From: "Rob Herring (Arm)" <robh@kernel.org>
To: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Cc: Srinivas Kandagatla <srini@kernel.org>,
devicetree@vger.kernel.org, Mark Brown <broonie@kernel.org>,
linux-kernel@vger.kernel.org,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>,
linux-sound@vger.kernel.org,
Konrad Dybcio <konradybcio@kernel.org>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <andersson@kernel.org>,
cros-qcom-dts-watchers@chromium.org, linux-gpio@vger.kernel.org,
Liam Girdwood <lgirdwood@gmail.com>,
kernel@oss.qualcomm.com,
Linus Walleij <linus.walleij@linaro.org>,
Conor Dooley <conor+dt@kernel.org>
Subject: Re: [PATCH v8 0/9] Enable audio on qcs6490-RB3Gen2 and qcm6490-idp boards
Date: Thu, 21 Aug 2025 12:19:43 -0500 [thread overview]
Message-ID: <175579643373.37269.13580204801598375110.robh@kernel.org> (raw)
In-Reply-To: <20250821044914.710044-1-quic_pkumpatl@quicinc.com>
On Thu, 21 Aug 2025 10:19:05 +0530, Prasad Kumpatla wrote:
> From: Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>
>
> Audio support is now enabled on the qcs6490-RB3Gen2 and qcm6490-idp boards.
> The updates include adding the necessary audio device tree support and the required
> dependencies.
>
> Both the qcs6490-RB3Gen2 and qcm6490-idp boards are derived from the same SoC
> platform. Therefore, the audio support changes are included in a single patch
> set for consistency and ease of maintenance.
>
> changes in [v8]:
> - Added drive strength for all lpass_dmic pinctrl nodes reported by Konrad Dybcio.
> - Rebased changes on top of the latest kernel tree.
> - Link to V7: https://lore.kernel.org/all/20250720173215.3075576-1-quic_pkumpatl@quicinc.com/
>
> changes in [v7]:
> - Addressed the review commnets in dt-binding patches from Krzysztof Kozlowski
> - Rebased changes on top of dependent patches
> - Link to V6: https://lore.kernel.org/linux-sound/20250715180050.3920019-1-quic_pkumpatl@quicinc.com/
>
> changes in [v6]:
> - Addressed the review commnets in dt-binding patches from Krzysztof Kozlowski
> - Link to V5: https://lore.kernel.org/linux-arm-msm/20250625082927.31038-1-quic_pkumpatl@quicinc.com/
>
> changes in [v5]:
> - Added separate patch for QCS6490 pinctrl bindings.
> - Updated commit message with more description.
> - Addressed the review commnets.
> - Link to V4: https://lore.kernel.org/linux-arm-msm/20250527111227.2318021-1-quic_pkumpatl@quicinc.com/
>
> Changes in [v4]:
> - Fix DT binding errors by adding dt-binding clock changes for ADSP base platform.
> - Link to V3 : https://lore.kernel.org/linux-arm-msm/20250520062618.2765109-1-quic_pkumpatl@quicinc.com/
>
> Changes in [v3]:
> - Added protection-domain in gpr services.
> - Addressed the review commnets from Konrad Dybcio.
> - Fix DT binding errors reported by Rob Herring.
> - Link to V2 : https://lore.kernel.org/linux-arm-msm/20250429092430.21477-1-quic_pkumpatl@quicinc.com/
>
> Changes in [v2]:
> - Created dtsi file to handle common audio nodes to support Audioreach.
> - Addressed the review comments.
> - Link to V1 : https://lore.kernel.org/linux-arm-msm/20250317054151.6095-2-quic_pkumpatl@quicinc.com/
>
> Mohammad Rafi Shaik (9):
> arm64: dts: qcom: qcs6490-audioreach: Add gpr node
> dt-bindings: pinctrl: qcom,sc7280-lpass-lpi-pinctrl: Document the
> clock property
> ASoC: dt-bindings: qcom,lpass-va-macro: Update bindings for clocks to
> support ADSP
> arm64: dts: qcom: sc7280: Add WSA SoundWire and LPASS support
> arm64: dts: qcom: qcs6490-audioreach: Modify LPASS macros clock
> settings for audioreach
> arm64: dts: qcom: qcs6490-rb3gen2: Add WSA8830 speakers amplifier
> arm64: dts: qcom: qcs6490-rb3gen2: Add sound card
> arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370
> headset codec
> arm64: dts: qcom: qcm6490-idp: Add sound card
>
> .../qcom,sc7280-lpass-lpi-pinctrl.yaml | 16 ++
> .../bindings/sound/qcom,lpass-va-macro.yaml | 23 +-
> arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 207 ++++++++++++++++++
> .../boot/dts/qcom/qcs6490-audioreach.dtsi | 121 ++++++++++
> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 80 +++++++
> arch/arm64/boot/dts/qcom/sc7280.dtsi | 99 ++++++++-
> 6 files changed, 540 insertions(+), 6 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
>
>
> base-commit: 5303936d609e09665deda94eaedf26a0e5c3a087
> --
> 2.34.1
>
>
>
My bot found new DTB warnings on the .dts files added or changed in this
series.
Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.
If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:
pip3 install dtschema --upgrade
This patch series was applied (using b4) to base:
Base: using specified base-commit 5303936d609e09665deda94eaedf26a0e5c3a087
If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)
New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250821044914.710044-1-quic_pkumpatl@quicinc.com:
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pmic@2 (qcom,pm8350c): pwm:nvmem: [[366, 367]] is too short
from schema $id: http://devicetree.org/schemas/mfd/qcom,spmi-pmic.yaml#
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dtb: pwm (qcom,pm8350c-pwm): nvmem: [[366, 367]] is too short
from schema $id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
prev parent reply other threads:[~2025-08-21 17:19 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-21 4:49 [PATCH v8 0/9] Enable audio on qcs6490-RB3Gen2 and qcm6490-idp boards Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 1/9] arm64: dts: qcom: qcs6490-audioreach: Add gpr node Prasad Kumpatla
2025-09-02 14:43 ` Bjorn Andersson
2025-09-03 9:31 ` Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 2/9] dt-bindings: pinctrl: qcom,sc7280-lpass-lpi-pinctrl: Document the clock property Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 3/9] ASoC: dt-bindings: qcom,lpass-va-macro: Update bindings for clocks to support ADSP Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 4/9] arm64: dts: qcom: sc7280: Add WSA SoundWire and LPASS support Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 5/9] arm64: dts: qcom: qcs6490-audioreach: Modify LPASS macros clock settings for audioreach Prasad Kumpatla
2025-09-02 14:47 ` Bjorn Andersson
2025-09-03 9:35 ` Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 6/9] arm64: dts: qcom: qcs6490-rb3gen2: Add WSA8830 speakers amplifier Prasad Kumpatla
2025-09-02 14:51 ` Bjorn Andersson
2025-09-03 9:38 ` Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 7/9] arm64: dts: qcom: qcs6490-rb3gen2: Add sound card Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 8/9] arm64: dts: qcom: qcm6490-idp: Add WSA8830 speakers and WCD9370 headset codec Prasad Kumpatla
2025-08-21 4:49 ` [PATCH v8 9/9] arm64: dts: qcom: qcm6490-idp: Add sound card Prasad Kumpatla
2025-08-21 13:34 ` [PATCH v8 0/9] Enable audio on qcs6490-RB3Gen2 and qcm6490-idp boards Linus Walleij
2025-08-22 17:33 ` Prasad Kumpatla
2025-08-25 9:10 ` Linus Walleij
2025-08-21 17:19 ` Rob Herring (Arm) [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=175579643373.37269.13580204801598375110.robh@kernel.org \
--to=robh@kernel.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=cros-qcom-dts-watchers@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=mohammad.rafi.shaik@oss.qualcomm.com \
--cc=quic_pkumpatl@quicinc.com \
--cc=srini@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox