From: Bo Shen <voice.shen@atmel.com>
To: broonie@opensource.wolfsonmicro.com, nicolas.ferre@atmel.com
Cc: linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org, linux-sound@vger.kernel.org,
alsa-devel@alsa-project.org, plagnioj@jcrosoft.com,
jm.lin@atmel.com, Bo Shen <voice.shen@atmel.com>
Subject: [PATCH 2/5] ARM: at91: atmel-ssc: add device tree support
Date: Mon, 22 Oct 2012 10:17:56 +0000 [thread overview]
Message-ID: <1350901079-18307-2-git-send-email-voice.shen@atmel.com> (raw)
In-Reply-To: <1350901079-18307-1-git-send-email-voice.shen@atmel.com>
Add Atmel SSC for device tree support.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
.../devicetree/bindings/misc/atmel-ssc.txt | 15 ++++++
arch/arm/boot/dts/at91sam9260.dtsi | 8 ++++
arch/arm/boot/dts/at91sam9263.dtsi | 16 +++++++
arch/arm/boot/dts/at91sam9g45.dtsi | 16 +++++++
arch/arm/boot/dts/at91sam9x5.dtsi | 8 ++++
arch/arm/mach-at91/at91rm9200.c | 3 ++
arch/arm/mach-at91/at91sam9260.c | 1 +
arch/arm/mach-at91/at91sam9261.c | 3 ++
arch/arm/mach-at91/at91sam9263.c | 2 +
arch/arm/mach-at91/at91sam9g45.c | 2 +
arch/arm/mach-at91/at91sam9rl.c | 2 +
arch/arm/mach-at91/at91sam9x5.c | 1 +
drivers/misc/atmel-ssc.c | 48 ++++++++++++++++++--
13 files changed, 122 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/misc/atmel-ssc.txt
diff --git a/Documentation/devicetree/bindings/misc/atmel-ssc.txt b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
new file mode 100644
index 0000000..ff5ea22
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/atmel-ssc.txt
@@ -0,0 +1,15 @@
+* Atmel SSC driver.
+
+Required properties:
+- compatible: "atmel,at91rm9200_ssc" or "atmel,at91sam9g45_ssc"
+ - atmel,at91rm9200_ssc: support pdc transfer
+ - atmel,at91sam9g45_ssc: support dma transfer
+- reg: Should contain SSC registers location and length
+- interrupts: Should contain SSC interrupt
+
+Example:
+ssc0: ssc@fffbc000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffbc000 0x4000>;
+ interrupts = <14 4 5>;
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index d410581..aaa42d8 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -29,6 +29,7 @@
tcb0 = &tcb0;
tcb1 = &tcb1;
i2c0 = &i2c0;
+ ssc0 = &ssc0;
};
cpus {
cpu@0 {
@@ -212,6 +213,13 @@
status = "disabled";
};
+ ssc0: ssc@fffbc000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfffbc000 0x4000>;
+ interrupts = <14 4 5>;
+ status = "disable";
+ };
+
adc0: adc@fffe0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffe0000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi
index 3e6e5c1..3b721ee 100644
--- a/arch/arm/boot/dts/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/at91sam9263.dtsi
@@ -25,6 +25,8 @@
gpio4 = &pioE;
tcb0 = &tcb0;
i2c0 = &i2c0;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
};
cpus {
cpu@0 {
@@ -173,6 +175,20 @@
status = "disabled";
};
+ ssc0: ssc@fff98000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfff98000 0x4000>;
+ interrupts = <16 4 5>;
+ status = "disable";
+ };
+
+ ssc1: ssc@fff9c000 {
+ compatible = "atmel,at91rm9200-ssc";
+ reg = <0xfff9c000 0x4000>;
+ interrupts = <17 4 5>;
+ status = "disable";
+ };
+
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 3add030..cd9af7c 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -31,6 +31,8 @@
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
+ ssc0 = &ssc0;
+ ssc1 = &ssc1;
};
cpus {
cpu@0 {
@@ -226,6 +228,20 @@
status = "disabled";
};
+ ssc0: ssc@fff9c000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xfff9c000 0x4000>;
+ interrupts = <16 4 5>;
+ status = "disable";
+ };
+
+ ssc0: ssc@fffa0000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xfffa0000 0x4000>;
+ interrupts = <17 4 5>;
+ status = "disable";
+ };
+
adc0: adc@fffb0000 {
compatible = "atmel,at91sam9260-adc";
reg = <0xfffb0000 0x100>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 03fc136..69667d0 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -30,6 +30,7 @@
i2c0 = &i2c0;
i2c1 = &i2c1;
i2c2 = &i2c2;
+ ssc0 = &ssc0;
};
cpus {
cpu@0 {
@@ -87,6 +88,13 @@
interrupts = <1 4 7>;
};
+ ssc0: ssc@f0010000 {
+ compatible = "atmel,at91sam9g45-ssc";
+ reg = <0xf0010000 0x4000>;
+ interrupts = <28 4 5>;
+ status = "disable";
+ };
+
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index 85d53c5..6d65feb 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -187,6 +187,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffd0000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffd4000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffd8000.ssc", &ssc2_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 2c8aab0..54d4aea 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -211,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
/* more usart lookup table for DT entries */
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 4e8c56e..5c7a482 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -177,6 +177,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 95a5471..1f523de 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -188,6 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index f4f96a6..a4282d3 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -241,6 +241,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 4110b54..b683fdc 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -186,6 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
+ CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index e503538..18fbbb2 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -231,6 +231,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
+ CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c
index f40abd8..929d29a 100644
--- a/drivers/misc/atmel-ssc.c
+++ b/drivers/misc/atmel-ssc.c
@@ -18,6 +18,8 @@
#include <linux/slab.h>
#include <linux/module.h>
+#include <linux/of.h>
+
/* Serialize access to ssc_list and user count */
static DEFINE_SPINLOCK(user_lock);
static LIST_HEAD(ssc_list);
@@ -29,7 +31,13 @@ struct ssc_device *ssc_request(unsigned int ssc_num)
spin_lock(&user_lock);
list_for_each_entry(ssc, &ssc_list, list) {
- if (ssc->pdev->id = ssc_num) {
+ if (ssc->pdev->dev.of_node) {
+ if (of_alias_get_id(ssc->pdev->dev.of_node, "ssc")
+ = ssc_num) {
+ ssc_valid = 1;
+ break;
+ }
+ } else if (ssc->pdev->id = ssc_num) {
ssc_valid = 1;
break;
}
@@ -88,10 +96,41 @@ static const struct platform_device_id atmel_ssc_devtypes[] = {
}
};
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_ssc_dt_ids[] = {
+ {
+ .compatible = "atmel,at91rm9200-ssc",
+ .data = &at91rm9200_config,
+ }, {
+ .compatible = "atmel,at91sam9g45-ssc",
+ .data = &at91sam9g45_config,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(of, atmel_ssc_dt_ids);
+#endif
+
+static inline const struct atmel_ssc_platform_data * __init
+ atmel_ssc_get_driver_data(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(atmel_ssc_dt_ids, pdev->dev.of_node);
+ if (match = NULL)
+ return NULL;
+ return match->data;
+ }
+
+ return (struct atmel_ssc_platform_data *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
static int ssc_probe(struct platform_device *pdev)
{
struct resource *regs;
struct ssc_device *ssc;
+ const struct atmel_ssc_platform_data *plat_dat;
ssc = devm_kzalloc(&pdev->dev, sizeof(struct ssc_device), GFP_KERNEL);
if (!ssc) {
@@ -100,8 +139,10 @@ static int ssc_probe(struct platform_device *pdev)
}
ssc->pdev = pdev;
- ssc->pdata = (struct atmel_ssc_platform_data *)
- platform_get_device_id(pdev)->driver_data;
+
+ plat_dat = atmel_ssc_get_driver_data(pdev);
+ if (!plat_dat)
+ return -ENODEV;
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
@@ -160,6 +201,7 @@ static struct platform_driver ssc_driver = {
.driver = {
.name = "ssc",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(atmel_ssc_dt_ids),
},
.id_table = atmel_ssc_devtypes,
.probe = ssc_probe,
--
1.7.9.5
next prev parent reply other threads:[~2012-10-22 10:17 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-22 10:17 [PATCH 1/5] ARM: at91: atmel-ssc: add platform device id table Bo Shen
2012-10-22 10:17 ` Bo Shen [this message]
2012-10-30 17:13 ` [PATCH 2/5] ARM: at91: atmel-ssc: add device tree support Nicolas Ferre
2012-10-22 10:17 ` [PATCH 3/5] ASoC: atmel-ssc-dai: register 'platform' from DAIs Bo Shen
2012-10-22 10:17 ` [PATCH 4/5] ASoC: sam9g20_wm8731: convert to device tree support Bo Shen
2012-10-27 22:12 ` Mark Brown
2012-10-29 6:38 ` Bo Shen
2012-10-22 10:17 ` [PATCH 5/5] ASoC: sam9g20_wm8731: fix the issue for non-DT kernel Bo Shen
2012-10-27 22:14 ` Mark Brown
2012-10-29 6:15 ` Bo Shen
2012-10-30 16:07 ` [PATCH 1/5] ARM: at91: atmel-ssc: add platform device id table Mark Brown
2012-10-30 17:14 ` Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350901079-18307-2-git-send-email-voice.shen@atmel.com \
--to=voice.shen@atmel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jm.lin@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox