From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Takashi Iwai <tiwai@suse.com>,
Jaroslav Kysela <perex@perex.cz>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor.dooley@microchip.com>
Cc: Walker Chen <walker.chen@starfivetech.com>,
Xingyu Wu <xingyu.wu@starfivetech.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
alsa-devel@alsa-project.org, linux-sound@vger.kernel.org
Subject: [PATCH v2 1/2] ASoC: dt-bindings: Add PDM controller for the StarFive JH8100 SoC
Date: Tue, 23 Apr 2024 16:34:04 +0800 [thread overview]
Message-ID: <20240423083405.263912-2-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20240423083405.263912-1-xingyu.wu@starfivetech.com>
Add bindings about the PDM controller for the StarFive JH8100 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
.../bindings/sound/starfive,jh8100-pdm.yaml | 82 +++++++++++++++++++
1 file changed, 82 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/starfive,jh8100-pdm.yaml
diff --git a/Documentation/devicetree/bindings/sound/starfive,jh8100-pdm.yaml b/Documentation/devicetree/bindings/sound/starfive,jh8100-pdm.yaml
new file mode 100644
index 000000000000..50401e177f41
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/starfive,jh8100-pdm.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/starfive,jh8100-pdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH8100 PDM controller
+
+description: |
+ The Pulse Density Modulation (PDM) controller is a digital PDM out
+ microphone interface controller and decoder that supports both up to 4
+ channels, and an Inter-IC Sound (I2S) transmitter that outputs standard
+ stereo audio data to another device. The I2S transmitter can be
+ configured to operate either a master or a slave (default mode). The PDM
+ controller includes two PDM blocks, each PDM block can drive one
+ bitstream sampling clock and two bitstream coming data (mono/stereo)
+ with sampling clock rising and falling edge.
+
+maintainers:
+ - Xingyu Wu <xingyu.wu@starfivetech.com>
+ - Walker Chen <walker.chen@starfivetech.com>
+
+allOf:
+ - $ref: dai-common.yaml#
+
+properties:
+ compatible:
+ const: starfive,jh8100-pdm
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: DMIC output clock
+ - description: Main ICG clock
+
+ clock-names:
+ items:
+ - const: dmic
+ - const: icg
+
+ resets:
+ maxItems: 1
+
+ "#sound-dai-cells":
+ const: 0
+
+ starfive,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to System Register Controller sys_syscon_ne node.
+ - description: PDM source enabled control offset of SYS_SYSCON_NE register.
+ - description: PDM source enabled control mask
+ description:
+ The phandle to System Register Controller syscon node and the PDM source
+ from I2S enabled control offset and mask of SYS_SYSCON_NE register.
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - '#sound-dai-cells'
+ - starfive,syscon
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ pdm@12250000 {
+ compatible = "starfive,jh8100-pdm";
+ reg = <0x12250000 0x1000>;
+ clocks = <&syscrg_ne 142>,
+ <&syscrg_ne 171>;
+ clock-names = "dmic", "icg";
+ resets = <&syscrg_ne 44>;
+ starfive,syscon = <&sys_syscon_ne 0xc 0xff>;
+ #sound-dai-cells = <0>;
+ };
--
2.25.1
next prev parent reply other threads:[~2024-04-23 9:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-23 8:34 [PATCH v2 0/2] Add PDM controller for StarFive JH8100 SoC Xingyu Wu
2024-04-23 8:34 ` Xingyu Wu [this message]
2024-04-23 9:49 ` [PATCH v2 1/2] ASoC: dt-bindings: Add PDM controller for the " Krzysztof Kozlowski
2024-04-24 2:12 ` Xingyu Wu
2024-05-22 8:31 ` Xingyu Wu
2024-05-22 8:35 ` Xingyu Wu
2024-04-23 8:34 ` [PATCH v2 2/2] ASoC: starfive: Add PDM controller support Xingyu Wu
2024-05-22 2:11 ` Xingyu Wu
2024-05-22 11:22 ` Mark Brown
2024-05-23 1:48 ` Xingyu Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240423083405.263912-2-xingyu.wu@starfivetech.com \
--to=xingyu.wu@starfivetech.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=conor.dooley@microchip.com \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=robh+dt@kernel.org \
--cc=tiwai@suse.com \
--cc=walker.chen@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox