From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory McLean Subject: Dmesg output. Date: Wed, 20 Aug 2003 11:39:59 -0400 Sender: linux-smp-owner@vger.kernel.org Message-ID: <3F43964F.2030008@gxsnmp.org> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------040606090408020204020005" Return-path: List-Id: To: linux-smp@vger.kernel.org This is a multi-part message in MIME format. --------------040606090408020204020005 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Attached find the complete boot log. This is from an Intel Desktop board , D865PERL (http://www.intel.com/support/motherboards/desktop/d865perl/index.htm) --- IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org --- --------------040606090408020204020005 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.4.20 (root@developer.gxsnmp.org) (gcc version 3.2 20020903 (Red Hat Linux 8.0 3.2-7)) #2 SMP Sun Feb 23 16:54:09 EST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ff30000 (usable) BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data) BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 hm, page 000ff000 reserved twice. hm, page 00100000 reserved twice. hm, page 000fc000 reserved twice. hm, page 000fd000 reserved twice. On node 0 totalpages: 261936 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 32560 pages. ACPI: Searched entire block, no RSDP was found. ACPI: RSDP located at physical address c00f5b40 RSD PTR v0 [ACPIAM] __va_range(0x3ff30000, 0x68): idx=8 mapped at ffff6000 ACPI table found: RSDT v1 [INTEL D865PERL 8195.1813] __va_range(0x3ff30200, 0x24): idx=8 mapped at ffff6000 __va_range(0x3ff30200, 0x81): idx=8 mapped at ffff6000 ACPI table found: FACP v2 [INTEL D865PERL 8195.1813] __va_range(0x3ff30300, 0x24): idx=8 mapped at ffff6000 __va_range(0x3ff30300, 0x68): idx=8 mapped at ffff6000 ACPI table found: APIC v1 [INTEL D865PERL 8195.1813] __va_range(0x3ff30300, 0x68): idx=8 mapped at ffff6000 LAPIC (acpi_id[0x0001] id[0x0] enabled[1]) CPU 0 (0x0000) enabledProcessor #0 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC_NMI (acpi_id[0x0001] polarity[0x0] trigger[0x0] lint[0x1]) LAPIC (acpi_id[0x0002] id[0x1] enabled[1]) CPU 1 (0x0100) enabledProcessor #1 Pentium 4(tm) XEON(tm) APIC version 16 LAPIC_NMI (acpi_id[0x0002] polarity[0x0] trigger[0x0] lint[0x1]) IOAPIC (id[0x2] address[0xfec00000] global_irq_base[0x0]) INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0]) INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x1] trigger[0x3]) 2 CPUs total Local APIC address fee00000 __va_range(0x3ff34490, 0x24): idx=8 mapped at ffff6000 __va_range(0x3ff34490, 0x99): idx=8 mapped at ffff6000 ACPI table found: ASF! v16 [LEGEND I865PASF 0.1] ACPI: Unsupported table ASF! __va_range(0x3ff34529, 0x24): idx=8 mapped at ffff6000 __va_range(0x3ff34529, 0x40): idx=8 mapped at ffff6000 ACPI table found: WDDT v1 [INTEL OEMWDDT 0.1] ACPI: Unsupported table WDDT Enabling the CPU's according to the ACPI table Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000 I/O APIC #2 Version 32 at 0xFEC00000. Processors: 2 Kernel command line: ro root=LABEL=/1 append="hdd=ide-scsi" Initializing CPU#0 Detected 2394.050 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 4771.02 BogoMIPS Memory: 1032456k/1047744k available (1303k kernel code, 14900k reserved, 474k data, 120k init, 130240k highmem) Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes) Page-cache hash table entries: 262144 (order: 8, 1048576 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 per-CPU timeslice cutoff: 1462.29 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4784.12 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU: After generic, caps: bfebfbff 00000000 00000000 00000000 CPU: Common caps: bfebfbff 00000000 00000000 00000000 CPU1: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09 Total of 2 processors activated (9555.14 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-21 not connected. ..TIMER: vector=0x31 pin1=2 pin2=0 number of MP IRQ sources: 26. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 .... register #01: 00178020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0020 .... register #02: 00178020 ....... : arbitration: 00 WARNING: unexpected IO-APIC, please mail to linux-smp@vger.kernel.org .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 003 03 0 0 0 0 0 1 1 39 02 003 03 0 0 0 0 0 1 1 31 03 003 03 0 0 0 0 0 1 1 41 04 003 03 0 0 0 0 0 1 1 49 05 003 03 0 0 0 0 0 1 1 51 06 003 03 0 0 0 0 0 1 1 59 07 003 03 0 0 0 0 0 1 1 61 08 003 03 0 0 0 0 0 1 1 69 09 003 03 1 1 0 0 0 1 1 71 0a 003 03 0 0 0 0 0 1 1 79 0b 003 03 0 0 0 0 0 1 1 81 0c 003 03 0 0 0 0 0 1 1 89 0d 003 03 0 0 0 0 0 1 1 91 0e 003 03 0 0 0 0 0 1 1 99 0f 003 03 0 0 0 0 0 1 1 A1 10 003 03 1 1 0 1 0 1 1 A9 11 003 03 1 1 0 1 0 1 1 B1 12 003 03 1 1 0 1 0 1 1 B9 13 003 03 1 1 0 1 0 1 1 C1 14 003 03 1 1 0 1 0 1 1 C9 15 000 00 1 0 0 0 0 0 0 00 16 003 03 1 1 0 1 0 1 1 D1 17 003 03 1 1 0 1 0 1 1 D9 IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ18 -> 0:18 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2393.9844 MHz. ..... host bus clock speed is 199.4984 MHz. cpu: 0, clocks: 1994984, slice: 664994 CPU0 cpu: 1, clocks: 1994984, slice: 664994 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2 PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI: Using IRQ router default [8086/24d0] at 00:1f.0 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P1) -> 19 PCI->APIC IRQ transform: (B0,I29,P2) -> 18 PCI->APIC IRQ transform: (B0,I29,P0) -> 16 PCI->APIC IRQ transform: (B0,I29,P3) -> 23 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P0) -> 18 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B0,I31,P1) -> 17 PCI->APIC IRQ transform: (B1,I0,P0) -> 16 PCI->APIC IRQ transform: (B2,I1,P0) -> 22 PCI->APIC IRQ transform: (B2,I7,P0) -> 17 PCI->APIC IRQ transform: (B2,I8,P0) -> 20 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16) apm: disabled - APM is not SMP safe. Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Diskquotas version dquot_6.4.0 initialized Journalled Block Device driver loaded pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled Real Time Clock Driver v1.10e Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=24db PCI: Device 00:1f.1 not available because of resource collisions PCI_IDE: BIOS setup was incomplete. PCI_IDE: chipset revision 2 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA PCI_IDE: unknown IDE controller on PCI bus 00 device fa, VID=8086, DID=24d1 PCI_IDE: chipset revision 2 PCI_IDE: 100% native mode on irq 18 ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio hda: WDC WD1200BB-32CAA0, ATA DISK drive hdb: WDC WD200EB-11CSF0, ATA DISK drive hdc: LITE-ON LTR-12101B, ATAPI CD/DVD-ROM drive hdd: PIONEER DVD-RW DVR-104, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=232581/16/63 hdb: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63 Partition check: hda: [PTBL] [14593/255/63] hda1 hda2 hda3 hda4 < hda5 > hdb: [PTBL] [2434/255/63] hdb1 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 NET4: Frame Diverter 0.46 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 67k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 120k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 16:43:45 Feb 23 2003 usb-uhci.c: High bandwidth mode enabled PCI: Setting latency timer of device 00:1d.0 to 64 usb-uhci.c: USB UHCI at I/O 0xcc00, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.1 to 64 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 19 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.2 to 64 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 18 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected PCI: Setting latency timer of device 00:1d.3 to 64 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 16 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 4 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Setting latency timer of device 00:1d.7 to 64 hcd.c: ehci-hcd @ 00:1d.7, PCI device 8086:24dd (Intel Corp.) hcd.c: irq 23, pci mem f8874c00 usb.c: new USB bus registered, assigned bus number 5 ehci-hcd.c: restricting 64bit DMA mappings to segment 0 ... ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0 hub.c: USB hub found hub.c: 8 ports detected usb.c: registered new driver hiddev usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers mice: PS/2 mouse device common for all mice hub.c: connect-debounce failed, port 1 disabled EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal Adding Swap: 522072k swap-space (priority -1) hub.c: new USB device 00:1d.0-1, assigned address 2 input0: USB HID v1.10 Joystick [Logitech WingMan Precision USB] on usb1:2.0 hub.c: new USB device 00:1d.0-2, assigned address 3 usb-uhci.c: interrupt, status 2, frame# 951 kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 578 $ Ben Collins ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[feaff000-feaff7ff] Max Packet=[2048] ieee1394: Host added: Node[00:1023] GUID[0007e90000268717] [Linux OHCI-1394] ide-cd: ignoring drive hdc ide-cd: ignoring drive hdd SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: LITE-ON Model: LTR-12101B Rev: LS39 Type: CD-ROM ANSI SCSI revision: 02 Vendor: PIONEER Model: DVD-RW DVR-104 Rev: 1.32 Type: CD-ROM ANSI SCSI revision: 02 blk: queue c034d024, I/O limit 4095Mb (mask 0xffffffff) blk: queue c034d170, I/O limit 4095Mb (mask 0xffffffff) usb_control/bulk_msg: timeout input1: USB HID v1.00 Mouse [Kensington USB Input Device] on usb1:3.0 --------------040606090408020204020005--