From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: "Bard Liao" <yung-chuan.liao@linux.intel.com>,
"Ranjani Sridharan" <ranjani.sridharan@linux.intel.com>,
"Péter Ujfalusi" <peter.ujfalusi@linux.intel.com>,
"Liam Girdwood" <liam.r.girdwood@intel.com>,
"Mark Brown" <broonie@kernel.org>,
"Sasha Levin" <sashal@kernel.org>,
lgirdwood@gmail.com, daniel.baluta@nxp.com, perex@perex.cz,
tiwai@suse.com, pierre-louis.bossart@linux.dev,
peterz@infradead.org, kai.vehmanen@linux.intel.com,
brent.lu@intel.com, sound-open-firmware@alsa-project.org,
linux-sound@vger.kernel.org
Subject: [PATCH AUTOSEL 6.12 01/14] ASoC: SOF: Intel: hda-dai: Ensure DAI widget is valid during params
Date: Sun, 26 Jan 2025 10:07:48 -0500 [thread overview]
Message-ID: <20250126150803.962459-1-sashal@kernel.org> (raw)
From: Bard Liao <yung-chuan.liao@linux.intel.com>
[ Upstream commit 569922b82ca660f8b24e705f6cf674e6b1f99cc7 ]
Each cpu DAI should associate with a widget. However, the topology might
not create the right number of DAI widgets for aggregated amps. And it
will cause NULL pointer deference.
Check that the DAI widget associated with the CPU DAI is valid to prevent
NULL pointer deference due to missing DAI widgets in topologies with
aggregated amps.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20241203104853.56956-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/sof/intel/hda-dai.c | 12 ++++++++++++
sound/soc/sof/intel/hda.c | 5 +++++
2 files changed, 17 insertions(+)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c
index 82f46ecd94301..2e58a264da556 100644
--- a/sound/soc/sof/intel/hda-dai.c
+++ b/sound/soc/sof/intel/hda-dai.c
@@ -503,6 +503,12 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream,
int ret;
int i;
+ if (!w) {
+ dev_err(cpu_dai->dev, "%s widget not found, check amp link num in the topology\n",
+ cpu_dai->name);
+ return -EINVAL;
+ }
+
ops = hda_dai_get_ops(substream, cpu_dai);
if (!ops) {
dev_err(cpu_dai->dev, "DAI widget ops not set\n");
@@ -582,6 +588,12 @@ int sdw_hda_dai_hw_params(struct snd_pcm_substream *substream,
*/
for_each_rtd_cpu_dais(rtd, i, dai) {
w = snd_soc_dai_get_widget(dai, substream->stream);
+ if (!w) {
+ dev_err(cpu_dai->dev,
+ "%s widget not found, check amp link num in the topology\n",
+ dai->name);
+ return -EINVAL;
+ }
ipc4_copier = widget_to_copier(w);
memcpy(&ipc4_copier->dma_config_tlv[cpu_dai_id], dma_config_tlv,
sizeof(*dma_config_tlv));
diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 70fc08c8fc99e..f10ed4d102501 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -63,6 +63,11 @@ static int sdw_params_stream(struct device *dev,
struct snd_soc_dapm_widget *w = snd_soc_dai_get_widget(d, params_data->substream->stream);
struct snd_sof_dai_config_data data = { 0 };
+ if (!w) {
+ dev_err(dev, "%s widget not found, check amp link num in the topology\n",
+ d->name);
+ return -EINVAL;
+ }
data.dai_index = (params_data->link_id << 8) | d->id;
data.dai_data = params_data->alh_stream_id;
data.dai_node_id = data.dai_data;
--
2.39.5
next reply other threads:[~2025-01-26 15:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-01-26 15:07 Sasha Levin [this message]
2025-01-26 15:07 ` [PATCH AUTOSEL 6.12 03/14] ASoC: Intel: sof_sdw: Correct quirk for Lenovo Yoga Slim 7 Sasha Levin
2025-01-26 15:07 ` [PATCH AUTOSEL 6.12 09/14] ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback Sasha Levin
2025-01-26 15:07 ` [PATCH AUTOSEL 6.12 11/14] ASoC: amd: Add ACPI dependency to fix build error Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250126150803.962459-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=brent.lu@intel.com \
--cc=broonie@kernel.org \
--cc=daniel.baluta@nxp.com \
--cc=kai.vehmanen@linux.intel.com \
--cc=lgirdwood@gmail.com \
--cc=liam.r.girdwood@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=perex@perex.cz \
--cc=peter.ujfalusi@linux.intel.com \
--cc=peterz@infradead.org \
--cc=pierre-louis.bossart@linux.dev \
--cc=ranjani.sridharan@linux.intel.com \
--cc=sound-open-firmware@alsa-project.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.com \
--cc=yung-chuan.liao@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox