From: Vineet.Gupta1@synopsys.com (Vineet Gupta)
To: linux-snps-arc@lists.infradead.org
Subject: [PATCH v2 09/10] ARC: breakout timer include code into separate header ...
Date: Thu, 3 Nov 2016 14:31:40 -0700 [thread overview]
Message-ID: <1478208701-30923-10-git-send-email-vgupta@synopsys.com> (raw)
In-Reply-To: <1478208701-30923-1-git-send-email-vgupta@synopsys.com>
... which allows for use in drivers/clocksource later
Signed-off-by: Vineet Gupta <vgupta at synopsys.com>
---
arch/arc/include/asm/arcregs.h | 9 +--------
arch/arc/kernel/time.c | 18 +++---------------
include/soc/arc/timers.h | 38 ++++++++++++++++++++++++++++++++++++++
3 files changed, 42 insertions(+), 23 deletions(-)
create mode 100644 include/soc/arc/timers.h
diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h
index ccf5dc96713b..a17aa4558832 100644
--- a/arch/arc/include/asm/arcregs.h
+++ b/arch/arc/include/asm/arcregs.h
@@ -20,7 +20,6 @@
#define ARC_REG_FP_V2_BCR 0xc8 /* ARCv2 FPU */
#define ARC_REG_SLC_BCR 0xce
#define ARC_REG_DCCM_BUILD 0x74 /* DCCM size (common) */
-#define ARC_REG_TIMERS_BCR 0x75
#define ARC_REG_AP_BCR 0x76
#define ARC_REG_ICCM_BUILD 0x78 /* ICCM size (common) */
#define ARC_REG_XY_MEM_BCR 0x79
@@ -206,13 +205,7 @@ struct bcr_fp_arcv2 {
#endif
};
-struct bcr_timer {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8;
-#else
- unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15;
-#endif
-};
+#include <soc/arc/timers.h>
struct bcr_bpu_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c
index f0b6e6bc1e36..878c71dda8b9 100644
--- a/arch/arc/kernel/time.c
+++ b/arch/arc/kernel/time.c
@@ -38,22 +38,10 @@
#include <linux/of.h>
#include <linux/of_irq.h>
#include <asm/irq.h>
-#include <asm/arcregs.h>
+#include <soc/arc/timers.h>
#include <soc/arc/mcip.h>
-/* Timer related Aux registers */
-#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
-#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
-#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
-#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
-#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
-#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
-
-#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
-#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
-
-#define ARC_TIMER_MAX 0xFFFFFFFF
static unsigned long arc_timer_freq;
@@ -218,7 +206,7 @@ static int __init arc_cs_setup_timer1(struct device_node *node)
if (ret)
return ret;
- write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMER_MAX);
+ write_aux_reg(ARC_REG_TIMER1_LIMIT, ARC_TIMERN_MAX);
write_aux_reg(ARC_REG_TIMER1_CNT, 0);
write_aux_reg(ARC_REG_TIMER1_CTRL, TIMER_CTRL_NH);
@@ -296,7 +284,7 @@ static int arc_timer_starting_cpu(unsigned int cpu)
evt->cpumask = cpumask_of(smp_processor_id());
- clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMER_MAX);
+ clockevents_config_and_register(evt, arc_timer_freq, 0, ARC_TIMERN_MAX);
enable_percpu_irq(arc_timer_irq, 0);
return 0;
}
diff --git a/include/soc/arc/timers.h b/include/soc/arc/timers.h
new file mode 100644
index 000000000000..a20ed2fbc432
--- /dev/null
+++ b/include/soc/arc/timers.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2016-17 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_ARC_TIMERS_H
+#define __SOC_ARC_TIMERS_H
+
+#include <soc/arc/aux.h>
+
+/* Timer related Aux registers */
+#define ARC_REG_TIMER0_LIMIT 0x23 /* timer 0 limit */
+#define ARC_REG_TIMER0_CTRL 0x22 /* timer 0 control */
+#define ARC_REG_TIMER0_CNT 0x21 /* timer 0 count */
+#define ARC_REG_TIMER1_LIMIT 0x102 /* timer 1 limit */
+#define ARC_REG_TIMER1_CTRL 0x101 /* timer 1 control */
+#define ARC_REG_TIMER1_CNT 0x100 /* timer 1 count */
+
+/* CTRL reg bits */
+#define TIMER_CTRL_IE (1 << 0) /* Interrupt when Count reaches limit */
+#define TIMER_CTRL_NH (1 << 1) /* Count only when CPU NOT halted */
+
+#define ARC_TIMERN_MAX 0xFFFFFFFF
+
+#define ARC_REG_TIMERS_BCR 0x75
+
+struct bcr_timer {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad2:15, rtsc:1, pad1:5, rtc:1, t1:1, t0:1, ver:8;
+#else
+ unsigned int ver:8, t0:1, t1:1, rtc:1, pad1:5, rtsc:1, pad2:15;
+#endif
+};
+
+#endif
--
2.7.4
next prev parent reply other threads:[~2016-11-03 21:31 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-11-03 21:31 [PATCH v2 00/10] Move ARC timer code into drivers/clocksource/ Vineet Gupta
2016-11-03 21:31 ` [PATCH v2 01/10] ARC: timer: rtc: implement read loop in "C" vs. inline asm Vineet Gupta
2016-11-03 21:52 ` Daniel Lezcano
2016-11-03 22:23 ` Vineet Gupta
2016-11-03 22:35 ` Daniel Lezcano
2016-11-03 22:44 ` Vineet Gupta
2016-11-03 22:46 ` Daniel Lezcano
2016-11-04 17:58 ` Alexey Brodkin
2016-11-03 21:31 ` [PATCH v2 02/10] ARC: timer: gfrc, rtc: deuglify big endian code Vineet Gupta
2016-11-03 21:55 ` Daniel Lezcano
2016-11-03 22:15 ` Vineet Gupta
2016-11-04 18:11 ` Alexey Brodkin
2016-11-03 21:31 ` [PATCH v2 03/10] ARC: timer: gfrc, rtc: Read BCR to detect whether hardware exists Vineet Gupta
2016-11-03 21:31 ` [PATCH v2 04/10] ARC: timer: gfrc: boot print alongside other timers Vineet Gupta
2016-11-03 21:31 ` [PATCH v2 05/10] ARC: time: move time_init() out of the driver Vineet Gupta
2016-11-03 21:31 ` [PATCH v2 06/10] ARC: timer: Build gfrc, rtc under same option (64-bit timers) Vineet Gupta
2016-11-03 22:13 ` Daniel Lezcano
2016-11-03 21:31 ` [PATCH v2 07/10] ARC: breakout aux handling into a separate header Vineet Gupta
2016-11-03 21:31 ` [PATCH v2 08/10] ARC: move mcip.h into include/soc and adjust the includes Vineet Gupta
2016-11-03 21:31 ` Vineet Gupta [this message]
2016-11-03 21:31 ` [PATCH v2 10/10] clocksource: import ARC timer driver Vineet Gupta
2016-11-03 22:38 ` Daniel Lezcano
2016-11-03 22:50 ` Vineet Gupta
2016-11-03 23:01 ` Daniel Lezcano
2016-11-03 23:06 ` Vineet Gupta
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1478208701-30923-10-git-send-email-vgupta@synopsys.com \
--to=vineet.gupta1@synopsys.com \
--cc=linux-snps-arc@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).