From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org
Cc: alsa-devel@alsa-project.org, linux-sound@vger.kernel.org,
pierre-louis.bossart@linux.intel.com,
kai.vehmanen@linux.intel.com, ranjani.sridharan@linux.intel.com
Subject: [PATCH 10/13] ASoC: SOF: sof-pci-dev: Rely on core to create the file paths
Date: Wed, 29 Nov 2023 14:53:24 +0200 [thread overview]
Message-ID: <20231129125327.23708-11-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20231129125327.23708-1-peter.ujfalusi@linux.intel.com>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
---
sound/soc/sof/sof-pci-dev.c | 115 ++++++------------------------------
1 file changed, 17 insertions(+), 98 deletions(-)
diff --git a/sound/soc/sof/sof-pci-dev.c b/sound/soc/sof/sof-pci-dev.c
index becc85b27d51..aab5c900cecf 100644
--- a/sound/soc/sof/sof-pci-dev.c
+++ b/sound/soc/sof/sof-pci-dev.c
@@ -233,120 +233,39 @@ int sof_pci_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
sof_pdata->desc = desc;
sof_pdata->dev = dev;
- sof_pdata->ipc_type = desc->ipc_default;
+ path_override = &sof_pdata->ipc_file_profile_base;
if (sof_pci_ipc_type < 0) {
- sof_pdata->ipc_type = desc->ipc_default;
- } else {
- dev_info(dev, "overriding default IPC %d to requested %d\n",
- desc->ipc_default, sof_pci_ipc_type);
- if (sof_pci_ipc_type >= SOF_IPC_TYPE_COUNT) {
- dev_err(dev, "invalid request value %d\n", sof_pci_ipc_type);
- ret = -EINVAL;
- goto out;
- }
- if (!(BIT(sof_pci_ipc_type) & desc->ipc_supported_mask)) {
- dev_err(dev, "invalid request value %d, supported mask is %#x\n",
- sof_pci_ipc_type, desc->ipc_supported_mask);
- ret = -EINVAL;
- goto out;
- }
- sof_pdata->ipc_type = sof_pci_ipc_type;
- }
-
- if (fw_filename) {
- sof_pdata->fw_filename = fw_filename;
-
- dev_dbg(dev, "Module parameter used, changed fw filename to %s\n",
- sof_pdata->fw_filename);
+ path_override->ipc_type = desc->ipc_default;
+ } else if (sof_pci_ipc_type < SOF_IPC_TYPE_COUNT) {
+ path_override->ipc_type = sof_pci_ipc_type;
} else {
- sof_pdata->fw_filename = desc->default_fw_filename[sof_pdata->ipc_type];
+ dev_err(dev, "Invalid IPC type requested: %d\n", sof_pci_ipc_type);
+ ret = -EINVAL;
+ goto out;
}
- /*
- * for platforms using the SOF community key, change the
- * default path automatically to pick the right files from the
- * linux-firmware tree. This can be overridden with the
- * fw_path kernel parameter, e.g. for developers.
- */
-
- /* alternate fw and tplg filenames ? */
- if (fw_path) {
- sof_pdata->fw_filename_prefix = fw_path;
-
- dev_dbg(dev,
- "Module parameter used, changed fw path to %s\n",
- sof_pdata->fw_filename_prefix);
-
- } else if (dmi_check_system(community_key_platforms) && sof_dmi_use_community_key) {
- sof_pdata->fw_filename_prefix =
- devm_kasprintf(dev, GFP_KERNEL, "%s/%s",
- sof_pdata->desc->default_fw_path[sof_pdata->ipc_type],
- "community");
-
- dev_dbg(dev,
- "Platform uses community key, changed fw path to %s\n",
- sof_pdata->fw_filename_prefix);
- } else {
- sof_pdata->fw_filename_prefix =
- sof_pdata->desc->default_fw_path[sof_pdata->ipc_type];
- }
+ path_override->fw_path = fw_path;
+ path_override->fw_name = fw_filename;
+ path_override->fw_lib_path = lib_path;
+ path_override->tplg_path = tplg_path;
- if (lib_path) {
- sof_pdata->fw_lib_prefix = lib_path;
-
- dev_dbg(dev, "Module parameter used, changed fw_lib path to %s\n",
- sof_pdata->fw_lib_prefix);
-
- } else if (sof_pdata->desc->default_lib_path[sof_pdata->ipc_type]) {
- if (dmi_check_system(community_key_platforms) && sof_dmi_use_community_key) {
- sof_pdata->fw_lib_prefix =
- devm_kasprintf(dev, GFP_KERNEL, "%s/%s",
- sof_pdata->desc->default_lib_path[sof_pdata->ipc_type],
- "community");
-
- dev_dbg(dev,
- "Platform uses community key, changed fw_lib path to %s\n",
- sof_pdata->fw_lib_prefix);
- } else {
- sof_pdata->fw_lib_prefix =
- sof_pdata->desc->default_lib_path[sof_pdata->ipc_type];
- }
+ if (dmi_check_system(community_key_platforms) &&
+ sof_dmi_use_community_key) {
+ path_override->fw_path_postfix = "community";
+ path_override->fw_lib_path_postfix = "community";
}
- if (tplg_path)
- sof_pdata->tplg_filename_prefix = tplg_path;
- else
- sof_pdata->tplg_filename_prefix =
- sof_pdata->desc->default_tplg_path[sof_pdata->ipc_type];
-
/*
* the topology filename will be provided in the machine descriptor, unless
* it is overridden by a module parameter or DMI quirk.
*/
if (tplg_filename) {
- sof_pdata->tplg_filename = tplg_filename;
-
- dev_dbg(dev, "Module parameter used, changed tplg filename to %s\n",
- sof_pdata->tplg_filename);
+ path_override->tplg_name = tplg_filename;
} else {
dmi_check_system(sof_tplg_table);
if (sof_dmi_override_tplg_name)
- sof_pdata->tplg_filename = sof_dmi_override_tplg_name;
- }
-
- path_override = &sof_pdata->ipc_file_profile_base;
- path_override->ipc_type = sof_pdata->ipc_type;
- path_override->fw_path = fw_path;
- path_override->fw_name = fw_filename;
- path_override->fw_lib_path = lib_path;
- path_override->tplg_path = tplg_path;
- path_override->tplg_name = sof_pdata->tplg_filename;
-
- if (dmi_check_system(community_key_platforms) &&
- sof_dmi_use_community_key) {
- path_override->fw_path_postfix = "community";
- path_override->fw_lib_path_postfix = "community";
+ path_override->tplg_name = sof_dmi_override_tplg_name;
}
/* set callback to be called on successful device probe to enable runtime_pm */
--
2.43.0
next prev parent reply other threads:[~2023-11-29 12:53 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 12:53 [PATCH 00/13] ASoC: SOF: IPC path handling and fallback support Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 01/13] ASoC: SOF: Move sof_of_machine_select() to sof-of-dev.c from sof-audio.c Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 02/13] ASoC: SOF: Move sof_machine_* functions from sof-audio.c to core.c Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 03/13] ASoC: SOF: Add placeholder for platform IPC type and path overrides Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 04/13] ASoC: SOF: sof-acpi-dev: Save the default " Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 05/13] ASoC: SOF: sof-of-dev: " Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 06/13] ASoC: SOF: sof-pci-dev: " Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 07/13] ASoC: SOF: core: Implement firmware, topology path setup in core Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 08/13] ASoC: SOF: sof-acpi-dev: Rely on core to create the file paths Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 09/13] ASoC: SOF: sof-of-dev: " Peter Ujfalusi
2023-11-29 12:53 ` Peter Ujfalusi [this message]
2023-11-29 12:53 ` [PATCH 11/13] ASoC: SOF: core: Add helper for initialization of paths, ops Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 12/13] ASoC: SOF: Intel: Do not use resource managed allocation for ipc4_data Peter Ujfalusi
2023-11-29 12:53 ` [PATCH 13/13] ASoC: SOF: core: Implement IPC version fallback if firmware files are missing Peter Ujfalusi
2023-11-30 14:19 ` [PATCH 00/13] ASoC: SOF: IPC path handling and fallback support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231129125327.23708-11-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=linux-sound@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox