Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Jiaxin Yu <jiaxin.yu@mediatek.com>
To: <broonie@kernel.org>
Cc: <linux-sound@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<angelogioacchino.delregno@collabora.com>,
	Jiaxin Yu <jiaxin.yu@mediatek.com>
Subject: [PATCH] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode.
Date: Wed, 12 Jun 2024 17:41:55 +0800	[thread overview]
Message-ID: <20240612094155.23354-1-jiaxin.yu@mediatek.com> (raw)

There are two hardware connection methods for DMICs on the MT6358. In cases
where more than two DMICs are used, we need to time-multiplex these DMICs.
Therefore, we need to dynamically switch the modes of these DMICs based on
the actual usage scenarios.

            ---- DMIC1
AU_VIN0 ---
            ---- DMIC2

AU_VIN2 --- ----DMIC3

When we want to use DMIC1/2, configure it to one-wire mode. When we want to
use DMIC1/3, configure it to two-wire mode.

Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com>
---
 sound/soc/codecs/mt6358.c | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/sound/soc/codecs/mt6358.c b/sound/soc/codecs/mt6358.c
index 0284e29c11d3..3623e2a38423 100644
--- a/sound/soc/codecs/mt6358.c
+++ b/sound/soc/codecs/mt6358.c
@@ -577,6 +577,36 @@ static int mt6358_put_wov(struct snd_kcontrol *kcontrol,
 	return 0;
 }
 
+static int mt6358_dmic_mode_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+	struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+
+	ucontrol->value.integer.value[0] = priv->dmic_one_wire_mode;
+	dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+	return 0;
+}
+
+static int mt6358_dmic_mode_set(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct snd_soc_component *c = snd_soc_kcontrol_component(kcontrol);
+	struct mt6358_priv *priv = snd_soc_component_get_drvdata(c);
+	int enabled = ucontrol->value.integer.value[0];
+
+	if (priv->dmic_one_wire_mode != enabled) {
+		priv->dmic_one_wire_mode = enabled;
+		dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+		return 1;
+	}
+	dev_dbg(priv->dev, "%s() dmic_mode = %d", __func__, priv->dmic_one_wire_mode);
+
+	return 0;
+}
+
 static const DECLARE_TLV_DB_SCALE(playback_tlv, -1000, 100, 0);
 static const DECLARE_TLV_DB_SCALE(pga_tlv, 0, 600, 0);
 
@@ -599,6 +629,9 @@ static const struct snd_kcontrol_new mt6358_snd_controls[] = {
 
 	SOC_SINGLE_BOOL_EXT("Wake-on-Voice Phase2 Switch", 0,
 			    mt6358_get_wov, mt6358_put_wov),
+
+	SOC_SINGLE_BOOL_EXT("Dmic Mode Switch", 0,
+			    mt6358_dmic_mode_get, mt6358_dmic_mode_set),
 };
 
 /* MUX */
-- 
2.25.1


             reply	other threads:[~2024-06-12  9:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-12  9:41 Jiaxin Yu [this message]
2024-06-12 20:29 ` [PATCH] ASoC: mediatek: mt6358: Add "Dmic Mode Switch" kcontrol for switch DMIC mode Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240612094155.23354-1-jiaxin.yu@mediatek.com \
    --to=jiaxin.yu@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=broonie@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-sound@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox