[PATCH 3/9] ALSA: hda: Use *-y instead of *-objs in Makefile

[Takashi Iwai <tiwai@suse.de>]

*-objs suffix is reserved rather for (user-space) host programs while
usually *-y suffix is used for kernel drivers (although *-objs works
for that purpose for now).

Let's correct the old usages of *-objs in Makefiles.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/hda/Makefile     | 8 ++++----
 sound/hda/ext/Makefile | 2 +-
 2 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/sound/hda/Makefile b/sound/hda/Makefile
index 78f487a635f8..83cceafe0d4c 100644
--- a/sound/hda/Makefile
+++ b/sound/hda/Makefile
@@ -1,8 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
-snd-hda-core-objs := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o \
+snd-hda-core-y := hda_bus_type.o hdac_bus.o hdac_device.o hdac_sysfs.o \
 	hdac_regmap.o hdac_controller.o hdac_stream.o array.o hdmi_chmap.o
 
-snd-hda-core-objs += trace.o
+snd-hda-core-y += trace.o
 CFLAGS_trace.o := -I$(src)
 
 # for sync with i915 gfx driver
@@ -14,9 +14,9 @@ obj-$(CONFIG_SND_HDA_CORE) += snd-hda-core.o
 #extended hda
 obj-$(CONFIG_SND_HDA_EXT_CORE) += ext/
 
-snd-intel-dspcfg-objs := intel-dsp-config.o
+snd-intel-dspcfg-y := intel-dsp-config.o
 snd-intel-dspcfg-$(CONFIG_SND_INTEL_NHLT) += intel-nhlt.o
 obj-$(CONFIG_SND_INTEL_DSP_CONFIG) += snd-intel-dspcfg.o
 
-snd-intel-sdw-acpi-objs := intel-sdw-acpi.o
+snd-intel-sdw-acpi-y := intel-sdw-acpi.o
 obj-$(CONFIG_SND_INTEL_SOUNDWIRE_ACPI) += snd-intel-sdw-acpi.o
diff --git a/sound/hda/ext/Makefile b/sound/hda/ext/Makefile
index 154779bdc0ba..05883fb28d28 100644
--- a/sound/hda/ext/Makefile
+++ b/sound/hda/ext/Makefile
@@ -1,4 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
-snd-hda-ext-core-objs := hdac_ext_bus.o hdac_ext_controller.o hdac_ext_stream.o
+snd-hda-ext-core-y := hdac_ext_bus.o hdac_ext_controller.o hdac_ext_stream.o
 
 obj-$(CONFIG_SND_HDA_EXT_CORE) += snd-hda-ext-core.o
-- 
2.43.0