[PATCH] ASoC: Intel: soc-acpi-intel-mtl-match: Change CS35L56 prefixes to AMPn

[Richard Fitzgerald <rf@opensource.cirrus.com>]

Change the ALSA prefix for the CS35L56 to "AMPn".

This keeps them consistent with the CS35L56 HDA driver. It also
avoids coding the chip ID into the control name, so that other
Cirrus amps with the same controls can have the same control
names.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 05fe62842804 ("ASoC: Intel: soc-acpi-intel-mtl-match: add acpi match table for cdb35l56-eight-c")
---
 sound/soc/intel/common/soc-acpi-intel-mtl-match.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/sound/soc/intel/common/soc-acpi-intel-mtl-match.c b/sound/soc/intel/common/soc-acpi-intel-mtl-match.c
index f2c17cee1a5d..feb12c6c85d1 100644
--- a/sound/soc/intel/common/soc-acpi-intel-mtl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-mtl-match.c
@@ -352,13 +352,13 @@ static const struct snd_soc_acpi_adr_device cs35l56_1_adr[] = {
 		.adr = 0x00013701FA355601ull,
 		.num_endpoints = 1,
 		.endpoints = &spk_r_endpoint,
-		.name_prefix = "cs35l56-8"
+		.name_prefix = "AMP8"
 	},
 	{
 		.adr = 0x00013601FA355601ull,
 		.num_endpoints = 1,
 		.endpoints = &spk_3_endpoint,
-		.name_prefix = "cs35l56-7"
+		.name_prefix = "AMP7"
 	}
 };
 
@@ -367,13 +367,13 @@ static const struct snd_soc_acpi_adr_device cs35l56_2_adr[] = {
 		.adr = 0x00023301FA355601ull,
 		.num_endpoints = 1,
 		.endpoints = &spk_l_endpoint,
-		.name_prefix = "cs35l56-1"
+		.name_prefix = "AMP1"
 	},
 	{
 		.adr = 0x00023201FA355601ull,
 		.num_endpoints = 1,
 		.endpoints = &spk_2_endpoint,
-		.name_prefix = "cs35l56-2"
+		.name_prefix = "AMP2"
 	}
 };
 
-- 
2.30.2