From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: linux-sound@vger.kernel.org
Cc: alsa-devel@alsa-project.org, tiwai@suse.de, broonie@kernel.org,
"Pierre-Louis Bossart" <pierre-louis.bossart@linux.intel.com>,
"Bard Liao" <yung-chuan.liao@linux.intel.com>,
"Péter Ujfalusi" <peter.ujfalusi@linux.intel.com>
Subject: [PATCH] ASoC: hdac_hda: improve error logs
Date: Mon, 25 Mar 2024 17:19:25 -0500 [thread overview]
Message-ID: <20240325221925.206507-1-pierre-louis.bossart@linux.intel.com> (raw)
We have a couple of duplicate logs and missing information, add
__func__ consistently and make sure useful error codes are logged.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
---
sound/soc/codecs/hdac_hda.c | 44 ++++++++++++++++++++-----------------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/sound/soc/codecs/hdac_hda.c b/sound/soc/codecs/hdac_hda.c
index 6aa3223985be..29c88de5508b 100644
--- a/sound/soc/codecs/hdac_hda.c
+++ b/sound/soc/codecs/hdac_hda.c
@@ -230,7 +230,8 @@ static int hdac_hda_dai_hw_params(struct snd_pcm_substream *substream,
format_val = snd_hdac_stream_format(params_channels(params), bits, params_rate(params));
if (!format_val) {
dev_err(dai->dev,
- "invalid format_val, rate=%d, ch=%d, format=%d, maxbps=%d\n",
+ "%s: invalid format_val, rate=%d, ch=%d, format=%d, maxbps=%d\n",
+ __func__,
params_rate(params), params_channels(params),
params_format(params), maxbps);
@@ -266,14 +267,12 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
struct snd_soc_component *component = dai->component;
struct hda_pcm_stream *hda_stream;
struct hdac_hda_priv *hda_pvt;
- struct hdac_device *hdev;
unsigned int format_val;
struct hda_pcm *pcm;
unsigned int stream;
int ret = 0;
hda_pvt = snd_soc_component_get_drvdata(component);
- hdev = &hda_pvt->codec->core;
pcm = snd_soc_find_pcm_from_dai(hda_pvt, dai);
if (!pcm)
return -EINVAL;
@@ -286,7 +285,7 @@ static int hdac_hda_dai_prepare(struct snd_pcm_substream *substream,
ret = snd_hda_codec_prepare(hda_pvt->codec, hda_stream,
stream, format_val, substream);
if (ret < 0)
- dev_err(&hdev->dev, "codec prepare failed %d\n", ret);
+ dev_err(dai->dev, "%s: failed %d\n", __func__, ret);
return ret;
}
@@ -298,6 +297,7 @@ static int hdac_hda_dai_open(struct snd_pcm_substream *substream,
struct hdac_hda_priv *hda_pvt;
struct hda_pcm_stream *hda_stream;
struct hda_pcm *pcm;
+ int ret;
hda_pvt = snd_soc_component_get_drvdata(component);
pcm = snd_soc_find_pcm_from_dai(hda_pvt, dai);
@@ -308,7 +308,11 @@ static int hdac_hda_dai_open(struct snd_pcm_substream *substream,
hda_stream = &pcm->stream[substream->stream];
- return hda_stream->ops.open(hda_stream, hda_pvt->codec, substream);
+ ret = hda_stream->ops.open(hda_stream, hda_pvt->codec, substream);
+ if (ret < 0)
+ dev_err(dai->dev, "%s: failed %d\n", __func__, ret);
+
+ return ret;
}
static void hdac_hda_dai_close(struct snd_pcm_substream *substream,
@@ -367,7 +371,7 @@ static struct hda_pcm *snd_soc_find_pcm_from_dai(struct hdac_hda_priv *hda_pvt,
pcm_name = "HDMI 3";
break;
default:
- dev_err(&hcodec->core.dev, "invalid dai id %d\n", dai->id);
+ dev_err(dai->dev, "%s: invalid dai id %d\n", __func__, dai->id);
return NULL;
}
@@ -381,7 +385,7 @@ static struct hda_pcm *snd_soc_find_pcm_from_dai(struct hdac_hda_priv *hda_pvt,
}
}
- dev_err(&hcodec->core.dev, "didn't find PCM for DAI %s\n", dai->name);
+ dev_err(dai->dev, "%s: didn't find PCM for DAI %s\n", __func__, dai->name);
return NULL;
}
@@ -411,7 +415,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
hlink = snd_hdac_ext_bus_get_hlink_by_name(hdev->bus, dev_name(&hdev->dev));
if (!hlink) {
- dev_err(&hdev->dev, "hdac link not found\n");
+ dev_err(&hdev->dev, "%s: hdac link not found\n", __func__);
return -EIO;
}
@@ -429,7 +433,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
ret = snd_hda_codec_device_new(hcodec->bus, component->card->snd_card,
hdev->addr, hcodec, true);
if (ret < 0) {
- dev_err(&hdev->dev, "failed to create hda codec %d\n", ret);
+ dev_err(&hdev->dev, "%s: failed to create hda codec %d\n", __func__, ret);
goto error_no_pm;
}
@@ -446,7 +450,7 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
if (fw) {
ret = snd_hda_load_patch(hcodec->bus, fw->size, fw->data);
if (ret < 0) {
- dev_err(&hdev->dev, "failed to load hda patch %d\n", ret);
+ dev_err(&hdev->dev, "%s: failed to load hda patch %d\n", __func__, ret);
goto error_no_pm;
}
release_firmware(fw);
@@ -470,13 +474,13 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
ret = snd_hda_codec_set_name(hcodec, hcodec->preset->name);
if (ret < 0) {
- dev_err(&hdev->dev, "name failed %s\n", hcodec->preset->name);
+ dev_err(&hdev->dev, "%s: name failed %s\n", __func__, hcodec->preset->name);
goto error_pm;
}
ret = snd_hdac_regmap_init(&hcodec->core);
if (ret < 0) {
- dev_err(&hdev->dev, "regmap init failed\n");
+ dev_err(&hdev->dev, "%s: regmap init failed\n", __func__);
goto error_pm;
}
@@ -484,16 +488,16 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
if (patch) {
ret = patch(hcodec);
if (ret < 0) {
- dev_err(&hdev->dev, "patch failed %d\n", ret);
+ dev_err(&hdev->dev, "%s: patch failed %d\n", __func__, ret);
goto error_regmap;
}
} else {
- dev_dbg(&hdev->dev, "no patch file found\n");
+ dev_dbg(&hdev->dev, "%s: no patch file found\n", __func__);
}
ret = snd_hda_codec_parse_pcms(hcodec);
if (ret < 0) {
- dev_err(&hdev->dev, "unable to map pcms to dai %d\n", ret);
+ dev_err(&hdev->dev, "%s: unable to map pcms to dai %d\n", __func__, ret);
goto error_patch;
}
@@ -501,8 +505,8 @@ static int hdac_hda_codec_probe(struct snd_soc_component *component)
if (!is_hdmi_codec(hcodec)) {
ret = snd_hda_codec_build_controls(hcodec);
if (ret < 0) {
- dev_err(&hdev->dev, "unable to create controls %d\n",
- ret);
+ dev_err(&hdev->dev, "%s: unable to create controls %d\n",
+ __func__, ret);
goto error_patch;
}
}
@@ -548,7 +552,7 @@ static void hdac_hda_codec_remove(struct snd_soc_component *component)
hlink = snd_hdac_ext_bus_get_hlink_by_name(hdev->bus, dev_name(&hdev->dev));
if (!hlink) {
- dev_err(&hdev->dev, "hdac link not found\n");
+ dev_err(&hdev->dev, "%s: hdac link not found\n", __func__);
return;
}
@@ -624,7 +628,7 @@ static int hdac_hda_dev_probe(struct hdac_device *hdev)
/* hold the ref while we probe */
hlink = snd_hdac_ext_bus_get_hlink_by_name(hdev->bus, dev_name(&hdev->dev));
if (!hlink) {
- dev_err(&hdev->dev, "hdac link not found\n");
+ dev_err(&hdev->dev, "%s: hdac link not found\n", __func__);
return -EIO;
}
snd_hdac_ext_bus_link_get(hdev->bus, hlink);
@@ -640,7 +644,7 @@ static int hdac_hda_dev_probe(struct hdac_device *hdev)
ARRAY_SIZE(hdac_hda_dais));
if (ret < 0) {
- dev_err(&hdev->dev, "failed to register HDA codec %d\n", ret);
+ dev_err(&hdev->dev, "%s: failed to register HDA codec %d\n", __func__, ret);
return ret;
}
--
2.40.1
next reply other threads:[~2024-03-25 22:19 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-25 22:19 Pierre-Louis Bossart [this message]
2024-03-26 12:51 ` [PATCH] ASoC: hdac_hda: improve error logs Mark Brown
2024-03-28 20:34 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240325221925.206507-1-pierre-louis.bossart@linux.intel.com \
--to=pierre-louis.bossart@linux.intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=peter.ujfalusi@linux.intel.com \
--cc=tiwai@suse.de \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox