From: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
To: lgirdwood@gmail.com, broonie@kernel.org, tiwai@suse.de
Cc: linux-sound@vger.kernel.org,
pierre-louis.bossart@linux.intel.com,
kai.vehmanen@linux.intel.com, yung-chuan.liao@linux.intel.com,
liam.r.girdwood@intel.com, ranjani.sridharan@linux.intel.com,
perex@perex.cz
Subject: [PATCH 2/5] ALSA: hda: hdac_controller: Implement support for use_pio_for_commands mode
Date: Tue, 9 Apr 2024 11:38:09 +0300 [thread overview]
Message-ID: <20240409083812.14001-3-peter.ujfalusi@linux.intel.com> (raw)
In-Reply-To: <20240409083812.14001-1-peter.ujfalusi@linux.intel.com>
In case the use_pio_for_commands flag is set we must not enable the
CORB DMA to make sure that it is not interfering with the immediate
command mode.
Convert the snd_hdac_bus_send_cmd/snd_hdac_bus_get_response as wrappers to
call either the PIO or CORB based command handling depending on the
use_pio_for_commands flag.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
---
sound/hda/hdac_controller.c | 127 ++++++++++++++++++++++++++++++++++--
1 file changed, 120 insertions(+), 7 deletions(-)
diff --git a/sound/hda/hdac_controller.c b/sound/hda/hdac_controller.c
index 7f3a000fab0c..b5c833b9f8b9 100644
--- a/sound/hda/hdac_controller.c
+++ b/sound/hda/hdac_controller.c
@@ -62,7 +62,8 @@ void snd_hdac_bus_init_cmd_io(struct hdac_bus *bus)
azx_clear_corbrp(bus);
/* enable corb dma */
- snd_hdac_chip_writeb(bus, CORBCTL, AZX_CORBCTL_RUN);
+ if (!bus->use_pio_for_commands)
+ snd_hdac_chip_writeb(bus, CORBCTL, AZX_CORBCTL_RUN);
/* RIRB set up */
bus->rirb.addr = bus->rb.addr + 2048;
@@ -135,14 +136,94 @@ static unsigned int azx_command_addr(u32 cmd)
return addr;
}
+/* receive an Immediate Response with PIO */
+static int snd_hdac_bus_wait_for_pio_response(struct hdac_bus *bus,
+ unsigned int addr)
+{
+ int timeout = 50;
+
+ while (timeout--) {
+ /* check IRV bit */
+ if (snd_hdac_chip_readw(bus, IRS) & AZX_IRS_VALID) {
+ /* reuse rirb.res as the response return value */
+ bus->rirb.res[addr] = snd_hdac_chip_readl(bus, IR);
+ return 0;
+ }
+ udelay(1);
+ }
+
+ dev_dbg_ratelimited(bus->dev, "get_response_pio timeout: IRS=%#x\n",
+ snd_hdac_chip_readw(bus, IRS));
+
+ bus->rirb.res[addr] = -1;
+
+ return -EIO;
+}
+
/**
- * snd_hdac_bus_send_cmd - send a command verb via CORB
+ * snd_hdac_bus_send_cmd_pio - send a command verb via Immediate Command
* @bus: HD-audio core bus
* @val: encoded verb value to send
*
* Returns zero for success or a negative error code.
*/
-int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val)
+static int snd_hdac_bus_send_cmd_pio(struct hdac_bus *bus, unsigned int val)
+{
+ unsigned int addr = azx_command_addr(val);
+ int timeout = 50;
+ int ret = -EIO;
+
+ spin_lock_irq(&bus->reg_lock);
+
+ while (timeout--) {
+ /* check ICB bit */
+ if (!((snd_hdac_chip_readw(bus, IRS) & AZX_IRS_BUSY))) {
+ /* Clear IRV bit */
+ snd_hdac_chip_updatew(bus, IRS, AZX_IRS_VALID, AZX_IRS_VALID);
+ snd_hdac_chip_writel(bus, IC, val);
+ /* Set ICB bit */
+ snd_hdac_chip_updatew(bus, IRS, AZX_IRS_BUSY, AZX_IRS_BUSY);
+
+ ret = snd_hdac_bus_wait_for_pio_response(bus, addr);
+ goto out;
+ }
+ udelay(1);
+ }
+
+ dev_dbg_ratelimited(bus->dev, "send_cmd_pio timeout: IRS=%#x, val=%#x\n",
+ snd_hdac_chip_readw(bus, IRS), val);
+
+out:
+ spin_unlock_irq(&bus->reg_lock);
+
+ return ret;
+}
+
+/**
+ * snd_hdac_bus_get_response_pio - receive a response via Immediate Response
+ * @bus: HD-audio core bus
+ * @addr: codec address
+ * @res: pointer to store the value, NULL when not needed
+ *
+ * Returns zero if a value is read, or a negative error code.
+ */
+static int snd_hdac_bus_get_response_pio(struct hdac_bus *bus,
+ unsigned int addr, unsigned int *res)
+{
+ if (res)
+ *res = bus->rirb.res[addr];
+
+ return 0;
+}
+
+/**
+ * snd_hdac_bus_send_cmd_corb - send a command verb via CORB
+ * @bus: HD-audio core bus
+ * @val: encoded verb value to send
+ *
+ * Returns zero for success or a negative error code.
+ */
+static int snd_hdac_bus_send_cmd_corb(struct hdac_bus *bus, unsigned int val)
{
unsigned int addr = azx_command_addr(val);
unsigned int wp, rp;
@@ -176,7 +257,6 @@ int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val)
return 0;
}
-EXPORT_SYMBOL_GPL(snd_hdac_bus_send_cmd);
#define AZX_RIRB_EX_UNSOL_EV (1<<4)
@@ -234,15 +314,15 @@ void snd_hdac_bus_update_rirb(struct hdac_bus *bus)
EXPORT_SYMBOL_GPL(snd_hdac_bus_update_rirb);
/**
- * snd_hdac_bus_get_response - receive a response via RIRB
+ * snd_hdac_bus_get_response_rirb - receive a response via RIRB
* @bus: HD-audio core bus
* @addr: codec address
* @res: pointer to store the value, NULL when not needed
*
* Returns zero if a value is read, or a negative error code.
*/
-int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr,
- unsigned int *res)
+static int snd_hdac_bus_get_response_rirb(struct hdac_bus *bus,
+ unsigned int addr, unsigned int *res)
{
unsigned long timeout;
unsigned long loopcounter;
@@ -293,6 +373,39 @@ int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr,
return -EIO;
}
+
+/**
+ * snd_hdac_bus_send_cmd - send a command verb via CORB or PIO
+ * @bus: HD-audio core bus
+ * @val: encoded verb value to send
+ *
+ * Returns zero for success or a negative error code.
+ */
+int snd_hdac_bus_send_cmd(struct hdac_bus *bus, unsigned int val)
+{
+ if (bus->use_pio_for_commands)
+ return snd_hdac_bus_send_cmd_pio(bus, val);
+
+ return snd_hdac_bus_send_cmd_corb(bus, val);
+}
+EXPORT_SYMBOL_GPL(snd_hdac_bus_send_cmd);
+
+/**
+ * snd_hdac_bus_get_response - receive a response via RIRB or PIO
+ * @bus: HD-audio core bus
+ * @addr: codec address
+ * @res: pointer to store the value, NULL when not needed
+ *
+ * Returns zero if a value is read, or a negative error code.
+ */
+int snd_hdac_bus_get_response(struct hdac_bus *bus, unsigned int addr,
+ unsigned int *res)
+{
+ if (bus->use_pio_for_commands)
+ return snd_hdac_bus_get_response_pio(bus, addr, res);
+
+ return snd_hdac_bus_get_response_rirb(bus, addr, res);
+}
EXPORT_SYMBOL_GPL(snd_hdac_bus_get_response);
#define HDAC_MAX_CAPS 10
--
2.44.0
next prev parent reply other threads:[~2024-04-09 8:38 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-09 8:38 [PATCH 0/5] ALSA: hda / ASoC: SOF: Add support for PIO command mode Peter Ujfalusi
2024-04-09 8:38 ` [PATCH 1/5] ALSA: hda: Introduce flags to force commands via PIO instead of CORB Peter Ujfalusi
2024-04-09 8:38 ` Peter Ujfalusi [this message]
2024-04-09 8:38 ` [PATCH 3/5] ALSA: pci: hda: hda_controller: Add support for use_pio_for_commands mode Peter Ujfalusi
2024-04-09 8:38 ` [PATCH 4/5] ALSA: hda: Intel: Select AZX_DCAPS_PIO_COMMANDS for Lunar Lake Peter Ujfalusi
2024-04-09 8:38 ` [PATCH 5/5] ASoC: SOF: Intel: hda-bus: Use PIO mode " Peter Ujfalusi
2024-04-09 11:56 ` Mark Brown
2024-04-09 8:53 ` [PATCH 0/5] ALSA: hda / ASoC: SOF: Add support for PIO command mode Jaroslav Kysela
2024-04-10 8:56 ` Péter Ujfalusi
2024-04-18 6:39 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240409083812.14001-3-peter.ujfalusi@linux.intel.com \
--to=peter.ujfalusi@linux.intel.com \
--cc=broonie@kernel.org \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=liam.r.girdwood@intel.com \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=ranjani.sridharan@linux.intel.com \
--cc=tiwai@suse.de \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox