From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bernd Strebel Subject: unexpected IO-APIC Date: Thu, 26 May 2005 10:44:46 +0200 Message-ID: <42958C7E.8070307@digitec.de> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------090203000104070602000102" Return-path: Sender: linux-smp-owner@vger.kernel.org List-Id: To: linux-smp@vger.kernel.org This is a multi-part message in MIME format. --------------090203000104070602000102 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org -- Best Regards Bernd Strebel digitec GmbH Frankenstr. 3 D-20097 Hamburg Germany Tel: +49 40 23776-155 Fax: +49 40 230508 --------------090203000104070602000102 Content-Type: text/plain; name="pax-noexec-disabled.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="pax-noexec-disabled.txt" Linux version 2.4.30.digitec.20050524 (root@ucs) (gcc version 3.3.2 20030908 (Debian prerelease)) #1 SMP Tue May 24 15:43:06 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009a000 (usable) BIOS-e820: 000000000009a000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ff70000 (usable) BIOS-e820: 000000007ff70000 - 000000007ff77000 (ACPI data) BIOS-e820: 000000007ff77000 - 000000007ff80000 (ACPI NVS) BIOS-e820: 000000007ff80000 - 0000000080000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec00400 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f7d40 hm, page 000f7000 reserved twice. hm, page 000f8000 reserved twice. hm, page 0009a000 reserved twice. hm, page 0009b000 reserved twice. On node 0 totalpages: 524144 zone(0): 4096 pages. zone(1): 225280 pages. zone(2): 294768 pages. ACPI: RSDP (v002 PTLTD ) @ 0x000f7cc0 ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x7ff74ddf ACPI: FADT (v003 SUN V20z 0x06040000 PTEC 0x000f4240) @ 0x7ff76c44 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7ff76d38 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x7ff76dae ACPI: SRAT (v001 SUN V20z 0x06040000 SUN 0x00000001) @ 0x7ff76dfe ACPI: SSDT (v001 SUN V20z 0x06040000 LTP 0x00000001) @ 0x7ff76ec6 ACPI: SSDT (v001 SUN V20z 0x06040000 LTP 0x00000001) @ 0x7ff76f63 ACPI: DSDT (v001 SUN V20z 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 Unknown CPU [15:5] APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 Unknown CPU [15:5] APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: SUN Product ID: SunFire V20z APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. I/O APIC #3 Version 17 at 0xFD000000. I/O APIC #4 Version 17 at 0xFD001000. Enabling APIC mode: Flat. Using 3 I/O APICs Processors: 2 Kernel command line: auto BOOT_IMAGE=Linux ro root=807 pci=noacpi splash=silent root2fstype=ext3 console=ttyS0,9600 console=tty0 Initializing CPU#0 Detected 2191.123 MHz processor. Console: colour dummy device 80x25 Calibrating delay loop... 4364.69 BogoMIPS Memory: 2065024k/2096576k available (2174k kernel code, 31144k reserved, 367k data, 132k init, 1179072k highmem) Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode cache hash table entries: 131072 (order: 8, 1048576 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 131072 (order: 7, 524288 bytes) Page-cache hash table entries: 524288 (order: 9, 2097152 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Edge set to Level Trigger. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check reporting enabled on CPU#0. CPU0: AMD Opteron(tm) Processor 248 stepping 08 per-CPU timeslice cutoff: 2924.82 usecs. masked ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 3000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 4377.80 BogoMIPS CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) Intel machine check reporting enabled on CPU#1. CPU1: AMD Opteron(tm) Processor 248 stepping 08 Total of 2 processors activated (8742.50 BogoMIPS). ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 testing the IO APIC....................... An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org An unexpected IO-APIC was found. If this kernel release is less than three months old please report this to linux-smp@vger.kernel.org .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2191.0455 MHz. ..... host bus clock speed is 199.1859 MHz. cpu: 0, clocks: 1991859, slice: 663953 CPU0 cpu: 1, clocks: 1991859, slice: 663953 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xfd821, last bus=3 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S5) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *5 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 5 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 10 *11) PCI: Probing PCI hardware PCI: Using IRQ router default [1022/746b] at 00:07.3 PCI->APIC IRQ transform: (B1,I0,P3) -> 19 PCI->APIC IRQ transform: (B1,I0,P3) -> 19 PCI->APIC IRQ transform: (B1,I5,P0) -> 17 PCI->APIC IRQ transform: (B2,I2,P0) -> 25 PCI->APIC IRQ transform: (B2,I3,P0) -> 26 PCI->APIC IRQ transform: (B2,I4,P0) -> 27 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd allocated 32 pages and 32 bhs reserved for the highmem bounces VFS: Disk quotas vdquot_6.5.1 Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@monad.swb.de). SGI XFS with no debug enabled SGI XFS Quota Management subsystem vesafb: framebuffer at 0xfe000000, mapped to 0xf8826000, size 1200k vesafb: mode is 640x480x16, linelength=1280, pages=11 vesafb: protected mode interface info at c000:16ac vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 80x30 fb0: VESA VGA frame buffer device vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Real Time Clock Driver v1.10f Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 COMX: driver version 0.85 (C) 1995-1999 ITConsult-Pro Co. RAMDISK driver initialized: 16 RAM disks of 32768K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hdc: CD-224E, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hdc: attached ide-cdrom driver. hdc: ATAPI 24X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 SCSI subsystem driver Revision: 1.00 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2 Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 16384 buckets, 128Kbytes TCP: Hash tables configured (established 262144 bind 65536) Linux IP multicast router 0.06 plus PIM-SM NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. RAMDISK: Compressed image found at block 0 Freeing initrd memory: 2982k freed VFS: Mounted root (ext2 filesystem). Freeing unused kernel memory: 132k freed usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xf896b000, IRQ 19 usb-ohci.c: usb-01:00.0, Advanced Micro Devices [AMD] AMD-8111 USB usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xf896d000, IRQ 19 usb-ohci.c: usb-01:00.1, Advanced Micro Devices [AMD] AMD-8111 USB (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected amd768_rng: AMD768 system management I/O registers at 0x8000. amd768_rng hardware driver 0.1.0 loaded Fusion MPT base driver 2.05.16 Copyright (c) 1999-2004 LSI Logic Corporation mptbase: Initiating ioc0 bringup ioc0: 53C1030: Capabilities={Initiator} mptbase: 1 MPT adapter found, 1 installed. Fusion MPT SCSI Host driver 2.05.16 scsi0 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=222, IRQ=27 blk: queue f7b0ee18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Vendor: SEAGATE Model: ST373307LC Rev: 0007 Type: Direct-Access ANSI SCSI revision: 03 blk: queue f7b0ea18, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Vendor: FUJITSU Model: MAN3184M SUN18G Rev: 1502 Type: Direct-Access ANSI SCSI revision: 02 blk: queue f7b0e618, I/O limit 4294967295Mb (mask 0xffffffffffffffff) Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 SCSI device sda: 143374744 512-byte hdwr sectors (73408 MB) Partition check: sda: sda1 sda2 sda3 < sda5 sda6 sda7 > SCSI device sdb: 35378533 512-byte hdwr sectors (18114 MB) sdb: sdb1 tg3.c:v3.25 (March 24, 2005) eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:09:3d:10:3c:2a eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:09:3d:10:3c:2b eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[0] usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik hid-core.c: USB HID support drivers kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding Swap: 1951856k swap-space (priority -1) EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,7), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,17), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on sd(8,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (8192 buckets, 65536 max) - 288 bytes per conntrack tg3: eth0: Link is up at 100 Mbps, half duplex. tg3: eth0: Flow control is off for TX and off for RX. UCS 1.2-4 ucs ttyS0 Debian GNU/Linux 3.0 ucs login: --------------090203000104070602000102--