From: "Sheetal ." <sheetal@nvidia.com>
To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <robh@kernel.org>,
<krzk+dt@kernel.org>, <conor+dt@kernel.org>
Cc: <linux-sound@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
<perex@perex.cz>, <tiwai@suse.com>,
Mohan Kumar D <mkumard@nvidia.com>, Sheetal <sheetal@nvidia.com>
Subject: [PATCH 3/3] ALSA: hda/tegra: Add Tegra264 support
Date: Mon, 12 May 2025 06:42:58 +0000 [thread overview]
Message-ID: <20250512064258.1028331-4-sheetal@nvidia.com> (raw)
In-Reply-To: <20250512064258.1028331-1-sheetal@nvidia.com>
From: Mohan Kumar D <mkumard@nvidia.com>
Update HDA driver to support Tegra264 differences from legacy HDA,
which includes: clocks/resets, always power on, and hardware-managed
FPCI/IPFS initialization. The driver retrieves this chip-specific
information from soc_data.
Signed-off-by: Mohan Kumar D <mkumard@nvidia.com>
Signed-off-by: Sheetal <sheetal@nvidia.com>
---
sound/pci/hda/hda_tegra.c | 51 +++++++++++++++++++++++++++++++++-----
sound/pci/hda/patch_hdmi.c | 1 +
2 files changed, 46 insertions(+), 6 deletions(-)
diff --git a/sound/pci/hda/hda_tegra.c b/sound/pci/hda/hda_tegra.c
index a590d431c5ff..8c0dd439f5a5 100644
--- a/sound/pci/hda/hda_tegra.c
+++ b/sound/pci/hda/hda_tegra.c
@@ -72,6 +72,10 @@
struct hda_tegra_soc {
bool has_hda2codec_2x_reset;
bool has_hda2hdmi;
+ bool has_hda2codec_2x;
+ bool input_stream;
+ bool always_on;
+ bool requires_init;
};
struct hda_tegra {
@@ -187,7 +191,9 @@ static int hda_tegra_runtime_resume(struct device *dev)
if (rc != 0)
return rc;
if (chip->running) {
- hda_tegra_init(hda);
+ if (hda->soc->requires_init)
+ hda_tegra_init(hda);
+
azx_init_chip(chip, 1);
/* disable controller wake up event*/
azx_writew(chip, WAKEEN, azx_readw(chip, WAKEEN) &
@@ -250,7 +256,8 @@ static int hda_tegra_init_chip(struct azx *chip, struct platform_device *pdev)
bus->remap_addr = hda->regs + HDA_BAR0;
bus->addr = res->start + HDA_BAR0;
- hda_tegra_init(hda);
+ if (hda->soc->requires_init)
+ hda_tegra_init(hda);
return 0;
}
@@ -323,7 +330,7 @@ static int hda_tegra_first_init(struct azx *chip, struct platform_device *pdev)
* starts with offset 0 which is wrong as HW register for output stream
* offset starts with 4.
*/
- if (of_device_is_compatible(np, "nvidia,tegra234-hda"))
+ if (!hda->soc->input_stream)
chip->capture_streams = 4;
chip->playback_streams = (gcap >> 12) & 0x0f;
@@ -419,7 +426,6 @@ static int hda_tegra_create(struct snd_card *card,
chip->driver_caps = driver_caps;
chip->driver_type = driver_caps & 0xff;
chip->dev_index = 0;
- chip->jackpoll_interval = msecs_to_jiffies(5000);
INIT_LIST_HEAD(&chip->pcm_list);
chip->codec_probe_mask = -1;
@@ -436,7 +442,16 @@ static int hda_tegra_create(struct snd_card *card,
chip->bus.core.sync_write = 0;
chip->bus.core.needs_damn_long_delay = 1;
chip->bus.core.aligned_mmio = 1;
- chip->bus.jackpoll_in_suspend = 1;
+
+ /*
+ * HDA power domain and clocks are always on for Tegra264 and
+ * the jack detection logic would work always, so no need of
+ * jack polling mechanism running.
+ */
+ if (!hda->soc->always_on) {
+ chip->jackpoll_interval = msecs_to_jiffies(5000);
+ chip->bus.jackpoll_in_suspend = 1;
+ }
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
@@ -450,22 +465,44 @@ static int hda_tegra_create(struct snd_card *card,
static const struct hda_tegra_soc tegra30_data = {
.has_hda2codec_2x_reset = true,
.has_hda2hdmi = true,
+ .has_hda2codec_2x = true,
+ .input_stream = true,
+ .always_on = false,
+ .requires_init = true,
};
static const struct hda_tegra_soc tegra194_data = {
.has_hda2codec_2x_reset = false,
.has_hda2hdmi = true,
+ .has_hda2codec_2x = true,
+ .input_stream = true,
+ .always_on = false,
+ .requires_init = true,
};
static const struct hda_tegra_soc tegra234_data = {
.has_hda2codec_2x_reset = true,
.has_hda2hdmi = false,
+ .has_hda2codec_2x = true,
+ .input_stream = false,
+ .always_on = false,
+ .requires_init = true,
+};
+
+static const struct hda_tegra_soc tegra264_data = {
+ .has_hda2codec_2x_reset = true,
+ .has_hda2hdmi = false,
+ .has_hda2codec_2x = false,
+ .input_stream = false,
+ .always_on = true,
+ .requires_init = false,
};
static const struct of_device_id hda_tegra_match[] = {
{ .compatible = "nvidia,tegra30-hda", .data = &tegra30_data },
{ .compatible = "nvidia,tegra194-hda", .data = &tegra194_data },
{ .compatible = "nvidia,tegra234-hda", .data = &tegra234_data },
+ { .compatible = "nvidia,tegra264-hda", .data = &tegra264_data },
{},
};
MODULE_DEVICE_TABLE(of, hda_tegra_match);
@@ -520,7 +557,9 @@ static int hda_tegra_probe(struct platform_device *pdev)
hda->clocks[hda->nclocks++].id = "hda";
if (hda->soc->has_hda2hdmi)
hda->clocks[hda->nclocks++].id = "hda2hdmi";
- hda->clocks[hda->nclocks++].id = "hda2codec_2x";
+
+ if (hda->soc->has_hda2codec_2x)
+ hda->clocks[hda->nclocks++].id = "hda2codec_2x";
err = devm_clk_bulk_get(&pdev->dev, hda->nclocks, hda->clocks);
if (err < 0)
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c
index 7167989a8d86..6c860fda6648 100644
--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -4551,6 +4551,7 @@ HDA_CODEC_ENTRY(0x10de002e, "Tegra186 HDMI/DP1", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de002f, "Tegra194 HDMI/DP2", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de0030, "Tegra194 HDMI/DP3", patch_tegra_hdmi),
HDA_CODEC_ENTRY(0x10de0031, "Tegra234 HDMI/DP", patch_tegra234_hdmi),
+HDA_CODEC_ENTRY(0x10de0034, "Tegra264 HDMI/DP", patch_tegra234_hdmi),
HDA_CODEC_ENTRY(0x10de0040, "GPU 40 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0041, "GPU 41 HDMI/DP", patch_nvhdmi),
HDA_CODEC_ENTRY(0x10de0042, "GPU 42 HDMI/DP", patch_nvhdmi),
--
2.17.1
next prev parent reply other threads:[~2025-05-12 6:43 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-12 6:42 [PATCH 0/2] HDA: Add Tegra264 support Sheetal .
2025-05-12 6:42 ` [PATCH 1/3] dt-bindings: Update Tegra194 and Tegra234 HDA bindings Sheetal .
2025-05-14 21:49 ` Rob Herring
2025-05-15 5:24 ` Sheetal .
2025-05-14 21:50 ` Rob Herring (Arm)
2025-05-12 6:42 ` [PATCH 2/3] dt-bindings: Document Tegra264 HDA Support Sheetal .
2025-05-14 21:52 ` Rob Herring (Arm)
2025-05-12 6:42 ` Sheetal . [this message]
2025-05-15 10:48 ` [PATCH 0/2] HDA: Add Tegra264 support Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250512064258.1028331-4-sheetal@nvidia.com \
--to=sheetal@nvidia.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mkumard@nvidia.com \
--cc=perex@perex.cz \
--cc=robh@kernel.org \
--cc=thierry.reding@gmail.com \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox