Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>
To: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>
Cc: linux-sound@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RFC] ASoC: simple-card-utils: fix priv->dai_props indexing
Date: Fri, 20 Dec 2024 10:12:13 -0500	[thread overview]
Message-ID: <20241220151213.2462-1-laurentiumihalcea111@gmail.com> (raw)

From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>

As of commit cb18cd26039f ("ASoC: soc-core: do rtd->id trick at
snd_soc_add_pcm_runtime()") the ID stored in the PCM runtime data can
no longer be safely used to index the priv->dai_props array. This is
because the ID may be modified during snd_soc_add_pcm_runtime(), thus
resulting in an ID that's no longer a valid array index.

To fix this, use the position of the dai_link stored inside the PCM
runtime data relative to the start of the dai_link array as index into
the priv->dai_props array.

Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
---
 include/sound/simple_card_utils.h     |  3 +++
 sound/soc/generic/simple-card-utils.c | 10 +++++-----
 2 files changed, 8 insertions(+), 5 deletions(-)

diff --git a/include/sound/simple_card_utils.h b/include/sound/simple_card_utils.h
index 3360d9eab068..0122f7871a40 100644
--- a/include/sound/simple_card_utils.h
+++ b/include/sound/simple_card_utils.h
@@ -89,6 +89,9 @@ struct simple_util_priv {
 #define simple_props_to_dai_codec(props, i)	((props)->codec_dai + i)
 #define simple_props_to_codec_conf(props, i)	((props)->codec_conf + i)
 
+#define runtime_simple_priv_to_props(priv, rtd)					\
+	((priv)->dai_props + ((rtd)->dai_link - (priv)->dai_link))
+
 #define for_each_prop_dlc_cpus(props, i, cpu)				\
 	for ((i) = 0;							\
 	     ((i) < (props)->num.cpus) &&				\
diff --git a/sound/soc/generic/simple-card-utils.c b/sound/soc/generic/simple-card-utils.c
index a0c3111f7e08..c0f94e1cf0e9 100644
--- a/sound/soc/generic/simple-card-utils.c
+++ b/sound/soc/generic/simple-card-utils.c
@@ -296,7 +296,7 @@ int simple_util_startup(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
 	struct simple_util_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct simple_dai_props *props = simple_priv_to_props(priv, rtd->id);
+	struct simple_dai_props *props = runtime_simple_priv_to_props(priv, rtd);
 	struct simple_util_dai *dai;
 	unsigned int fixed_sysclk = 0;
 	int i1, i2, i;
@@ -357,7 +357,7 @@ void simple_util_shutdown(struct snd_pcm_substream *substream)
 {
 	struct snd_soc_pcm_runtime *rtd = snd_soc_substream_to_rtd(substream);
 	struct simple_util_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct simple_dai_props *props = simple_priv_to_props(priv, rtd->id);
+	struct simple_dai_props *props = runtime_simple_priv_to_props(priv, rtd);
 	struct simple_util_dai *dai;
 	int i;
 
@@ -446,7 +446,7 @@ int simple_util_hw_params(struct snd_pcm_substream *substream,
 	struct simple_util_dai *pdai;
 	struct snd_soc_dai *sdai;
 	struct simple_util_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct simple_dai_props *props = simple_priv_to_props(priv, rtd->id);
+	struct simple_dai_props *props = runtime_simple_priv_to_props(priv, rtd);
 	unsigned int mclk, mclk_fs = 0;
 	int i, ret;
 
@@ -517,7 +517,7 @@ int simple_util_be_hw_params_fixup(struct snd_soc_pcm_runtime *rtd,
 				   struct snd_pcm_hw_params *params)
 {
 	struct simple_util_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct simple_dai_props *dai_props = simple_priv_to_props(priv, rtd->id);
+	struct simple_dai_props *dai_props = runtime_simple_priv_to_props(priv, rtd);
 	struct simple_util_data *data = &dai_props->adata;
 	struct snd_interval *rate = hw_param_interval(params, SNDRV_PCM_HW_PARAM_RATE);
 	struct snd_interval *channels = hw_param_interval(params, SNDRV_PCM_HW_PARAM_CHANNELS);
@@ -628,7 +628,7 @@ static int simple_init_for_codec2codec(struct snd_soc_pcm_runtime *rtd,
 int simple_util_dai_init(struct snd_soc_pcm_runtime *rtd)
 {
 	struct simple_util_priv *priv = snd_soc_card_get_drvdata(rtd->card);
-	struct simple_dai_props *props = simple_priv_to_props(priv, rtd->id);
+	struct simple_dai_props *props = runtime_simple_priv_to_props(priv, rtd);
 	struct simple_util_dai *dai;
 	int i, ret;
 
-- 
2.34.1


             reply	other threads:[~2024-12-20 15:13 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-12-20 15:12 Laurentiu Mihalcea [this message]
2024-12-23  0:48 ` [PATCH RFC] ASoC: simple-card-utils: fix priv->dai_props indexing Kuninori Morimoto
2025-01-08 11:00   ` Laurentiu Mihalcea
2025-01-09  0:07     ` Kuninori Morimoto
2025-01-10  0:26       ` Laurentiu Mihalcea
2025-01-10  2:25         ` Kuninori Morimoto
2025-01-11  1:10           ` Laurentiu Mihalcea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241220151213.2462-1-laurentiumihalcea111@gmail.com \
    --to=laurentiumihalcea111@gmail.com \
    --cc=broonie@kernel.org \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox