From: Richard Fitzgerald <rf@opensource.cirrus.com>
To: <broonie@kernel.org>, <pierre-louis.bossart@linux.intel.com>,
<peter.ujfalusi@linux.intel.com>,
<yung-chuan.liao@linux.intel.com>, <kai.vehmanen@linux.intel.com>,
<cezary.rojewski@intel.com>, <ranjani.sridharan@linux.intel.com>
Cc: <alsa-devel@alsa-project.org>, <linux-sound@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <patches@opensource.cirrus.com>,
"Richard Fitzgerald" <rf@opensource.cirrus.com>
Subject: [PATCH] ASoC: Intel: sof_sdw_cs_amp: Connect outputs to a speaker widget
Date: Tue, 5 Dec 2023 13:50:01 +0000 [thread overview]
Message-ID: <20231205135001.2506070-1-rf@opensource.cirrus.com> (raw)
Hookup the CS35L56 DAPM_OUTPUT widgets to a DAPM_SPK widget so
that there is a complete logical path to a speaker.
There is no particular reason to use multiple speaker widgets.
The CS35L56 are designed to work together as a set so they have
all been connected to a single speaker widget.
Instead of a hardcoded list of codec widget names, the code walks
through all the codecs on the dailink and for every cs35l56 it uses
its name prefix to construct the source end of the route. This adds
a small amount of overhead during probe but has the benefit that it
isn't dependent on every system using the same prefixes.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
---
sound/soc/intel/boards/sof_sdw_cs_amp.c | 30 +++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/boards/sof_sdw_cs_amp.c b/sound/soc/intel/boards/sof_sdw_cs_amp.c
index 98f6546f484b..f88c01552a92 100644
--- a/sound/soc/intel/boards/sof_sdw_cs_amp.c
+++ b/sound/soc/intel/boards/sof_sdw_cs_amp.c
@@ -9,15 +9,24 @@
#include <linux/errno.h>
#include <sound/soc.h>
#include <sound/soc-acpi.h>
+#include <sound/soc-dai.h>
#include "sof_sdw_common.h"
#define CODEC_NAME_SIZE 8
+static const struct snd_soc_dapm_widget sof_widgets[] = {
+ SND_SOC_DAPM_SPK("Speakers", NULL),
+};
+
static int cs_spk_init(struct snd_soc_pcm_runtime *rtd)
{
const char *dai_name = rtd->dai_link->codecs->dai_name;
struct snd_soc_card *card = rtd->card;
char codec_name[CODEC_NAME_SIZE];
+ char widget_name[16];
+ struct snd_soc_dapm_route route = { "Speakers", NULL, widget_name };
+ struct snd_soc_dai *codec_dai;
+ int i, ret;
snprintf(codec_name, CODEC_NAME_SIZE, "%s", dai_name);
card->components = devm_kasprintf(card->dev, GFP_KERNEL,
@@ -26,17 +35,34 @@ static int cs_spk_init(struct snd_soc_pcm_runtime *rtd)
if (!card->components)
return -ENOMEM;
+ ret = snd_soc_dapm_new_controls(&card->dapm, sof_widgets,
+ ARRAY_SIZE(sof_widgets));
+ if (ret) {
+ dev_err(card->dev, "widgets addition failed: %d\n", ret);
+ return ret;
+ }
+
+ for_each_rtd_codec_dais(rtd, i, codec_dai) {
+ if (!strstr(codec_dai->name, "cs35l56"))
+ continue;
+
+ snprintf(widget_name, sizeof(widget_name), "%s SPK",
+ codec_dai->component->name_prefix);
+ ret = snd_soc_dapm_add_routes(&card->dapm, &route, 1);
+ if (ret)
+ return ret;
+ }
+
return 0;
}
-
int sof_sdw_cs_amp_init(struct snd_soc_card *card,
const struct snd_soc_acpi_link_adr *link,
struct snd_soc_dai_link *dai_links,
struct sof_sdw_codec_info *info,
bool playback)
{
- /* Count amp number and do init on playback link only. */
+ /* Do init on playback link only. */
if (!playback)
return 0;
--
2.30.2
next reply other threads:[~2023-12-05 13:50 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-05 13:50 Richard Fitzgerald [this message]
2023-12-05 14:08 ` [PATCH] ASoC: Intel: sof_sdw_cs_amp: Connect outputs to a speaker widget Charles Keepax
2023-12-05 15:22 ` Pierre-Louis Bossart
2023-12-06 13:12 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231205135001.2506070-1-rf@opensource.cirrus.com \
--to=rf@opensource.cirrus.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=cezary.rojewski@intel.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=patches@opensource.cirrus.com \
--cc=peter.ujfalusi@linux.intel.com \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox