 registers: 24. number of IO-APIC #4 registers: 24. number of IO-APIC #5 registers: 24. number of IO-APIC #8 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02008000 ....... : physical APIC id: 02 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 00F 0F 0 0 0 0 0 1 1 39 02 00F 0F 0 0 0 0 0 1 1 31 03 00F 0F 0 0 0 0 0 1 1 41 04 00F 0F 0 0 0 0 0 1 1 49 05 00F 0F 0 0 0 0 0 1 1 51 06 00F 0F 0 0 0 0 0 1 1 59 07 00F 0F 0 0 0 0 0 1 1 61 08 00F 0F 0 0 0 0 0 1 1 69 09 00F 0F 0 0 0 0 0 1 1 71 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 00F 0F 0 0 0 0 0 1 1 79 0d 00F 0F 0 0 0 0 0 1 1 81 0e 00F 0F 0 0 0 0 0 1 1 89 0f 00F 0F 0 0 0 0 0 1 1 91 10 00F 0F 1 1 0 1 0 1 1 99 11 000 00 1 0 0 0 0 0 0 00 12 00F 0F 1 1 0 1 0 1 1 A1 13 00F 0F 1 1 0 1 0 1 1 A9 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #3...... .... register #00: 03000000 ....... : physical APIC id: 03 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 03000000 ....... : arbitration: 03 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 00F 0F 1 1 0 1 0 1 1 B1 05 00F 0F 1 1 0 1 0 1 1 B9 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #5...... .... register #00: 05000000 ....... : physical APIC id: 05 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 05000000 ....... : arbitration: 05 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IO APIC #8...... .... register #00: 08000000 ....... : physical APIC id: 08 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 08000000 ....... : arbitration: 08 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 000 00 1 0 0 0 0 0 0 00 02 000 00 1 0 0 0 0 0 0 00 03 000 00 1 0 0 0 0 0 0 00 04 000 00 1 0 0 0 0 0 0 00 05 000 00 1 0 0 0 0 0 0 00 06 000 00 1 0 0 0 0 0 0 00 07 000 00 1 0 0 0 0 0 0 00 08 000 00 1 0 0 0 0 0 0 00 09 000 00 1 0 0 0 0 0 0 00 0a 000 00 1 0 0 0 0 0 0 00 0b 000 00 1 0 0 0 0 0 0 00 0c 000 00 1 0 0 0 0 0 0 00 0d 000 00 1 0 0 0 0 0 0 00 0e 000 00 1 0 0 0 0 0 0 00 0f 000 00 1 0 0 0 0 0 0 00 10 000 00 1 0 0 0 0 0 0 00 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 000 00 1 0 0 0 0 0 0 00 15 000 00 1 0 0 0 0 0 0 00 16 000 00 1 0 0 0 0 0 0 00 17 000 00 1 0 0 0 0 0 0 00 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ28 -> 1:4 IRQ29 -> 1:5 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2399.3316 MHz. ..... host bus clock speed is 133.2961 MHz. cpu: 0, clocks: 1332961, slice: 266592 CPU0 cpu: 1, clocks: 1332961, slice: 266592 cpu: 3, clocks: 1332961, slice: 266592 cpu: 2, clocks: 1332961, slice: 266592 CPU1 CPU2 CPU3 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0xe) All processors have done init_idle mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs PCI: PCI BIOS revision 2.10 entry at 0xfd935, last bus=7 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router PIIX [8086/2480] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B3,I2,P0) -> 28 PCI->APIC IRQ transform: (B3,I2,P1) -> 29 PCI->APIC IRQ transform: (B7,I1,P0) -> 16 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized tbxface-0099 [01] Acpi_load_tables : ACPI Tables successfully loaded Parsing Methods:............................................................................................................. 109 Control Methods found and parsed (348 nodes total) ACPI Namespace successfully loaded at root c0344a00 ACPI: Core Subsystem version [20011018] evxfevnt-0081 [-11] Acpi_enable : Transition to ACPI mode successful Executing device _INI methods:............................................... 47 Devices found: 47 _STA, 0 _INI Completing Region and Field initialization:........ 8/12 Regions, 0/0 Fields initialized (348 nodes total) ACPI: Subsystem enabled Detected PS/2 Mouse Port. pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller on PCI bus 00 dev f9 PCI: Enabling device 00:1f.1 (0005 -> 0007) PCI: No IRQ known for interrupt pin A of device 00:1f.1. Probably buggy MP table. ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2060-0x2067, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x2068-0x206f, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 6Y060L0, ATA DISK drive hdb: WDC WD800JB-00CRA1, ATA DISK drive hdc: MATSHITA CR-177, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue c0372de4, I/O limit 4095Mb (mask 0xffffffff) hda: 120103200 sectors (61493 MB) w/2048KiB Cache, CHS=7476/255/63, UDMA(100) blk: queue c0372f30, I/O limit 4095Mb (mask 0xffffffff) hdb: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=9729/255/63, UDMA(100) ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdb: hdb1 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize ide-floppy driver 0.99.newide md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 122k freed VFS: Mounted root (ext2 filesystem). Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 140k freed Adding Swap: 2040244k swap-space (priority -1) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 01:50:17 Mar 19 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0x2000, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0x2020, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0x2040, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,65), internal journal EXT3-fs: mounted filesystem with ordered data mode. ide-floppy driver 0.99.newide hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12