[PATCH v4 0/2] adding PCI support to AXS10x

[PATCH v4 0/2] adding PCI support to AXS10x

[Joao Pinto]

This patch set has the goal to add suppport for DesignWare PCIe RC in ARC
AXS10x. It includes the necessary tweaks to the ARC architecture, necessary
tweaks to the PCI subsystem and a new driver (pcie-snpsdev).
This new driver will be used extensively in the PCIe RC Prototyping Kit.

The patches were produced against Bjorn Helgaas' repository. It was properly
tested in an IP Prototyping Kit.

Joao Pinto (2):
  PCI support added to ARC
  add new platform driver for PCI RC

 .../devicetree/bindings/pci/pcie-snpsdev.txt       |  33 +++
 MAINTAINERS                                        |   7 +
 arch/arc/Kconfig                                   |  23 ++
 arch/arc/include/asm/dma.h                         |   5 +
 arch/arc/include/asm/io.h                          |  10 +
 arch/arc/include/asm/pci.h                         |  43 ++++
 arch/arc/kernel/Makefile                           |   1 +
 arch/arc/kernel/pcibios.c                          |  55 ++++
 arch/arc/mm/ioremap.c                              |  10 +-
 arch/arc/plat-axs10x/Kconfig                       |   1 +
 drivers/pci/Makefile                               |   1 +
 drivers/pci/host/Kconfig                           |   8 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pcie-designware.c                 |  11 +
 drivers/pci/host/pcie-designware.h                 |   1 +
 drivers/pci/host/pcie-snpsdev.c                    | 286 +++++++++++++++++++++
 16 files changed, 495 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
 create mode 100644 arch/arc/include/asm/pci.h
 create mode 100644 arch/arc/kernel/pcibios.c
 create mode 100644 drivers/pci/host/pcie-snpsdev.c

-- 
1.8.1.5

[PATCH v4 1/2] PCI support added to ARC

[Joao Pinto]

This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
the ARC arch to use the generic PCI setup functions.

Signed-off-by: Joao Pinto <jpinto at synopsys.com>
---
Change v3 -> v4:
- Nothing changed (just to keep up with patch set version).
Change v2 -> v3 (Bjorn Helgaas):
- arch/arc/kernel/pcibios.c unused functions were removed and also the
arch/arc/include/asm/mach/pci.h was removed because was no longer necessary
Change v1 -> v2:
- In arch/arc/Kconfig, the new menu entry (Bus Configuration) was moved to the
slot between sourcing of drivers/Kconfig and fs/Kconfig (Vineet Gupta)
- In arch/arc/plat-axs10x/Kconfig the "select MIGHT_HAVE_PCI" option was placed
in order as suggested (Vineet Gupta)
- ioport_map() and ioport_unmap() were static inlined and included in
the io.h (Vineet Gupta)
- pcibios_min_io and pcibios_min_mem declaration moved to
pcibios.c (Vineet Gupta)
- pr_err() replaced by dev_err() in pcibios_enable_device() (Bjorn Helgaas)
- string simplified in pcibios_enable_device() (Vineet Gupta)
- pci_host_bridge_window structure was replaced by resource_entry structure, and
list_for_each_entry() for resource_list_for_each_entry() in pcibios.c

 arch/arc/Kconfig             | 23 ++++++++++++++++++
 arch/arc/include/asm/dma.h   |  5 ++++
 arch/arc/include/asm/io.h    | 10 ++++++++
 arch/arc/include/asm/pci.h   | 43 ++++++++++++++++++++++++++++++++++
 arch/arc/kernel/Makefile     |  1 +
 arch/arc/kernel/pcibios.c    | 55 ++++++++++++++++++++++++++++++++++++++++++++
 arch/arc/mm/ioremap.c        | 10 +++++++-
 arch/arc/plat-axs10x/Kconfig |  1 +
 drivers/pci/Makefile         |  1 +
 9 files changed, 148 insertions(+), 1 deletion(-)
 create mode 100644 arch/arc/include/asm/pci.h
 create mode 100644 arch/arc/kernel/pcibios.c

diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index 2c2ac3f..98b32c1 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -19,6 +19,7 @@ config ARC
 	select GENERIC_FIND_FIRST_BIT
 	# for now, we don't need GENERIC_IRQ_PROBE, CONFIG_GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_SHOW
+	select GENERIC_PCI_IOMAP
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
@@ -39,6 +40,9 @@ config ARC
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_STACKOVERFLOW
 
+config MIGHT_HAVE_PCI
+	bool
+
 config TRACE_IRQFLAGS_SUPPORT
 	def_bool y
 
@@ -570,6 +574,25 @@ endmenu	 # "ARC Architecture Configuration"
 source "mm/Kconfig"
 source "net/Kconfig"
 source "drivers/Kconfig"
+
+menu "Bus Support"
+
+config PCI
+	bool "PCI support" if MIGHT_HAVE_PCI
+	help
+	  PCI is the name of a bus system, i.e. the way the CPU talks to the other stuff inside
+	  your box.Find out if your board/platform have PCI.
+	  Note: PCIE support for Synopsys Device will be available only when
+	  HAPS DX is configured with PCIE RC bitmap. If you have PCI, say Y, otherwise N.
+
+config PCI_SYSCALL
+	def_bool PCI
+
+source "drivers/pci/Kconfig"
+source "drivers/pci/pcie/Kconfig"
+
+endmenu
+
 source "fs/Kconfig"
 source "arch/arc/Kconfig.debug"
 source "security/Kconfig"
diff --git a/arch/arc/include/asm/dma.h b/arch/arc/include/asm/dma.h
index ca7c451..37942fa 100644
--- a/arch/arc/include/asm/dma.h
+++ b/arch/arc/include/asm/dma.h
@@ -10,5 +10,10 @@
 #define ASM_ARC_DMA_H
 
 #define MAX_DMA_ADDRESS 0xC0000000
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
 
 #endif
diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
index 694ece8..2ec3cf4 100644
--- a/arch/arc/include/asm/io.h
+++ b/arch/arc/include/asm/io.h
@@ -16,7 +16,17 @@
 extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
 extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
 				  unsigned long flags);
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *)port;
+}
+
+static inline void ioport_unmap(void __iomem *addr)
+{
+}
+
 extern void iounmap(const void __iomem *addr);
+extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);
 
 #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
 #define ioremap_wc(phy, sz)		ioremap(phy, sz)
diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
new file mode 100644
index 0000000..a0a0fa5
--- /dev/null
+++ b/arch/arc/include/asm/pci.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_PCI_H
+#define _ASM_ARC_PCI_H
+
+#ifdef __KERNEL__
+#include <asm-generic/pci-dma-compat.h>
+#include <asm-generic/pci-bridge.h>
+
+#include <linux/ioport.h>
+
+extern unsigned long pcibios_min_io;
+#define PCIBIOS_MIN_IO pcibios_min_io
+extern unsigned long pcibios_min_mem;
+#define PCIBIOS_MIN_MEM pcibios_min_mem
+
+#define pcibios_assign_all_busses()	1
+/*
+ * The PCI address space does equal the physical memory address space.
+ * The networking and block device layers use this boolean for bounce
+ * buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+/*
+ * Setup early fixed I/O mapping.
+ */
+#if defined(CONFIG_PCI)
+extern void pci_map_io_early(unsigned long pfn);
+#else
+static inline void pci_map_io_early(unsigned long pfn) {}
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_ARC_PCI_H */
+
diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
index e7f3625..1bc2036 100644
--- a/arch/arc/kernel/Makefile
+++ b/arch/arc/kernel/Makefile
@@ -12,6 +12,7 @@ obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
 obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
 obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
 obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
+obj-$(CONFIG_PCI)  			+= pcibios.o
 
 obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
 obj-$(CONFIG_SMP) 			+= smp.o
diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c
new file mode 100644
index 0000000..99ee329
--- /dev/null
+++ b/arch/arc/kernel/pcibios.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/bootmem.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#include <asm/pci.h>
+
+unsigned long pcibios_min_io = 0x100;
+EXPORT_SYMBOL(pcibios_min_io);
+
+unsigned long pcibios_min_mem = 0x100000;
+EXPORT_SYMBOL(pcibios_min_mem);
+
+/*
+ * We don't have to worry about legacy ISA devices, so nothing to do here
+ */
+resource_size_t pcibios_align_resource(void *data, const struct resource *res,
+				resource_size_t size, resource_size_t align)
+{
+	return res->start;
+}
+
+/*
+ * If the bus contains any of these devices, then we must not turn on
+ * parity checking of any kind.  Currently this is CyberPro 20x0 only.
+ */
+static inline int pdev_bad_for_parity(struct pci_dev *dev)
+{
+	return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
+		 (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
+		  dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
+		(dev->vendor == PCI_VENDOR_ID_ITE &&
+		 dev->device == PCI_DEVICE_ID_ITE_8152));
+
+}
+
+void pcibios_fixup_bus(struct pci_bus *bus)
+{
+}
+EXPORT_SYMBOL(pcibios_fixup_bus);
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 739e65f..fe807b0 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -13,6 +13,7 @@
 #include <linux/mm.h>
 #include <linux/slab.h>
 #include <linux/cache.h>
+#include <linux/sizes.h>
 
 void __iomem *ioremap(unsigned long paddr, unsigned long size)
 {
@@ -80,7 +81,6 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 }
 EXPORT_SYMBOL(ioremap_prot);
 
-
 void iounmap(const void __iomem *addr)
 {
 	if (addr >= (void __force __iomem *)ARC_UNCACHED_ADDR_SPACE)
@@ -89,3 +89,11 @@ void iounmap(const void __iomem *addr)
 	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
 }
 EXPORT_SYMBOL(iounmap);
+
+#ifdef CONFIG_PCI
+int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
+{
+	return ioremap_nocache(phys_addr + offset,  SZ_64K);
+}
+EXPORT_SYMBOL_GPL(pci_ioremap_io);
+#endif
diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
index d475f9d..426ac4b 100644
--- a/arch/arc/plat-axs10x/Kconfig
+++ b/arch/arc/plat-axs10x/Kconfig
@@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
 	select DW_APB_ICTL
 	select GPIO_DWAPB
 	select OF_GPIO
+	select MIGHT_HAVE_PCI
 	select GENERIC_IRQ_CHIP
 	select ARCH_REQUIRE_GPIOLIB
 	help
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index be3f631..2154092 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
 # Some architectures use the generic PCI setup functions
 #
 obj-$(CONFIG_ALPHA) += setup-irq.o
+obj-$(CONFIG_ARC) += setup-irq.o
 obj-$(CONFIG_ARM) += setup-irq.o
 obj-$(CONFIG_ARM64) += setup-irq.o
 obj-$(CONFIG_UNICORE32) += setup-irq.o
-- 
1.8.1.5

[PATCH v4 2/2] add new platform driver for PCI RC

[Joao Pinto]

This patch adds a new driver that will be the reference platform driver for all
PCI RC IP Protoyping Kits based on ARC SDP. This patch is composed by:

-Changes to pcie-designware driver add a function that enables the feature of
starting the LTSSM (Link Train Status State) used by the new driver
-MAINTAINERS file was updated to include the new driver
-Documentation/devicetree/bindings/pci was updated to include the new driver
documentation
-New driver called pcie-snpsdev

Signed-off-by: Joao Pinto <jpinto at synopsys.com>
---
Changes v3 -> v4 (Bjorn Helgaas):
- ARCH dependencies were added to the drivers/pci/host/kconfig for the
PCIE_SNPSDEV.
Changes v2 -> v3 (Bjorn Helgaas):
- link init stuff was moved to a snpsdev_pcie_establish_link() function in
pcie-snpsdev
- pcie-snpsdev driver declaration was changed to be more 
standard (Bjorn Helgaas)
- pcie-designware' dw_pcie_link_retrain() now use standard registers from
pci-regs.h (Bjorn Helgaas)
- pcie-snpsdev.txt was complemented with more info (Mark Rutland)
Changes v1 -> v2 (Bjorn Helgaas):
- Fixups snpsdev_pcie_fixup_bridge() and snpsdev_pcie_fixup_res() were removed
from the driver (these functions were for specific tests only and not usefull
in mainline)
- Driver' comments were reviewed (fix Typos and excessive comments removal)
- Removed unnecessary definitions in the driver source (PCIE_PHY_CTRL and
PCIE_PHY_STAT)

 .../devicetree/bindings/pci/pcie-snpsdev.txt       |  33 +++
 MAINTAINERS                                        |   7 +
 drivers/pci/host/Kconfig                           |   8 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pcie-designware.c                 |  11 +
 drivers/pci/host/pcie-designware.h                 |   1 +
 drivers/pci/host/pcie-snpsdev.c                    | 286 +++++++++++++++++++++
 7 files changed, 347 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
 create mode 100644 drivers/pci/host/pcie-snpsdev.c

diff --git a/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt b/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
new file mode 100644
index 0000000..cae548b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
@@ -0,0 +1,33 @@
+Synopsys PCI RC IP Prototyping Kit
+----------------------------------
+
+This is the reference platform driver to be used in the Synopsys PCI Root
+Complex IP Prototyping Kit.
+
+Required properties:
+- compatible: set to "snps,pcie-snpsdev";
+- reg: base address and length of the pcie controller registers.
+- #address-cells: set to <3>
+- #size-cells: set to <2>
+- device_type: set to "pci"
+- ranges: ranges for the PCI memory and I/O regions.
+- interrupts: one interrupt source for MSI interrupts, followed by interrupt
+	source for hardware related interrupts.
+- #interrupt-cells: set to <1>
+- num-lanes: set to <1>;
+
+Example configuration:
+
+	pcie: pcie at 0xdffff000 {
+		compatible = "snps,pcie-snpsdev";
+		reg = <0xdffff000 0x1000>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		device_type = "pci";
+		ranges = <0x00000800 0 0xd0000000 0xd0000000 0 0x00002000>,
+			 <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
+			 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
+		interrupts = <25>, <24>;
+		#interrupt-cells = <1>;
+		num-lanes = <1>;
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index e9caa4b..d2e4506 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -8230,6 +8230,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-pcie.txt
 F:	drivers/pci/host/pcie-hisi.c
 
+PCI DRIVER FOR SYNOPSYS PROTOTYPING DEVICE
+M:	Joao Pinto <jpinto at synopsys.com>
+L:	linux-pci at vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/pcie-snpsdev.txt
+F:	drivers/pci/host/pcie-snpsdev.c
+
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
 L:	linux-pcmcia at lists.infradead.org
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index f131ba9..589bc15 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -172,4 +172,12 @@ config PCI_HISI
 	help
 	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
 
+config PCIE_SNPSDEV
+	bool "Platform Driver for Synopsys Device"
+	depends on ARC && OF
+	select PCIEPORTBUS
+	select PCIE_DW
+	help
+	  Say Y here if you want to enable PCIe controller support on the
+	  Synopsys IP Prototyping Kits.
 endmenu
diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
index 9d4d3c6..e422f65 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -20,3 +20,4 @@ obj-$(CONFIG_PCIE_IPROC_BCMA) += pcie-iproc-bcma.o
 obj-$(CONFIG_PCIE_ALTERA) += pcie-altera.o
 obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o
 obj-$(CONFIG_PCI_HISI) += pcie-hisi.o
+obj-$(CONFIG_PCIE_SNPSDEV) += pcie-snpsdev.o
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 540f077..a5fa046 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -22,6 +22,8 @@
 #include <linux/pci_regs.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/sizes.h>
 
 #include "pcie-designware.h"
 
@@ -706,6 +708,15 @@ static struct pci_ops dw_pcie_ops = {
 	.write = dw_pcie_wr_conf,
 };
 
+void dw_pcie_link_retrain(struct pcie_port *pp)
+{
+	u32 val = 0;
+
+	dw_pcie_readl_rc(pp, PCI_EXP_LNKCTL+0x70, &val);
+	val = val | PCI_EXP_LNKCTL_RL;
+	dw_pcie_writel_rc(pp, val, PCI_EXP_LNKCTL+0x70);
+}
+
 void dw_pcie_setup_rc(struct pcie_port *pp)
 {
 	u32 val;
diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h
index 2356d29..249b631 100644
--- a/drivers/pci/host/pcie-designware.h
+++ b/drivers/pci/host/pcie-designware.h
@@ -79,5 +79,6 @@ void dw_pcie_msi_init(struct pcie_port *pp);
 int dw_pcie_link_up(struct pcie_port *pp);
 void dw_pcie_setup_rc(struct pcie_port *pp);
 int dw_pcie_host_init(struct pcie_port *pp);
+void dw_pcie_link_retrain(struct pcie_port *pp);
 
