From: Bard Liao <yung-chuan.liao@linux.intel.com>
To: linux-sound@vger.kernel.org, vkoul@kernel.org
Cc: vinod.koul@linaro.org, linux-kernel@vger.kernel.org,
tiwai@suse.de, broonie@kernel.org,
pierre-louis.bossart@linux.intel.com, bard.liao@intel.com
Subject: [PATCH 3/3] soundwire: intel: add probe-time check on link id
Date: Fri, 16 Aug 2024 10:33:31 +0800 [thread overview]
Message-ID: <20240816023331.6565-4-yung-chuan.liao@linux.intel.com> (raw)
In-Reply-To: <20240816023331.6565-1-yung-chuan.liao@linux.intel.com>
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
In older platforms, the number of links was constant and hard-coded to
4. Newer platforms can have varying number of links, so we need to add
a probe-time check to make sure the ACPI-reported information with
_DSD properties is aligned with hardware capabilities reported in the
SoundWire LCAP register.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
---
drivers/soundwire/intel.h | 7 +++++++
drivers/soundwire/intel_ace2x.c | 20 ++++++++++++++++++++
drivers/soundwire/intel_auxdevice.c | 14 ++++++++++++++
include/linux/soundwire/sdw_intel.h | 3 +++
4 files changed, 44 insertions(+)
diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h
index 68838e843b54..1db4d9d3a3ba 100644
--- a/drivers/soundwire/intel.h
+++ b/drivers/soundwire/intel.h
@@ -222,6 +222,13 @@ static inline bool sdw_intel_sync_check_cmdsync_unlocked(struct sdw_intel *sdw)
return false;
}
+static inline int sdw_intel_get_link_count(struct sdw_intel *sdw)
+{
+ if (SDW_INTEL_CHECK_OPS(sdw, get_link_count))
+ return SDW_INTEL_OPS(sdw, get_link_count)(sdw);
+ return 4; /* default on older generations */
+}
+
/* common bus management */
int intel_start_bus(struct sdw_intel *sdw);
int intel_start_bus_after_reset(struct sdw_intel *sdw);
diff --git a/drivers/soundwire/intel_ace2x.c b/drivers/soundwire/intel_ace2x.c
index 781fe0aefa68..fff312c6968d 100644
--- a/drivers/soundwire/intel_ace2x.c
+++ b/drivers/soundwire/intel_ace2x.c
@@ -706,10 +706,30 @@ static void intel_program_sdi(struct sdw_intel *sdw, int dev_num)
__func__, sdw->instance, dev_num);
}
+static int intel_get_link_count(struct sdw_intel *sdw)
+{
+ int ret;
+
+ ret = hdac_bus_eml_get_count(sdw->link_res->hbus, true, AZX_REG_ML_LEPTR_ID_SDW);
+ if (!ret) {
+ dev_err(sdw->cdns.dev, "%s: could not retrieve link count\n", __func__);
+ return -ENODEV;
+ }
+
+ if (ret > SDW_INTEL_MAX_LINKS) {
+ dev_err(sdw->cdns.dev, "%s: link count %d exceed max %d\n", __func__, ret, SDW_INTEL_MAX_LINKS);
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
const struct sdw_intel_hw_ops sdw_intel_lnl_hw_ops = {
.debugfs_init = intel_ace2x_debugfs_init,
.debugfs_exit = intel_ace2x_debugfs_exit,
+ .get_link_count = intel_get_link_count,
+
.register_dai = intel_register_dai,
.check_clock_stop = intel_check_clock_stop,
diff --git a/drivers/soundwire/intel_auxdevice.c b/drivers/soundwire/intel_auxdevice.c
index 8807e01cbf7c..d110f2b587d5 100644
--- a/drivers/soundwire/intel_auxdevice.c
+++ b/drivers/soundwire/intel_auxdevice.c
@@ -317,6 +317,20 @@ static int intel_link_probe(struct auxiliary_device *auxdev,
bus->link_id = auxdev->id;
bus->clk_stop_timeout = 1;
+ /*
+ * paranoia check: make sure ACPI-reported number of links is aligned with
+ * hardware capabilities.
+ */
+ ret = sdw_intel_get_link_count(sdw);
+ if (ret < 0) {
+ dev_err(dev, "%s: sdw_intel_get_link_count failed: %d\n", __func__, ret);
+ return ret;
+ }
+ if (ret <= sdw->instance) {
+ dev_err(dev, "%s: invalid link id %d, link count %d\n", __func__, auxdev->id, ret);
+ return -EINVAL;
+ }
+
sdw_cdns_probe(cdns);
/* Set ops */
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index edbe1d4af8f8..37ae69365fe2 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -388,6 +388,7 @@ struct sdw_intel;
/* struct intel_sdw_hw_ops - SoundWire ops for Intel platforms.
* @debugfs_init: initialize all debugfs capabilities
* @debugfs_exit: close and cleanup debugfs capabilities
+ * @get_link_count: fetch link count from hardware registers
* @register_dai: read all PDI information and register DAIs
* @check_clock_stop: throw error message if clock is not stopped.
* @start_bus: normal start
@@ -412,6 +413,8 @@ struct sdw_intel_hw_ops {
void (*debugfs_init)(struct sdw_intel *sdw);
void (*debugfs_exit)(struct sdw_intel *sdw);
+ int (*get_link_count)(struct sdw_intel *sdw);
+
int (*register_dai)(struct sdw_intel *sdw);
void (*check_clock_stop)(struct sdw_intel *sdw);
--
2.43.0
next prev parent reply other threads:[~2024-08-16 2:33 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-16 2:33 [PATCH 0/3] ALSA/ASoC/SoundWire: Intel: update maximum number of links Bard Liao
2024-08-16 2:33 ` [PATCH 1/3] ALSA/ASoC/SoundWire: Intel: use single definition for SDW_INTEL_MAX_LINKS Bard Liao
2024-08-16 11:25 ` Mark Brown
2024-08-18 7:50 ` Takashi Iwai
2024-08-16 2:33 ` [PATCH 2/3] soundwire: intel: increase maximum number of links Bard Liao
2024-08-17 17:21 ` Vinod Koul
2024-08-16 2:33 ` Bard Liao [this message]
2024-08-17 17:22 ` [PATCH 3/3] soundwire: intel: add probe-time check on link id Vinod Koul
2024-08-20 12:44 ` [PATCH 0/3] ALSA/ASoC/SoundWire: Intel: update maximum number of links Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240816023331.6565-4-yung-chuan.liao@linux.intel.com \
--to=yung-chuan.liao@linux.intel.com \
--cc=bard.liao@intel.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=pierre-louis.bossart@linux.intel.com \
--cc=tiwai@suse.de \
--cc=vinod.koul@linaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox