linux-snps-arc.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Vineet.Gupta1@synopsys.com (Vineet Gupta)
To: linux-snps-arc@lists.infradead.org
Subject: [PATCH 6/9] ARC: clocksource: DT based probe
Date: Tue, 2 Feb 2016 16:28:56 +0530	[thread overview]
Message-ID: <1454410739-24444-7-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1454410739-24444-1-git-send-email-vgupta@synopsys.com>

- Remove explicit clocksource setup and let it be done by OF framework
  by defining CLOCKSOURCE_OF_DECLARE() for various timers

- This allows multiple clocksources to be potentially registered
  simultaneouly: previously we could only do one - as all of them had
  same arc_counter_setup() routine for registration

- Setup routines also ensure that the underlying timer actually exists.

- Remove some of the panic() calls if underlying timer is NOT detcted as
  a fallback clocksource might still be available
  1. If GRFC doesn't exist, jiffies clocksource gets registered anyways
  2. if RTC doesn't exist, TIMER1 cetainly will take over (as it is
     always present)

Cc: Daniel Lezcano <daniel.lezcano at linaro.org>
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
---
 arch/arc/kernel/mcip.c  |   4 +-
 arch/arc/kernel/setup.c |   3 --
 arch/arc/kernel/time.c  | 111 +++++++++++++++++++++++++-----------------------
 3 files changed, 60 insertions(+), 58 deletions(-)

diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index bc771f58fefb..79c09d20c905 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -118,15 +118,13 @@ static void mcip_probe_n_setup(void)
 		IS_AVAIL1(mp.dbg, "DEBUG "),
 		IS_AVAIL1(mp.gfrc, "GFRC"));
 
+	cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
 	idu_detected = mp.idu;
 
 	if (mp.dbg) {
 		__mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
 		__mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
 	}
-
-	if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc)
-		panic("kernel trying to use non-existent GFRC\n");
 }
 
 struct plat_smp_ops plat_smp_ops = {
diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c
index 8129c8e8f20b..953068e9c9e1 100644
--- a/arch/arc/kernel/setup.c
+++ b/arch/arc/kernel/setup.c
@@ -304,9 +304,6 @@ static void arc_chk_core_config(void)
 	if (!cpu->extn.timer1)
 		panic("Timer1 is not present!\n");
 
-	if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc)
-		panic("RTC is not present\n");
-
 #ifdef CONFIG_ARC_HAS_DCCM
 	/*
 	 * DCCM can be arbit placed in hardware.
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index 43ef22853473..0987de53ed95 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -77,12 +77,7 @@ static void noinline arc_get_timer_clk(struct device_node *node)
 
 #ifdef CONFIG_ARC_HAS_GFRC
 
-static int arc_counter_setup(void)
-{
-	return 1;
-}
-
-static cycle_t arc_counter_read(struct clocksource *cs)
+static cycle_t arc_read_gfrc(struct clocksource *cs)
 {
 	unsigned long flags;
 	union {
@@ -107,15 +102,28 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 	return stamp.full;
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_gfrc = {
 	.name   = "ARConnect GFRC",
 	.rating = 400,
-	.read   = arc_counter_read,
+	.read   = arc_read_gfrc,
 	.mask   = CLOCKSOURCE_MASK(64),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#else
+static void __init arc_cs_setup_gfrc(struct device_node *node)
+{
+	int exists = cpuinfo_arc700[0].extn.gfrc;
+
+	if (WARN(!exists, "Global-64-bit-Ctr clocksource not detected"))
+		return;
+
+	arc_get_timer_clk(node);
+
+	clocksource_register_hz(&arc_counter_gfrc, arc_timer_freq);
+}
+CLOCKSOURCE_OF_DECLARE(arc_gfrc, "snps,archs-timer-gfrc", arc_cs_setup_gfrc);
+
+#endif
 
 #ifdef CONFIG_ARC_HAS_RTC
 
@@ -123,15 +131,7 @@ static struct clocksource arc_counter = {
 #define AUX_RTC_LOW	0x104
 #define AUX_RTC_HIGH	0x105
 
-int arc_counter_setup(void)
-{
-	write_aux_reg(AUX_RTC_CTRL, 1);
-
-	/* Not usable in SMP */
-	return !IS_ENABLED(CONFIG_SMP);
-}
-
-static cycle_t arc_counter_read(struct clocksource *cs)
+static cycle_t arc_read_rtc(struct clocksource *cs)
 {
 	unsigned long status;
 	union {
@@ -155,44 +155,67 @@ static cycle_t arc_counter_read(struct clocksource *cs)
 	return stamp.full;
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_rtc = {
 	.name   = "ARCv2 RTC",
 	.rating = 350,
-	.read   = arc_counter_read,
+	.read   = arc_read_rtc,
 	.mask   = CLOCKSOURCE_MASK(64),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#else /* !CONFIG_ARC_HAS_RTC */
-
-/*
- * set 32bit TIMER1 to keep counting monotonically and wraparound
- */
-int arc_counter_setup(void)
+static void __init arc_cs_setup_rtc(struct device_node *node)
 {
-	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
-	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
-	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
+	int exists = cpuinfo_arc700[smp_processor_id()].extn.rtc;
+
+	if (WARN(!exists, "Local-64-bit-Ctr clocksource not detected"))
+		return;
+
+	/* Local to CPU hence not usable in SMP */
+	if (WARN(IS_ENABLED(CONFIG_SMP), "Local-64-bit-Ctr not usable in SMP"))
+		return;
 
-	/* Not usable in SMP */
-	return !IS_ENABLED(CONFIG_SMP);
+	arc_get_timer_clk(node);
+
+	write_aux_reg(AUX_RTC_CTRL, 1);
+
+	clocksource_register_hz(&arc_counter_rtc, arc_timer_freq);
 }
+CLOCKSOURCE_OF_DECLARE(arc_rtc, "snps,archs-timer-rtc", arc_cs_setup_rtc);
+
+#endif
 
-static cycle_t arc_counter_read(struct clocksource *cs)
+/*
+ * 32bit TIMER1 to keep counting monotonically and wraparound
+ */
+
+static cycle_t arc_read_timer1(struct clocksource *cs)
 {
 	return (cycle_t) read_aux_reg(ARC_REG_TIMER1_CNT);
 }
 
-static struct clocksource arc_counter = {
+static struct clocksource arc_counter_timer1 = {
 	.name   = "ARC Timer1",
 	.rating = 300,
-	.read   = arc_counter_read,
+	.read   = arc_read_timer1,
 	.mask   = CLOCKSOURCE_MASK(32),
 	.flags  = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-#endif
-#endif
+static void __init arc_cs_setup_timer1(struct device_node *node)
+{
+	/* Local to CPU hence not usable in SMP */
+	if (IS_ENABLED(CONFIG_SMP))
+		return;
+
+	arc_get_timer_clk(node);
+
+	write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
+	write_aux_reg(ARC_REG_TIMER1_CNT, 0);
+	write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
+
+	clocksource_register_hz(&arc_counter_timer1, arc_timer_freq);
+}
+CLOCKSOURCE_OF_DECLARE(arc_timer1, "snps,arc-timer1", arc_cs_setup_timer1);
 
 /********** Clock Event Device *********/
 
@@ -317,25 +340,9 @@ CLOCKSOURCE_OF_DECLARE(arc_clkevt, "snps,arc-timer0", arc_clockevent_setup);
 
 /*
  * Called from start_kernel() - boot CPU only
- *
- * -Sets up h/w timers as applicable on boot cpu
- * -Also sets up any global state needed for timer subsystem:
- *    - for "counting" timer, registers a clocksource, usable across CPUs
- *      (provided that underlying counter h/w is synchronized across cores)
  */
 void __init time_init(void)
 {
 	of_clk_init(NULL);
 	clocksource_probe();
-
-	/*
-	 * sets up the timekeeping free-flowing counter which also returns
-	 * whether the counter is usable as clocksource
-	 */
-	if (arc_counter_setup())
-		/*
-		 * CLK upto 4.29 GHz can be safely represented in 32 bits
-		 * because Max 32 bit number is 4,294,967,295
-		 */
-		clocksource_register_hz(&arc_counter, arc_timer_freq);
 }
-- 
2.5.0

  parent reply	other threads:[~2016-02-02 10:58 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-02 10:58 [PATCH 0/9] ARC clockevent/clocksource modernization Vineet Gupta
2016-02-02 10:58 ` [PATCH 1/9] ARC: [dts] Add clk feeding into timers to DTs Vineet Gupta
2016-02-02 10:58 ` [PATCH 2/9] ARC: [dts] Introduce Timer bindings Vineet Gupta
2016-02-02 12:48   ` Alexey Brodkin
2016-02-02 13:15   ` Alexey Brodkin
2016-02-02 14:29     ` Vineet Gupta
2016-02-02 15:36       ` Alexey Brodkin
2016-02-02 22:57         ` Alexey Brodkin
2016-02-03 13:44           ` Alexey Brodkin
2016-02-03 13:50             ` Alexey Brodkin
2016-02-02 22:03   ` Rob Herring
2016-02-03  8:04     ` Vineet Gupta
2016-02-03 15:39       ` Rob Herring
2016-02-16  8:44         ` Vineet Gupta
2016-02-02 10:58 ` [PATCH 3/9] ARC: clockevent: switch to cpu notifier for clockevent setup Vineet Gupta
2016-02-02 10:58 ` [PATCH 4/9] ARC: clockevent: Prepare for DT based probe Vineet Gupta
2016-02-02 10:58 ` [PATCH 5/9] ARC: clockevent: " Vineet Gupta
2016-02-02 10:58 ` Vineet Gupta [this message]
2016-02-08 12:10   ` [PATCH 6/9] ARC: clocksource: " Daniel Lezcano
2016-02-08 12:23     ` Vineet Gupta
2016-02-10 13:38       ` Daniel Lezcano
2016-02-02 10:58 ` [PATCH 7/9] ARC: use fixed frequencies in arc_set_early_base_baud() Vineet Gupta
2016-02-02 12:53   ` Alexey Brodkin
2016-02-02 13:43     ` christian.ruppert
2016-02-02 14:26       ` Alexey Brodkin
2016-02-02 10:58 ` [PATCH 8/9] ARC: [plat-axs] Don't use arc_{get|set}_core_freq() for manipulating core clk Vineet Gupta
2016-02-02 10:58 ` [PATCH 9/9] ARC: RIP arc_{get|set}_core_freq() clk API Vineet Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454410739-24444-7-git-send-email-vgupta@synopsys.com \
    --to=vineet.gupta1@synopsys.com \
    --cc=linux-snps-arc@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).