 #endif /* _PCIE_DESIGNWARE_H */
diff --git a/drivers/pci/host/pcie-snpsdev.c b/drivers/pci/host/pcie-snpsdev.c
new file mode 100644
index 0000000..4ca7ec5
--- /dev/null
+++ b/drivers/pci/host/pcie-snpsdev.c
@@ -0,0 +1,286 @@
+/*
+ * PCIe RC driver for Synopsys Designware Core
+ *
+ * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * Authors: Manjunath Bettegowda <manjumb at synopsys.com>,
+ *	    Jie Deng <jiedeng at synopsys.com>
+ *	    Joao Pinto <jpinto at synopsys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_gpio.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+
+#define to_snpsdev_pcie(x)	container_of(x, struct snpsdev_pcie, pp)
+
+struct snpsdev_pcie {
+	void __iomem		*mem_base; /* Memory Base to access Core's [RC]
+					    * Config Space Layout
+					    */
+	struct pcie_port	pp;        /* RC Root Port specific structure -
+					    * DWC_PCIE_RC stuff
+					    */
+};
+
+#define PCI_EQUAL_CONTROL_PHY 0x00000707
+
+/* PCIe Port Logic registers (memory-mapped) */
+#define PLR_OFFSET 0x700
+#define PCIE_PHY_DEBUG_R0 (PLR_OFFSET + 0x28) /* 0x728 */
+#define PCIE_PHY_DEBUG_R1 (PLR_OFFSET + 0x2c) /* 0x72c */
+
+/* This handler was created for future work */
+static irqreturn_t snpsdev_pcie_irq_handler(int irq, void *arg)
+{
+	return IRQ_NONE;
+}
+
+static irqreturn_t snpsdev_pcie_msi_irq_handler(int irq, void *arg)
+{
+	struct pcie_port *pp = arg;
+
+	dw_handle_msi_irq(pp);
+
+	return IRQ_HANDLED;
+}
+
+static void snpsdev_pcie_init_phy(struct pcie_port *pp)
+{
+	/* write Lane 0 Equalization Control fields register */
+	writel(PCI_EQUAL_CONTROL_PHY, pp->dbi_base + 0x154);
+}
+
+static int snpsdev_pcie_deassert_core_reset(struct pcie_port *pp)
+{
+	return 0;
+}
+
+static void snpsdev_pcie_establish_link(struct pcie_port *pp)
+{
+	int count = 0;
+
+	/* Initialize Phy (Reset/poweron/control-inputs ) */
+	snpsdev_pcie_init_phy(pp);
+
+	/* de-assert core reset */
+	snpsdev_pcie_deassert_core_reset(pp);
+
+	/* We expect the PCIe Link to be up by this time */
+	dw_pcie_setup_rc(pp);
+
+	/* Start LTSSM here */
+	dw_pcie_link_retrain(pp);
+
+	while (!dw_pcie_link_up(pp)) {
+		usleep_range(1000, 1100);
+		count++;
+		if (count == 20) {
+			dev_err(pp->dev, "phy link never came up\n");
+			dev_dbg(pp->dev,
+				"PL_DEBUG0: 0x%08x, DEBUG_R1: 0x%08x\n",
+				readl(pp->dbi_base + PCIE_PHY_DEBUG_R0),
+				readl(pp->dbi_base + PCIE_PHY_DEBUG_R1));
+			break;
+		}
+	}
+}
+
+/*
+ * snpsdev_pcie_host_init()
+ * Platform specific host/RC initialization
+ *	a. Assert the core reset
+ *	b. Assert and deassert phy reset and initialize the phy
+ *	c. De-Assert the core reset
+ *	d. Initializet the Root Port (BARs/Memory Or IO/ Interrupt/ Commnad Reg)
+ *	e. Initiate Link startup procedure
+ *
+ */
+static void snpsdev_pcie_host_init(struct pcie_port *pp)
+{
+	/* Establish link */
+	snpsdev_pcie_establish_link(pp);
+
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		dw_pcie_msi_init(pp);
+}
+
+static int snpsdev_pcie_link_up(struct pcie_port *pp)
+{
+	u32 status;
+
+	/* Bit number 36: reports LTSSM PHY Link UP; Available in bit 3 of
+	 * PCIE_PHY_DEBUG_R1
+	 */
+	status = readl(pp->dbi_base + PCIE_PHY_DEBUG_R1) & (0x1 << 4);
+	if (status != 0)
+		return 1;
+
+	/* TODO:Now Link is in L0;Initiate GEN2/GEN3 migration if RC Supports*/
+	return 0;
+}
+
+/**
+ * This is RC operation structure
+ * snpsdev_pcie_link_up: the function which initiates the phy link up procedure
+ * snpsdev_pcie_host_init: the function which does the host/RC Root port
+ * initialization.
+ */
+static struct pcie_host_ops snpsdev_pcie_host_ops = {
+	.link_up = snpsdev_pcie_link_up,
+	.host_init = snpsdev_pcie_host_init,
+};
+
+/**
+ * snpsdev_add_pcie_port
+ * This function
+ * a. installs the interrupt handler
+ * b. registers host operations in the pcie_port structure
+ */
+static int snpsdev_add_pcie_port(struct pcie_port *pp,
+				 struct platform_device *pdev)
+{
+	int ret;
+
+	pp->irq = platform_get_irq(pdev, 1);
+
+	if (pp->irq < 0) {
+		if (pp->irq != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "cannot get irq\n");
+		return pp->irq;
+	}
+
+	ret = devm_request_irq(&pdev->dev, pp->irq, snpsdev_pcie_irq_handler,
+				IRQF_SHARED, "snpsdev-pcie", pp);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq\n");
+		return ret;
+	}
+
+	if (IS_ENABLED(CONFIG_PCI_MSI)) {
+		pp->msi_irq = platform_get_irq(pdev, 0);
+
+		if (pp->msi_irq < 0) {
+			if (pp->msi_irq != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "cannot get msi irq\n");
+			return pp->msi_irq;
+		}
+
+		ret = devm_request_irq(&pdev->dev, pp->msi_irq,
+					snpsdev_pcie_msi_irq_handler,
+					IRQF_SHARED, "snpsdev-pcie-msi", pp);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request msi irq\n");
+			return ret;
+		}
+	}
+
+	pp->root_bus_nr = -1;
+	pp->ops = &snpsdev_pcie_host_ops;
+
+	/* Below function:
+	 * Checks for range property from DT
+	 * Gets the IO and MEMORY and CONFIG-Space ranges from DT
+	 * Does IOREMAPS on the physical addresses
+	 * Gets the num-lanes from DT
+	 * Gets MSI capability from DT
+	 * Calls the platform specific host initialization
+	 * Program the correct class, BAR0, Link width, in Config space
+	 * Then it calls pci common init routine
+	 * Then it calls function to assign "unassigned resources"
+	 */
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize host\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * snpsdev_pcie_rc_probe()
+ * This function gets called as part of pcie registration. if the id matches
+ * the platform driver framework will call this function.
+ *
+ * @pdev: Pointer to the platform_device structure
+ *
+ * Returns zero on success; Negative errorno on failure
+ */
+static int snpsdev_pcie_rc_probe(struct platform_device *pdev)
+{
+	struct snpsdev_pcie *snpsdev_pcie;
+	struct pcie_port *pp;
+	struct resource *dwc_pcie_rc_res;  /* Resource from DT */
+	int ret;
+
+	snpsdev_pcie = devm_kzalloc(&pdev->dev, sizeof(*snpsdev_pcie),
+					GFP_KERNEL);
+	if (!snpsdev_pcie)
+		return -ENOMEM;
+
+	pp = &snpsdev_pcie->pp;
+	pp->dev = &pdev->dev;
+
+	dwc_pcie_rc_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!dwc_pcie_rc_res)
+		return -ENODEV;
+
+	snpsdev_pcie->mem_base = devm_ioremap_resource(&pdev->dev,
+							dwc_pcie_rc_res);
+	if (IS_ERR(snpsdev_pcie->mem_base)) {
+		ret = PTR_ERR(snpsdev_pcie->mem_base);
+		return ret;
+	}
+	pp->dbi_base = snpsdev_pcie->mem_base;
+
+	ret = snpsdev_add_pcie_port(pp, pdev);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, snpsdev_pcie);
+
+	return 0;
+}
+
+static int snpsdev_pcie_rc_remove(struct platform_device *pdev)
+{
+	return 0;
+}
+
+static const struct of_device_id snpsdev_pcie_rc_of_match[] = {
+	{ .compatible = "snps,pcie-snpsdev", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, snpsdev_pcie_rc_of_match);
+
+static struct platform_driver snpsdev_pcie_rc_driver = {
+	.driver = {
+		.name	= "pcie-snpsdev",
+		.of_match_table = snpsdev_pcie_rc_of_match,
+	},
+	.probe = snpsdev_pcie_rc_probe,
+};
+
+module_platform_driver(snpsdev_pcie_rc_driver);
+
+MODULE_AUTHOR("Manjunath Bettegowda <manjumb at synopsys.com>");
+MODULE_DESCRIPTION("Platform Driver for Synopsys Device");
+MODULE_LICENSE("GPL v2");
-- 
1.8.1.5

[PATCH v4 1/2] PCI support added to ARC

[Vineet Gupta]

On Monday 11 January 2016 10:54 PM, Joao Pinto wrote:
> This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
> the ARC arch to use the generic PCI setup functions.
> ...
>  
> diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h
> index 694ece8..2ec3cf4 100644
> --- a/arch/arc/include/asm/io.h
> +++ b/arch/arc/include/asm/io.h
> @@ -16,7 +16,17 @@
>  extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
>  extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
>  				  unsigned long flags);
> +static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
> +{
> +	return (void __iomem *)port;
> +}
> +
> +static inline void ioport_unmap(void __iomem *addr)
> +{
> +}
> +
>  extern void iounmap(const void __iomem *addr);
> +extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr);

Can u just define the one liner here ?

>  #define ioremap_nocache(phy, sz)	ioremap(phy, sz)
>  #define ioremap_wc(phy, sz)		ioremap(phy, sz)
> diff --git a/arch/arc/include/asm/pci.h b/arch/arc/include/asm/pci.h
> new file mode 100644
> index 0000000..a0a0fa5
> --- /dev/null
> +++ b/arch/arc/include/asm/pci.h
> @@ -0,0 +1,43 @@
> +/*
> + * Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef _ASM_ARC_PCI_H
> +#define _ASM_ARC_PCI_H
> +
> +#ifdef __KERNEL__
> +#include <asm-generic/pci-dma-compat.h>
> +#include <asm-generic/pci-bridge.h>
> +
> +#include <linux/ioport.h>
> +
> +extern unsigned long pcibios_min_io;
> +#define PCIBIOS_MIN_IO pcibios_min_io
> +extern unsigned long pcibios_min_mem;
> +#define PCIBIOS_MIN_MEM pcibios_min_mem
> +
> +#define pcibios_assign_all_busses()	1
> +/*
> + * The PCI address space does equal the physical memory address space.
> + * The networking and block device layers use this boolean for bounce
> + * buffer decisions.
> + */
> +#define PCI_DMA_BUS_IS_PHYS     (1)
> +
> +/*
> + * Setup early fixed I/O mapping.
> + */
> +#if defined(CONFIG_PCI)
> +extern void pci_map_io_early(unsigned long pfn);
> +#else
> +static inline void pci_map_io_early(unsigned long pfn) {}
> +#endif

I don't see this being used - leftover from ARM copy/paste ?

> +
> +#endif /* __KERNEL__ */
> +
> +#endif /* _ASM_ARC_PCI_H */
> +
> diff --git a/arch/arc/kernel/Makefile b/arch/arc/kernel/Makefile
> index e7f3625..1bc2036 100644
> --- a/arch/arc/kernel/Makefile
> +++ b/arch/arc/kernel/Makefile
> @@ -12,6 +12,7 @@ obj-y	:= arcksyms.o setup.o irq.o time.o reset.o ptrace.o process.o devtree.o
>  obj-y	+= signal.o traps.o sys.o troubleshoot.o stacktrace.o disasm.o clk.o
>  obj-$(CONFIG_ISA_ARCOMPACT)		+= entry-compact.o intc-compact.o
>  obj-$(CONFIG_ISA_ARCV2)			+= entry-arcv2.o intc-arcv2.o
> +obj-$(CONFIG_PCI)  			+= pcibios.o
>  
>  obj-$(CONFIG_MODULES)			+= arcksyms.o module.o
>  obj-$(CONFIG_SMP) 			+= smp.o
> diff --git a/arch/arc/kernel/pcibios.c b/arch/arc/kernel/pcibios.c
> new file mode 100644
> index 0000000..99ee329
> --- /dev/null
> +++ b/arch/arc/kernel/pcibios.c
> @@ -0,0 +1,55 @@
> +/*
> + * Copyright (C) 2014-2015 Synopsys, Inc. (www.synopsys.com)
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/pci.h>
> +#include <linux/delay.h>
> +#include <linux/string.h>
> +#include <linux/init.h>
> +#include <linux/sched.h>
> +#include <linux/errno.h>
> +#include <linux/bootmem.h>
> +#include <linux/sizes.h>
> +#include <linux/slab.h>

I doubt if you really need all these includes ?

> +
> +#include <asm/pci.h>
> +
> +unsigned long pcibios_min_io = 0x100;
> +EXPORT_SYMBOL(pcibios_min_io);
> +
> +unsigned long pcibios_min_mem = 0x100000;
> +EXPORT_SYMBOL(pcibios_min_mem);

These numbers and their magic values again seem to be used in ARM code only.
Please get rid of them (here as well as in header above)

> +
> +/*
> + * We don't have to worry about legacy ISA devices, so nothing to do here
> + */
> +resource_size_t pcibios_align_resource(void *data, const struct resource *res,
> +				resource_size_t size, resource_size_t align)
> +{
> +	return res->start;
> +}
> +
> +/*
> + * If the bus contains any of these devices, then we must not turn on
> + * parity checking of any kind.  Currently this is CyberPro 20x0 only.
> + */
> +static inline int pdev_bad_for_parity(struct pci_dev *dev)
> +{
> +	return ((dev->vendor == PCI_VENDOR_ID_INTERG &&
> +		 (dev->device == PCI_DEVICE_ID_INTERG_2000 ||
> +		  dev->device == PCI_DEVICE_ID_INTERG_2010)) ||
> +		(dev->vendor == PCI_VENDOR_ID_ITE &&
> +		 dev->device == PCI_DEVICE_ID_ITE_8152));
> +
> +}

static inline in a "C" file with no caller - please remove !

> +
> +void pcibios_fixup_bus(struct pci_bus *bus)
> +{
> +}
> +EXPORT_SYMBOL(pcibios_fixup_bus);
> diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
> index 739e65f..fe807b0 100644
> --- a/arch/arc/mm/ioremap.c
> +++ b/arch/arc/mm/ioremap.c
> @@ -13,6 +13,7 @@
>  #include <linux/mm.h>
>  #include <linux/slab.h>
>  #include <linux/cache.h>
> +#include <linux/sizes.h>
>  
>  void __iomem *ioremap(unsigned long paddr, unsigned long size)
>  {
> @@ -80,7 +81,6 @@ void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
>  }
>  EXPORT_SYMBOL(ioremap_prot);
>  
> -
>  void iounmap(const void __iomem *addr)
>  {
>  	if (addr >= (void __force __iomem *)ARC_UNCACHED_ADDR_SPACE)
> @@ -89,3 +89,11 @@ void iounmap(const void __iomem *addr)
>  	vfree((void *)(PAGE_MASK & (unsigned long __force)addr));
>  }
>  EXPORT_SYMBOL(iounmap);
> +
> +#ifdef CONFIG_PCI
> +int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr)
> +{
> +	return ioremap_nocache(phys_addr + offset,  SZ_64K);
> +}
> +EXPORT_SYMBOL_GPL(pci_ioremap_io);

can be moved to io.h w/o need for EXPORT_SYMBOL...

> +#endif
> diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig
> index d475f9d..426ac4b 100644
> --- a/arch/arc/plat-axs10x/Kconfig
> +++ b/arch/arc/plat-axs10x/Kconfig
> @@ -11,6 +11,7 @@ menuconfig ARC_PLAT_AXS10X
>  	select DW_APB_ICTL
>  	select GPIO_DWAPB
>  	select OF_GPIO
> +	select MIGHT_HAVE_PCI
>  	select GENERIC_IRQ_CHIP
>  	select ARCH_REQUIRE_GPIOLIB
>  	help
> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> index be3f631..2154092 100644
> --- a/drivers/pci/Makefile
> +++ b/drivers/pci/Makefile
> @@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_IOV) += iov.o
>  # Some architectures use the generic PCI setup functions
>  #
>  obj-$(CONFIG_ALPHA) += setup-irq.o
> +obj-$(CONFIG_ARC) += setup-irq.o
>  obj-$(CONFIG_ARM) += setup-irq.o
>  obj-$(CONFIG_ARM64) += setup-irq.o
>  obj-$(CONFIG_UNICORE32) += setup-irq.o

[PATCH v4 1/2] PCI support added to ARC

[Vineet Gupta]

On Monday 11 January 2016 10:54 PM, Joao Pinto wrote:
> This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
> the ARC arch to use the generic PCI setup functions.
> 
> Signed-off-by: Joao Pinto <jpinto at synopsys.com>

BTW this patch has whitespace errors still - can you make sure they are not in the
next version(s)

-Vineet

[PATCH v4 1/2] PCI support added to ARC

[Joao Pinto]

Hi Vineet,

On 1/12/2016 6:05 AM, Vineet Gupta wrote:
> On Monday 11 January 2016 10:54 PM, Joao Pinto wrote:
>> This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
>> the ARC arch to use the generic PCI setup functions.
>>
>> Signed-off-by: Joao Pinto <jpinto at synopsys.com>
> 
> BTW this patch has whitespace errors still - can you make sure they are not in the
> next version(s)

By executing checkpatch.pl no whitespaces were detected:

WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
#9:
This patch adds PCI support to ARC and updates drivers/pci Makefile enabling

WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
#132:
new file mode 100644

total: 0 errors, 2 warnings, 212 lines checked

0001-PCI-support-added-to-ARC.patch has style problems, please review.

> 
> -Vineet
> 

I am going to check your comments and make the necessary adjustments.

Thanks,
Joao

[PATCH v4 1/2] PCI support added to ARC

[Vineet Gupta]

On Tuesday 12 January 2016 03:25 PM, Joao Pinto wrote:
> Hi Vineet,
>
> On 1/12/2016 6:05 AM, Vineet Gupta wrote:
>> On Monday 11 January 2016 10:54 PM, Joao Pinto wrote:
>>> This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
>>> the ARC arch to use the generic PCI setup functions.
>>>
>>> Signed-off-by: Joao Pinto <jpinto at synopsys.com>
>> BTW this patch has whitespace errors still - can you make sure they are not in the
>> next version(s)
> By executing checkpatch.pl no whitespaces were detected:
>
> WARNING: Possible unwrapped commit description (prefer a maximum 75 chars per line)
> #9:
> This patch adds PCI support to ARC and updates drivers/pci Makefile enabling
>
> WARNING: added, moved or deleted file(s), does MAINTAINERS need updating?
> #132:
> new file mode 100644
>
> total: 0 errors, 2 warnings, 212 lines checked
>
> 0001-PCI-support-added-to-ARC.patch has style problems, please review.

git am /tmp/1.eml  
Applying: PCI support added to ARC
~/k.org/.git/rebase-apply/patch:167: new blank line at EOF.
+
warning: 1 line adds whitespace errors.