Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Takashi Iwai <tiwai@suse.de>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
	linux-sound@vger.kernel.org, alsa-devel@alsa-project.org,
	Mark Brown <broonie@kernel.org>
Subject: [GIT PULL] ASoC fixes for v7.4-rc3
Date: Thu, 19 Nov 2026 22:41:25 +0000	[thread overview]
Message-ID: <1d2dffbb27f822112be2ca68c0bcf7d8@kernel.org> (raw)

The following changes since commit aebb7274476403040d582c61478df8f4a7bf9cd3:

  Linux 7.4-rc3 (2026-11-15 14:30:11 -0800)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git tags/asoc-fix-v7.4-rc3

for you to fetch changes up to f66297be665c067d2e96da9ce1c5767b587e17b7:

  ASoC: tas2781: Avoid possible zero-division (2026-11-19 17:34:26 +0000)

----------------------------------------------------------------
ASoC: Fixes for v7.4

Quite a lot of fixes here together with a few quriks for new devices,
mostly not particularly remarkable.  The Cirrus changes are relatively
large but reasonably so, there's a bunch of data table updates and a
couple of new functions needed and they come with clear reasonining.

----------------------------------------------------------------
Adolfo Morales Tena (1):
      ASoC: amd: yc: Add DMI quirk for GIGABYTE EAGLE 9MJ

Chen Yuxi (1):
      ASoC: wm8962: Fix broken headset button caused by wrong guard constant

Gaurav Suman (1):
      ASoC: codecs: wcd934x: keep MCLK enabled so init writes reach the codec

Julius Bairaktaris (2):
      ASoC: qcom: q6apm-dai: reject compress rings larger than the DMA buffer
      ASoC: qcom: q6asm-dai: reject compress rings larger than the DMA buffer

Karl Asseily (1):
      ASoC: es9039q2m: Enable the DAC clock at component probe

Louis-Alexis Eyraud (1):
      ASoC: mediatek: mt8195: Fix ETDM3_OUT DAI startup error

Marc Herrero (2):
      ASoC: qcom: audioreach: use a 32-bit container for S24_LE PCM
      ASoC: qcom: audioreach: only disconnect the route a mixer control owns

Mark Brown (4):
      ASoC: cs35l56: Series to stop writing ASP registers the driver doesn't own
      ASoC: qcom: audioreach: fix S24_LE playback and route mixer disconnects
      ASoC: qcom: qdsp6: bound the compress ring by the DMA buffer
      ASoC: meson: gx-formatter: change stream lock from mutex to spinlock

Nicholas E. Andrade (1):
      ASoC: amd: acp: fix PDM ring buffer address on ACP7.x resume

Qianghua Wang (1):
      ASoC: sn624x: add support for the SN6245 part ID

Richard Fitzgerald (2):
      ASoC: cs35l56: Only write ASP1TXn registers when widget is powered-up
      ASoC: cs35l56: Fix unwanted writes to ASP config registers

Takashi Iwai (1):
      ASoC: tas2781: Avoid possible zero-division

Tim Surber (1):
      ASoC: rockchip: i2s-tdm: Don't reset a pending clear in consumer mode

Valerio Setti (3):
      ASoC: meson: aiu-fifo: prevent sleeping when spinlock is held
      ASoC: meson: gx-formatter: change stream lock from mutex to spinlock
      ASoC: meson: gx-formatter: add lockdep_assert_held check

suso (1):
      ASoC: amd: acp: Add ACP70 ACPI flag override for LG gram 16U55U

yzddMr6 (1):
      ASoC: qcom: q6dsp-lpass-clocks: Set driver data before registering clocks

 include/sound/cs35l56.h                           |   2 +-
 sound/soc/amd/acp-config.c                        |   7 ++
 sound/soc/amd/acp/acp-legacy-common.c             |   5 +-
 sound/soc/amd/yc/acp6x-mach.c                     |   7 ++
 sound/soc/codecs/cs35l56-shared.c                 |  38 +-----
 sound/soc/codecs/cs35l56.c                        | 147 +++++++++++++++++-----
 sound/soc/codecs/cs35l56.h                        |   1 +
 sound/soc/codecs/es9039q2m.c                      |  12 ++
 sound/soc/codecs/sn624x-sdca-sdw.c                |   2 +
 sound/soc/codecs/tas2781-fmwlib.c                 |   2 +-
 sound/soc/codecs/wcd934x.c                        |   6 +
 sound/soc/codecs/wm8962.c                         |   2 +-
 sound/soc/intel/common/soc-acpi-intel-arl-match.c |  18 ++-
 sound/soc/intel/common/soc-acpi-intel-lnl-match.c |  18 ++-
 sound/soc/intel/common/soc-acpi-intel-mtl-match.c |  18 ++-
 sound/soc/intel/common/soc-acpi-intel-ptl-match.c |   9 ++
 sound/soc/mediatek/mt8195/mt8195-dai-etdm.c       |  30 ++++-
 sound/soc/meson/aiu-fifo-i2s.c                    |  15 ++-
 sound/soc/meson/aiu-fifo-spdif.c                  |  14 ++-
 sound/soc/meson/aiu-fifo.c                        |   3 +-
 sound/soc/meson/gx-formatter.c                    |  26 ++--
 sound/soc/meson/gx-formatter.h                    |   4 +
 sound/soc/meson/gx-interface.h                    |   3 +-
 sound/soc/qcom/qdsp6/audioreach.c                 |  10 +-
 sound/soc/qcom/qdsp6/q6apm-dai.c                  |   3 +
 sound/soc/qcom/qdsp6/q6asm-dai.c                  |   3 +
 sound/soc/qcom/qdsp6/q6dsp-lpass-clocks.c         |  14 +--
 sound/soc/qcom/qdsp6/topology.c                   |   4 +-
 sound/soc/rockchip/rockchip_i2s_tdm.c             |  47 +++++++
 sound/soc/sdw_utils/soc_sdw_utils.c               |  56 ++++++++-
 30 files changed, 413 insertions(+), 113 deletions(-)

                 reply	other threads:[~2026-11-19 22:42 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1d2dffbb27f822112be2ca68c0bcf7d8@kernel.org \
    --to=broonie@kernel.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-sound@vger.kernel.org \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox