Linux Sound subsystem development
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Hector Martin <marcan@marcan.st>, Mark Brown <broonie@kernel.org>,
	Sasha Levin <sashal@kernel.org>,
	shenghao-ding@ti.com, kevin-lu@ti.com, baojun.xu@ti.com,
	lgirdwood@gmail.com, perex@perex.cz, tiwai@suse.com,
	linux-sound@vger.kernel.org
Subject: [PATCH AUTOSEL 6.1 158/212] ASoC: tas2764: Power up/down amp on mute ops
Date: Mon,  5 May 2025 19:05:30 -0400	[thread overview]
Message-ID: <20250505230624.2692522-158-sashal@kernel.org> (raw)
In-Reply-To: <20250505230624.2692522-1-sashal@kernel.org>

From: Hector Martin <marcan@marcan.st>

[ Upstream commit 1c3b5f37409682184669457a5bdf761268eafbe5 ]

The ASoC convention is that clocks are removed after codec mute, and
power up/down is more about top level power management. For these chips,
the "mute" state still expects a TDM clock, and yanking the clock in
this state will trigger clock errors. So, do the full
shutdown<->mute<->active transition on the mute operation, so the amp is
in software shutdown by the time the clocks are removed.

This fixes TDM clock errors when streams are stopped.

Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20250208-asoc-tas2764-v1-1-dbab892a69b5@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/tas2764.c | 51 ++++++++++++++++----------------------
 1 file changed, 21 insertions(+), 30 deletions(-)

diff --git a/sound/soc/codecs/tas2764.c b/sound/soc/codecs/tas2764.c
index 94428487a8855..10f0f07b90ff2 100644
--- a/sound/soc/codecs/tas2764.c
+++ b/sound/soc/codecs/tas2764.c
@@ -182,33 +182,6 @@ static SOC_ENUM_SINGLE_DECL(
 static const struct snd_kcontrol_new tas2764_asi1_mux =
 	SOC_DAPM_ENUM("ASI1 Source", tas2764_ASI1_src_enum);
 
-static int tas2764_dac_event(struct snd_soc_dapm_widget *w,
-			     struct snd_kcontrol *kcontrol, int event)
-{
-	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
-	struct tas2764_priv *tas2764 = snd_soc_component_get_drvdata(component);
-	int ret;
-
-	switch (event) {
-	case SND_SOC_DAPM_POST_PMU:
-		tas2764->dac_powered = true;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	case SND_SOC_DAPM_PRE_PMD:
-		tas2764->dac_powered = false;
-		ret = tas2764_update_pwr_ctrl(tas2764);
-		break;
-	default:
-		dev_err(tas2764->dev, "Unsupported event\n");
-		return -EINVAL;
-	}
-
-	if (ret < 0)
-		return ret;
-
-	return 0;
-}
-
 static const struct snd_kcontrol_new isense_switch =
 	SOC_DAPM_SINGLE("Switch", TAS2764_PWR_CTRL, TAS2764_ISENSE_POWER_EN, 1, 1);
 static const struct snd_kcontrol_new vsense_switch =
@@ -221,8 +194,7 @@ static const struct snd_soc_dapm_widget tas2764_dapm_widgets[] = {
 			    1, &isense_switch),
 	SND_SOC_DAPM_SWITCH("VSENSE", TAS2764_PWR_CTRL, TAS2764_VSENSE_POWER_EN,
 			    1, &vsense_switch),
-	SND_SOC_DAPM_DAC_E("DAC", NULL, SND_SOC_NOPM, 0, 0, tas2764_dac_event,
-			   SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
+	SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 	SND_SOC_DAPM_OUTPUT("OUT"),
 	SND_SOC_DAPM_SIGGEN("VMON"),
 	SND_SOC_DAPM_SIGGEN("IMON")
@@ -243,9 +215,28 @@ static int tas2764_mute(struct snd_soc_dai *dai, int mute, int direction)
 {
 	struct tas2764_priv *tas2764 =
 			snd_soc_component_get_drvdata(dai->component);
+	int ret;
+
+	if (!mute) {
+		tas2764->dac_powered = true;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
 
 	tas2764->unmuted = !mute;
-	return tas2764_update_pwr_ctrl(tas2764);
+	ret = tas2764_update_pwr_ctrl(tas2764);
+	if (ret)
+		return ret;
+
+	if (mute) {
+		tas2764->dac_powered = false;
+		ret = tas2764_update_pwr_ctrl(tas2764);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
 }
 
 static int tas2764_set_bitwidth(struct tas2764_priv *tas2764, int bitwidth)
-- 
2.39.5


  parent reply	other threads:[~2025-05-05 23:11 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20250505230624.2692522-1-sashal@kernel.org>
2025-05-05 23:03 ` [PATCH AUTOSEL 6.1 054/212] ASoC: mediatek: mt6359: Add stub for mt6359_accdet_enable_jack_detect Sasha Levin
2025-05-05 23:03 ` [PATCH AUTOSEL 6.1 061/212] ASoC: sun4i-codec: support hp-det-gpios property Sasha Levin
2025-05-05 23:04 ` [PATCH AUTOSEL 6.1 076/212] ASoC: qcom: sm8250: explicitly set format in sm8250_be_hw_params_fixup() Sasha Levin
2025-05-05 23:04 ` [PATCH AUTOSEL 6.1 082/212] ALSA: seq: Improve data consistency at polling Sasha Levin
2025-05-05 23:04 ` [PATCH AUTOSEL 6.1 098/212] ALSA: hda/realtek: Enable PC beep passthrough for HP EliteBook 855 G7 Sasha Levin
2025-05-05 23:05 ` [PATCH AUTOSEL 6.1 155/212] ASoC: ops: Enforce platform maximum on initial value Sasha Levin
2025-05-05 23:05 ` [PATCH AUTOSEL 6.1 156/212] ASoC: tas2764: Add reg defaults for TAS2764_INT_CLK_CFG Sasha Levin
2025-05-05 23:05 ` [PATCH AUTOSEL 6.1 157/212] ASoC: tas2764: Mark SW_RESET as volatile Sasha Levin
2025-05-05 23:05 ` Sasha Levin [this message]
2025-05-05 23:05 ` [PATCH AUTOSEL 6.1 159/212] ASoC: soc-dai: check return value at snd_soc_dai_set_tdm_slot() Sasha Levin
2025-05-05 23:06 ` [PATCH AUTOSEL 6.1 200/212] ASoC: codecs: pcm3168a: Allow for 24-bit in provider mode Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250505230624.2692522-158-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=kevin-lu@ti.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=marcan@marcan.st \
    --cc=perex@perex.cz \
    --cc=shenghao-ding@ti.com \
    --cc=stable@vger.kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox