From: Bo Shen <voice.shen@atmel.com>
To: broonie@opensource.wolfsonmicro.com, nicolas.ferre@atmel.com
Cc: linux-arm-kernel@lists.infradead.org,
devicetree-discuss@lists.ozlabs.org, linux-sound@vger.kernel.org,
alsa-devel@alsa-project.org, plagnioj@jcrosoft.com,
jm.lin@atmel.com, Bo Shen <voice.shen@atmel.com>
Subject: [Patch v2 4/4] ASoC: sam9g20-wm8731: convert to device tree support
Date: Wed, 31 Oct 2012 07:27:00 +0000 [thread overview]
Message-ID: <1351668420-18447-4-git-send-email-voice.shen@atmel.com> (raw)
In-Reply-To: <1351668420-18447-1-git-send-email-voice.shen@atmel.com>
convert sam9g20-wm8731 to device tree support.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Change since v1:
Add sam9g20-wm8731 binding document
---
.../bindings/sound/atmel-sam9g20-audio-wm8731.txt | 21 ++++++++
arch/arm/boot/dts/at91sam9g20ek_common.dtsi | 25 +++++++++-
sound/soc/atmel/Kconfig | 3 +-
sound/soc/atmel/sam9g20_wm8731.c | 51 +++++++++++++++++++-
4 files changed, 94 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/atmel-sam9g20-audio-wm8731.txt
diff --git a/Documentation/devicetree/bindings/sound/atmel-sam9g20-audio-wm8731.txt b/Documentation/devicetree/bindings/sound/atmel-sam9g20-audio-wm8731.txt
new file mode 100644
index 0000000..04a39dd
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-sam9g20-audio-wm8731.txt
@@ -0,0 +1,21 @@
+* Atmel sam9g20ek audio complex
+
+Required properties:
+ - compatible: "atmel,at91sam9g20-audio"
+ - atmel,model: The user-visible name of this sound complex.
+ - atmel,audio-routing: A list of the connections between audio components.
+ - atmel,dai: The phandle of the dai based on SSC controller
+ - atmel,audio-codec: The phandle of the WM8731 audio codec
+
+Example:
+sound {
+ compatible = "atmel,at91sam9g20-audio";
+ atmel,model = "wm8731 @ sam9g20ek";
+
+ atmel,audio-routing + "Ext Spk", "LHPOUT",
+ "Int MIC", "MICIN";
+
+ atmel,dai = <&dai>;
+ atmel,audio-codec = <&wm8731>;
+};
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index b06c0db..056ff33 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -51,6 +51,10 @@
atmel,vbus-gpio = <&pioC 5 0>;
status = "okay";
};
+
+ ssc0: ssc@fffbc000 {
+ status = "okay";
+ };
};
nand0: nand@40000000 {
@@ -114,8 +118,8 @@
reg = <0x50>;
};
- wm8731@1b {
- compatible = "wm8731";
+ wm8731: wm8731@1b {
+ compatible = "wlf,wm8731";
reg = <0x1b>;
};
};
@@ -139,4 +143,21 @@
gpio-key,wakeup;
};
};
+
+ dai: dai {
+ compatible = "atmel,atmel-ssc-dai";
+ atmel,dai-master = <&ssc0>;
+ };
+
+ sound {
+ compatible = "atmel,at91sam9g20-audio";
+ atmel,model = "wm8731 @ sam9g20ek";
+
+ atmel,audio-routing + "Ext Spk", "LHPOUT",
+ "Int Mic", "MICIN";
+
+ atmel,audio-codec = <&wm8731>;
+ atmel,dai = <&dai>;
+ };
};
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig
index 72b09cf..397ec75 100644
--- a/sound/soc/atmel/Kconfig
+++ b/sound/soc/atmel/Kconfig
@@ -16,8 +16,7 @@ config SND_ATMEL_SOC_SSC
config SND_AT91_SOC_SAM9G20_WM8731
tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
- depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC && \
- AT91_PROGRAMMABLE_CLOCKS
+ depends on ATMEL_SSC && SND_ATMEL_SOC && AT91_PROGRAMMABLE_CLOCKS
select SND_ATMEL_SOC_SSC
select SND_SOC_WM8731
help
diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c
index c3e1df5..0a275d0 100644
--- a/sound/soc/atmel/sam9g20_wm8731.c
+++ b/sound/soc/atmel/sam9g20_wm8731.c
@@ -197,13 +197,17 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = {
static int __devinit at91sam9g20ek_audio_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *codec_np, *cpu_np;
struct clk *pllb;
struct snd_soc_card *card =&snd_soc_at91sam9g20ek;
int ret;
- if (!(machine_is_at91sam9g20ek() || machine_is_at91sam9g20ek_2mmc()))
+ if (!np) {
+ if (!(machine_is_at91sam9g20ek()
+ || machine_is_at91sam9g20ek_2mmc()))
return -ENODEV;
-
+ }
/*
* Codec MCLK is supplied by PCK0 - set it up.
*/
@@ -230,6 +234,40 @@ static int __devinit at91sam9g20ek_audio_probe(struct platform_device *pdev)
clk_set_rate(mclk, MCLK_RATE);
card->dev = &pdev->dev;
+
+ /* Parse device node info */
+ if (np) {
+ ret = snd_soc_of_parse_card_name(card, "atmel,model");
+ if (ret)
+ goto err;
+
+ ret = snd_soc_of_parse_audio_routing(card,
+ "atmel,audio-routing");
+ if (ret)
+ goto err;
+
+ /* Parse codec dai info */
+ at91sam9g20ek_dai.codec_name = NULL;
+ codec_np = of_parse_phandle(np, "atmel,audio-codec", 0);
+ if (!codec_np) {
+ dev_err(&pdev->dev, "codec info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.codec_of_node = codec_np;
+ at91sam9g20ek_dai.cpu_dai_name = NULL;
+ at91sam9g20ek_dai.platform_name = NULL;
+ cpu_np = of_parse_phandle(np, "atmel,dai", 0);
+ if (!cpu_np) {
+ dev_err(&pdev->dev, "dai info missing\n");
+ return -EINVAL;
+ }
+ at91sam9g20ek_dai.cpu_of_node = cpu_np;
+ at91sam9g20ek_dai.platform_of_node = cpu_np;
+
+ of_node_put(codec_np);
+ of_node_put(cpu_np);
+ }
+
ret = snd_soc_register_card(card);
if (ret) {
printk(KERN_ERR "ASoC: snd_soc_register_card() failed\n");
@@ -255,10 +293,19 @@ static int __devexit at91sam9g20ek_audio_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_OF
+static const struct of_device_id sam9g20ek_wm8731_dt_ids[] = {
+ { .compatible = "atmel,at91sam9g20-audio", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sam9g20ek_wm8731_dt_ids);
+#endif
+
static struct platform_driver at91sam9g20ek_audio_driver = {
.driver = {
.name = "at91sam9g20ek-audio",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sam9g20ek_wm8731_dt_ids),
},
.probe = at91sam9g20ek_audio_probe,
.remove = __devexit_p(at91sam9g20ek_audio_remove),
--
1.7.9.5
next prev parent reply other threads:[~2012-10-31 7:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-31 7:26 [Patch v2 1/4] ARM: at91: atmel-ssc: add platform device id table Bo Shen
2012-10-31 7:26 ` [Patch v2 2/4] ARM: at91: atmel-ssc: add device tree support Bo Shen
2012-10-31 8:39 ` Nicolas Ferre
2012-10-31 7:26 ` [Patch v2 3/4] ASoC: atmel-ssc-dai: register platform from DAIs Bo Shen
2012-10-31 8:41 ` Nicolas Ferre
2012-11-01 14:43 ` Mark Brown
2012-11-02 2:34 ` Bo Shen
2012-11-02 14:24 ` Mark Brown
2012-11-05 5:25 ` Bo Shen
2012-11-06 5:39 ` Bo Shen
2012-11-06 8:53 ` Mark Brown
2012-10-31 7:27 ` Bo Shen [this message]
2012-10-31 8:42 ` [Patch v2 4/4] ASoC: sam9g20-wm8731: convert to device tree support Nicolas Ferre
2012-10-31 8:38 ` [Patch v2 1/4] ARM: at91: atmel-ssc: add platform device id table Nicolas Ferre
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351668420-18447-4-git-send-email-voice.shen@atmel.com \
--to=voice.shen@atmel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=jm.lin@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox